Jump to content

Screwdriver Profile


Recommended Posts

As someone new to repairing watches, a few years back, I bought a set of used screwdrivers from Dave over at Dave's Watch Parts and Tools.  The question I have is how do you all keep straight what size is what?  I'm embarrassed to say this, but I keep my set of screwdrivers in a small cigar box with all of my other "stuff" and I have to then fish for the right size.  Most of the time I just pull whatever out that I think will work.  Thankfully, I am only working on Timex movements right now, and  nothing too fancy.  What is a better solution to keeping my screwdrivers in this box?  I see some of the fairly expensive sets with these special holders, but that is a little above my pay grade at this stage of the game.

 

Thanks!

 

John

Link to comment
Share on other sites

@kd8tzc what I would do is get one of the ribbed rubber mats for tools and once sized for the length of your screwdrivers with the top button hanging over glue it into another cigar box then you can keep track of the sizes better. Mind you depending on your taste in cigars it might be cheaper just buying a rotating base or screwdriver box without the screwdrivers.

 

Tom

Link to comment
Share on other sites

3 hours ago, kd8tzc said:

Thanks Tom... I'm not sure I am following what you are saying (other than buy some more cigars 🙂 ).  Ribbed rubber mats?  Top button (of the screwdriver)?  Glue what... the mat assume?

Sorry I might have assumed somewhat, ribbed tool mat https://www.cousinsuk.com/product/ridged-bench-mats

 

what I refer to as the top button of the screwdriver is the rotating piece at the end of the screwdriver opposite from where the screw is.

 

I hope that is clearer?

 

Tom

Link to comment
Share on other sites

6 hours ago, kd8tzc said:

As someone new to repairing watches, a few years back, I bought a set of used screwdrivers from Dave over at Dave's Watch Parts and Tools.  The question I have is how do you all keep straight what size is what?  I'm embarrassed to say this, but I keep my set of screwdrivers in a small cigar box with all of my other "stuff" and I have to then fish for the right size.  Most of the time I just pull whatever out that I think will work.  Thankfully, I am only working on Timex movements right now, and  nothing too fancy.  What is a better solution to keeping my screwdrivers in this box?  I see some of the fairly expensive sets with these special holders, but that is a little above my pay grade at this stage of the game.

 

Thanks!

 

John

I use glass dried flower holders to keep screwdrivers in size order, some were 20p the bigger ones 50p. You could wrap a few turns of different coloured electrical tape around the shafts of the drivers as a reference for the size. After a short while you will  start to remember which colour is which size.

16782175380951202257516256653914.jpg

16782175925294105212927511378341.jpg

Link to comment
Share on other sites

8 hours ago, Neverenoughwatches said:

I use glass dried flower holders to keep screwdrivers in size order, some were 20p the bigger ones 50p. You could wrap a few turns of different coloured electrical tape around the shafts of the drivers as a reference for the size. After a short while you will  start to remember which colour is which size.

16782175380951202257516256653914.jpg

16782175925294105212927511378341.jpg

Where did you get the glass holders? They look perfect...

Link to comment
Share on other sites

1 hour ago, Waggy said:

Where did you get the glass holders? They look perfect...

Not sure if you have heard of these but here in the Uk we have car boots sales, very much like American yard/garage sales. People load up their cars with junk they have collected or inherited or bought from house clearances. Flock to a big field and rent a space for a day to sell it. Its great fun , every country should do it. The haggling and banter is hilarious somedays. The glass holders are an old idea i dont think you've been able to buy them new for years. The holder was placed in the bottom of a vase and grandma placed her artificial silk flowers into the holes to keep them arranged. Nobody wants them anymore so they sell for practically nothing at car boots.

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Yes i did eventually realise that the oil will act as a barrier, I'm sure the discussion will continue. Ive had two oleophobic coffees ( added coconut ) and in the meantime i have this just delivered to take my mind off epilame for the time being. My favourite type of dial, its a beautiful looking watch traditional English made and it runs,  the ticktock is phenomenal,  i can hear it across my living room .  You wont believe how much it was. Thats interesting about synthetic oils , i thought the same, going from a 2 year service to 5 years is a big drop in income for service folk.  I expect some did well when they embraced the use of synthetic,  probably drawing in more customers than those that didn't use the new fangled substances , i bet fairly short lived though. The more frequent service makes more sense to me, not for just the service but for the regular check up inspections that might pick up impending faults. As far as epilame goes, wouldn't it be great to be able to fumigate the complete movement in a sealed jar of heated stearic acid, 🤔 now theres a thought 😅.
    • Imm going to close the discussion by attaching the photo of my super-titanium after several vicissitudes finally working. Purchased as not working I replaced the battery and for a stroke of luck I found its semi-new solar panel which, having verified its operation, seems to recharge the accumulator perfectly. I had taken this watch almost by bet, with 40 euros I brought it back to life. The initial half idea was to resell it to finance another purchase, but.. it's definitely a nice item. It would need to check the impermeability but it's a pleasure to see it on the wrist 😃
    • In fact the secret is to go gently and find the way without forcing, and the movement enters without problems
    • Yea a have given it a full service this movement is chinese 2813 whats the lift angle for this movement does anyone knows  and how  do a remove the default  of 52 degrees on my timegrapher?   Hi you said my lift angle is default how do a remove this from my timegrapher?
    • Sure! Some very accomplished repairers never use epilame! I have often wondered if it is worth the trouble. Not using epilame will shorten the service intervals though, but that could be better perhaps both for the owner and the repairer!? Speaking of oiling, I just read this: After WWII in the 1950s the first Synthetic Oils came on the market. Most watchmakers did not rush to use these oils since they were bad for business now that the watch serviced with Synthetic oil would not come back to him for service for another 5-7 years he would lose a lot of income. ~Ofrei.com   Anyway, I wouldn't be surprised if it would be more correct to think of epilame as a binder rather than a repellant. Until convinced otherwise that's how I will think of epilame.
×
×
  • Create New...