Jump to content

My Latest Project Watch Has Arrived.

Geo
 Share

Recommended Posts

Geo Distinguished Member

Geo

Posted
Posted (edited)

I've just bought a Seiko chronograph that requires a few things to get it up and running. I will strip the movement and give it a good clean and lube to see if I can get it firing on all cylinders. A new stem is required, but unfortunately they seem in the same storage location as hens teeth; the hunt is on!

post-124-0-20432800-1399984199_thumb.jpg

post-124-0-97208600-1399984213_thumb.jpg

post-124-0-90609500-1399984229.jpg

Edited by Geo
  • Like 1
Link to comment
Share on other sites
autowind Distinguished Member

autowind

Posted
Posted

I always wanted one when they were ultra cool back in 1970 something or other,  but the usual story,  never had sufficient funds,  Now I can have one the need is not so pressing.  That looks like a nice example and they still look cool,  whatever cool means.

 

There are a couple of videos on YouTube about the winding system, in case you are not aware of them,  if you search for seiko magic lever system,  it should find them.

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
  • Author
Posted

Thanks for your comments Roger, like you I fancied one back then. I remember wandering through the Spanish resorts with shops full of the things.

Regarding the autowind mechanism, I have serviced a couple of non-chronograph Seikos, so that bit won't be an issue. It's the chrono I want to get my teeth into because it is different from the ones I have been working on.

An interesting aside, I just found out that this was the first type of automatic chronograph in space!

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
  • Author
Posted

Try schillachi61 on fleabay, good bloke who stocks lots of Seiko parts. He has a stem listed on fleabay Ireland but not on the UK site as far as I can see. Definitely worth contacting.

Many thanks for the heads up, I really appreciate it. I'll check it out tonight.

Link to comment
Share on other sites
  • 2 weeks later...
Geo Distinguished Member

Geo

Posted
  • Author
Posted

A wee update.

I've had to get a few bits for this one; Crown, stem, balance assembly, movement retaining ring, pusher seals and springs, back gasket and bracelet.

I managed to get a new crown and stem, but I could not get one with the gear for turning the inboard bezel. Hopefully I'll pick one up in the future. When I fitted these I discovered a problem with the quickset day and date mechanism. It turned out to be an easy fix, it was diagnosing the problem that was the tricky bit. It turned out to be a distorted leaf spring, so a simple tweet with pliers sorted it.

Having sorted that, I took a look at the now running balance assembly and discovered that someone had glued the end of the spring into the cock. I've managed to buy a good second hand one for £6.00 so I'm well pleased.

Update to come!

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
  • Author
Posted

Balance assembly arrived today. I've tried it in the watch and it's running 12 secs fast with a beat error of 2.3ms. I'm well chuffed with that because I still have to service the movement and make adjustments.

Well I've had to order a second crown..........damn! I dropped the one I just bought and it has evaporated, even on my white carpet. What amazes me is it the first thing that I have not been able to find, and I've lost and found parts that are so small they would hardly irritate you eye if it popped in. A new one has been ordered, so you can guarantee the original will turn up now.

Link to comment
Share on other sites
  • 3 weeks later...
dailyticker Member

dailyticker

Posted
Posted

Thumbs up on your project!

 

Just sharing...

 

Seiko 6139 aka "Pogue" 

Seiko's calibre 6139, also introduced in 1969 displayed a combination of column wheel and vertical clutch. The clutch, the vertical variety is the chronograph component that guarantees the chronograph second hand does not flutter when activated. It prevents wear on the column wheel and ensures accuracy by aiding in maintaining balance amplitude. The really innovative thing about the Seiko calibre is a proprietary innovation: a 3-pronged hammer component called the magic lever that efficiently saves room and components. According to seiko it also allows all three chronographs hands to be reset in perfect unison

 

post-235-0-23439800-1402492607_thumb.jpg

Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
  • Author
Posted

Thumbs up on your project

Thank you for that and welcome to the forum Jay.

I've been holding up completion of this project because I require the correct stem and gear assembly. If I don't find one soon, I'll have to compromise and build it without the inner bezel being capable of rotating. :-(

Link to comment
Share on other sites
dailyticker Member

dailyticker

Posted
Posted

Thank you for that and welcome to the forum Jay.

