Jump to content

Radium dial? Helva super compressor watch.

rogart63
 Share

Recommended Posts

rogart63 Distinguished Member

rogart63

Posted
Posted

I am wondering what you think about this dial? Do you think it looks like a radium dial? On the bottom of the dial it says RA swiss made RA . The watch is from 1969 we think? Sorry for the bad pictures? 

SGTJ556 (1).jpgJxK0Bj1.jpg

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
  • Author
Posted
6 minutes ago, vinn3 said:

if you are worried about radiation,  and  i does not  glow in the dark;  pass a geiger counter over it.  vinn

If i only had one? Anyone tested the geiger smart phone counters on Ebay or Amazon? Are they any good? 

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
  • Author
Posted

i

49 minutes ago, rodabod said:

What is the text a the bottom of the dial?

It says RA swiss dial RA . That 's  why we think it's radium dial? But it's strange if the watch is from `69 why radium? It was banned `68. Maybe the only option is to get a geiger test? 

Link to comment
Share on other sites
szbalogh Super WRT Addict

szbalogh

Posted
Posted

Just put it in the drawer for 2 days and get it out in the dark. If still bright, then it has some radioactive compound. 

If its brightness fades in the dark quickly then it is zinc-sulfide based, if still readable after one day in the dark, then it is amybe strontium-aluminate based. 

Ra on the dial however is indicating Radium. It is fading to 50% in about 1600 years, so it should be as bright as it was 50 years ago. 

By the way, one super compressor is my dream. I am jealous ;)

 

  • Like 1
Link to comment
Share on other sites
vinn3 Distinguished Member

vinn3

Posted
Posted

tridium is rather new.   radium on dials goes back  many years.  my counter was  sold as  military  surplus.  my german aircraft clock,  from 1040  will  set off the alarm.  so,  even though it does not glow in the dark  it's still  hot.  vinn

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
  • Author
Posted (edited)
On 7/4/2016 at 0:14 PM, szbalogh said:

Just put it in the drawer for 2 days and get it out in the dark. If still bright, then it has some radioactive compound. 

If its brightness fades in the dark quickly then it is zinc-sulfide based, if still readable after one day in the dark, then it is amybe strontium-aluminate based. 

Ra on the dial however is indicating Radium. It is fading to 50% in about 1600 years, so it should be as bright as it was 50 years ago. 

By the way, one super compressor is my dream. I am jealous ;)

 

Me to :)  This is not my watch but I will have to work on it so it's me i am thinking about? Always nice to own a supercompressor nevertheless ? 

What movement could it be? AS 1568? 

Edited by rogart63
Link to comment
Share on other sites
rodabod Distinguished Member

rodabod

Posted
Posted
On 7/4/2016 at 0:14 PM, szbalogh said:

.... indicating Radium. It is fading to 50% in about 1600 years, so it should be as bright as it was 50 years ago. 

I have never seen this to be the case as the sulfide mix (or whichever substrate is used for the Radium to excite) usually deteriorates to the point where the watch no longer glows at all, despite still being radioactive.

Link to comment
Share on other sites
rodabod Distinguished Member

rodabod

Posted
Posted

Having looked elsewhere, as I guess the original poster probably has already, it certainly seems as if "Swiss RA" does suggest Radium. It may have been re-lumed with Tritium later though, so still worth checking.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • rehajm
      Second hand watch market.

      By rehajm · Posted

      I’ll take a counterpoint on the youngsters- all the under 30s in my extended family are into fashion and trends and have varying jobs/careers where the only common denominator is they provide the disposable income to buy watches, sometimes expensive ones. Most are very excited about my ‘new hobby’ and I’m spoiling them on their birthdays this year with a rescue- the weems already went out but here’s the rest… …I’ll share in the guilt of inflating prices for the stuff what once could be had for a few quid. Except for the 404 a good thing I say…
    • Terrinecold
      First movement = First broken movement

      By Terrinecold · Posted

      @LittleWatchShop thank you for the advice.  @Neverenoughwatches here are all the angles I could think of. If some are missing I can take more. Sorry for the quality they are taken through a phone.  @Neverenoughwatches here are all the angles I could think of. If some are missing I can take more. Sorry for the quality they are taken through a phone.   Note that after I was so happy to see it oscillate I screwed the cock and it stopped. I have been trying to make it restart since
    • LittleWatchShop
      First movement = First broken movement

      By LittleWatchShop · Posted

      To get the fork to engage the roller jewel, preset the fork toward the center of the movement.  Then as you are bringing the balance to the movement rotate it 90 degrees CW w/r to its final position.  Then as you drop the balance in, rotate the cock CCW toward the final position. Let the cock rest in the final position as you gently adjust the balance into position.  With power on the train, the balance will engage with the fork and start to oscillate.  That tells you that you have the bottom pivot in place.  Then while holding the cock with a piece of pegwood, adjust the balance until the upper pivot falls in place. This is my method.  I am sure I did not come up with it...saw some video some years back.  Perhaps one of Mark's
    • Neverenoughwatches
      First movement = First broken movement

      By Neverenoughwatches · Posted

      Best way to determine if there is an issue with the first balance assembly to take a few pictures of it from a few different angles and post them here. As a beginner it can be difficult to figure out if something is broken or not, you need to know what something in good working order should look like first .
    • Terrinecold
      First movement = First broken movement

      By Terrinecold · Posted

      Thanks to this video I undid the tangle.  The spring is still out of round and the watch is still not starting when I put the balance in place.  Since now I have a second movement, I’ll try swapping the balances to confirm that is the issue The result is not very conclusive. Swapping the balance didn’t make the first movement work. BUT, when putting the good balance back in the good movement I had a hard enough time doing it (it did work in the end but I think my problem is managing to sit the balance pivot in its bottom jewel or to fit the impulse jewel into the fork) that I keep wondering if the failure in the case of the old movement is because I broke it or because I am not good enough at reinstalling balances.  I confirm that the main issue is between the seat and the tweezers.  after more effort the first movement with its own bal and ou of shape spring started.  No doubt the time keeping will not be good but IT’S ALIVE!   
×
×
  • Create New...