Lenny Posted July 10, 2016 Posted July 10, 2016 HI EVERYONE ...I had a Seiko5 SNZG15K1 ...I started playing around with the regulator and bought a timegraph 1000 ... anyways as I was moving the beat lever the hairspring stopped . I removed the spring , wheel and cock and the spring was a mess. I just want to know do these watches come ready to regulate or do you have to turn the brass stay bits on the end that hold the spring ..I think that the spring jumped on mine .but at the time I wasn't thinking straight and ran to disassemble it when I should of looked a bit closer back then ..Thanks Lenny...........
Tunokies Posted July 10, 2016 Posted July 10, 2016 You're not the chap who's selling a timegrapher together with a SNZG15 in Beckenham are you? All you need to do is check out the photo attached. Start small, buy a couple of cheap used seiko 5's, de-case them, swap the dials and hands and see how you go.
jdm Posted July 10, 2016 Posted July 10, 2016 27 minutes ago, Lenny said: anyways as I was moving the beat lever the hairspring stopped . I removed the spring , wheel and cock and the spring was a mess. Seiko hairspring are very (insert "very: 5 more times here) delicate. If it is still within repair your best chance is to bring it to a watchmaker to be corrected, otherwise a new balance complete will be needed (out of stock at Cousins at this time). I understand that you are serious having even bought an expensive tool (actually a smartphone app would have been pretty much OK), but to be honest with you I strongly recommend that you practice first with junk movements before moving to the watches that you want to wear or have any value. 3
Lenny Posted July 10, 2016 Author Posted July 10, 2016 What I'm asking is do the ends of the regulator levers have to be rotated to be able to regulate without pulling the spring ..I've been doing it awhile and its been ok ..
Lenny Posted July 10, 2016 Author Posted July 10, 2016 Thanks Tunokies , So the spring glides through a slot at the arm and is fixed to the stud arm ..I thought maybe it got stuck to the arm ...
Lenny Posted July 10, 2016 Author Posted July 10, 2016 I know what I got to do , order a new hairspring balance and try and install it to the cock ... I got to buy an electron microscope now ....Yea I'm the guy in Beckenham ...if I don't sell it quick im gonna have a go ..
Tunokies Posted July 10, 2016 Posted July 10, 2016 An electron microscope.....wow. To do watch repairs? 1 1
tagawa Posted July 11, 2016 Posted July 11, 2016 In this thread, Steven has a good suggestion for regulating a 7S26/7S36. I've given it a try and while not perfect it's a good start, especially if you have a timegrapher for fine tuning - I don't yet :-(
Lenny Posted July 11, 2016 Author Posted July 11, 2016 In this picture it looks like the regulator pin might snag the hairspring when moving the reg arm , is this just a locked gate and the hairspring rides inside so you can regulate without pulling or deforming the HS..... ??
Lenny Posted July 11, 2016 Author Posted July 11, 2016 13 hours ago, Tunokies said: An electron microscope.....wow. To do watch repairs? I am struggling with a 4x loupe , I'm getting on a bit and my eyes aren't what they used to be ..This would be just the ticket https://www.cousinsuk.com/product/benchtop-digital?code=M39115
jdm Posted July 11, 2016 Posted July 11, 2016 4 hours ago, Lenny said: In this picture it looks like the regulator pin might snag the hairspring when moving the reg arm , is this just a locked gate and the hairspring rides inside so you can regulate without pulling or deforming the HS..... ?? Good picture. No snagging unless you exaggerate rotating. For a beginner it's better to leave it. Discussion: 1
Lenny Posted July 11, 2016 Author Posted July 11, 2016 (edited) Thanks jdm,, This is the page that picture is from and this guy turned the pin horizontal before he regulated so that is why I was wondering about this ... http://www.thewatchsite.com/21-japanese-watch-discussion-forum/163882-weishi-1000-timegrapher-calibrating-my-seiko-watches-lot-photos.html Edited July 11, 2016 by Lenny
Lenny Posted July 12, 2016 Author Posted July 12, 2016 Well I sold the timegrapher and am bowing out of this hobby , I should have persevered . I could of bought another movement from cousins and swapped it over or try to transplant the balance assembly .. But it's gone now ..At least I know how mechanical watches work ......lol............... 1
Lenny Posted August 14, 2016 Author Posted August 14, 2016 (edited) I bought another watch and Timegrapher ,, I regulated the Parnis power reserve and landed on a magic spot , it's running like a Quartz... I can't beleive it ... ..makes it all worth it ..It helps that it hacks so having the balance wheel stopped is a lot less distracting for newbies..When the Seiko stopped I was pushing the beat lever so I think the balance jewel ended up on the wrong side ,, the wheel stopped dead and wouldn't move ..I didn't realize a bit of beat error is acceptable ... Edited August 14, 2016 by Lenny 1
jdm Posted August 14, 2016 Posted August 14, 2016 Welcome back to the hobby. Take things patiently and rationally and you'll have lot of satisfactions. 2
Lenny Posted August 14, 2016 Author Posted August 14, 2016 1 hour ago, Tunokies said: Dude, you're back
Recommended Posts