I've been holding up completion of this project because I require the correct stem and gear assembly. If I don't find one soon, I'll have to compromise and build it without the inner bezel being capable of rotating. :-(

Where do you normally source your parts from?

Link to comment
Share on other sites
  • 2 weeks later...
Geo Distinguished Member

Geo

Posted
  • Author
Posted

Hi Bob, the movement is a 6139B and the watch is designated Seiko 6139-6002. It would be great if you could help. :-)

I'm in currently renovating my kitchen, so it will be a while before I get back to watch projects. :-(

Link to comment
Share on other sites
  • 2 months later...
Geo Distinguished Member

Geo

Posted
  • Author
Posted

7629d3ae-b28c-4060-a30c-bf6e58a963b1.jpg

Finished at last. It required a lot more than I originally thought.

1) Stem with spring, bezel gear and crown. Many thanks to Roger "Autowind" for supplying this.

2) Pusher springs. The springs were missing.

3) Balance assembly and bridge. The stud was broken off the hairspring making timing impossible.

4) Delecate repair to bezel teeth. Damaged at some pint due to stem gear not engaging properly.

5) Required movement retaining ring and spring. It had been abused at some time and was cracked.

6) Replaced minute counter hand. A replacement had been fitted but was the wrong shape.

7) Replaced and lubricated all seals.

8) Totaly re-finished case.

9) Fitted new replacement strap.

10 Enjoying wearing it!

There is slight abrasion to the coloured outer bezel, I may replace it at a later date.

  • Like 2
Link to comment
Share on other sites
noirrac1j Distinguished Member

noirrac1j

Posted
Posted

Now that is a great watch!  I am scared to try servicing a chronograph for fear that it will end up as a pile of plates, screws, levers and wheels. Seems like you already ahead of the game if a new balance got it running...even if its fast, the overhaul should remedy that! Please post a step by step with photos when you get around to the disassembly so that I can get a sense of whether it is within my skill set? Thanks Geo!!

 

JC

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Without Our Forum

      By Neverenoughwatches · Posted

      Ok so there is barely any response happening . After this last attempt i think I'm just going to give up on it because very few seem genuinely interested or even bothered or worried what may happen in the future. ( if someone can set me straight I'd love to hear it ) I would think anyone into watches has heard of Roland Ranfft, how they grew to love and depend upon his site for detailed information. And not just that, he also had a view about Ebay and everyone that visited Roland's site knew exactly what he thought about Ebay, Roland's site also had a secondhand watch sale side to it.  If anyone here could have done anything to preserve his site and keep it exactly the way it was.........Would you have done something to make that happen ?  Its been pointed out to me but not in so many words  that I'm probably coming across as an insensitive p.rick, truly I'm sorry about that, i say it as it is but no malice is intended and yes clearly I'm putting my forum membership on line here. I'll happily shut up about it now .
    • grenert
      A see-through vintage Swatch! Service walkthrough of a ETA 2842 with Video

      By grenert · Posted

      Thank you so much for posting this!  Although this movement is serviceable, there are no service notes that I've been able to find.  This is a great alternative!
    • rjenkinsgb
      Learning Watch repair maintenance

      By rjenkinsgb · Posted

      Greetings from another electronics designer & programmer!   I suggest you get a batch of similar scrap movements from ebay - I found batches of Seikos very cheaply, I got seven of one type for £11 (or 11 Euros possibly?). Those were ladies, 4206B I believe. There are also mens movements at a slightly higher price; eg. https://www.ebay.co.uk/itm/134723051997 https://www.ebay.co.uk/itm/235565276549 They are cheap enough so it does not matter what gets messed up or lost & you can probably still get one or two working movements from a batch, even if some part are damaged when you get them. (I've had quite a bit from the guy in Holland, he usually has a good range of movements).  
    • Neverenoughwatches
      Favourite timepiece.

      By Neverenoughwatches · Posted

      Please OH, we should all be proud of our collections what ever they are. If we can't show them off here then we can't show them anywhere. Our favourite gives us a story to tell of why we love it, that story also tells others something about ourselves. These are some of the things that make our forum and our community so amazing .
    • Terrinecold
      First movement = First broken movement

      By Terrinecold · Posted

      I can take pictures when I am home of what it looks like.  They will be phone picture as I don't have a camera in my microscope yet but I should be able to take a few views to give a good idea of the damage.
×
×
  • Create New...