Jump to content

E. Howard Wristwatch


DJW

Recommended Posts

I wanted to find a Hunter Case movement so that I could use the original dial and not have to get it refinished to match the new layout of a wristwatch conversion. I was lucky enough to find this Hunter case E. Howard 12s movement with a pristine dial. Amazing that the movement, dial and hands are all over 100 years old! The movement also has a "Safety Barrel" meaning that if the mainspring ever breaks, it will not damage the train wheels with the sudden recoil of the spring barrel. Case is 46mm without the crown, but really does not feel that large on the wrist.

 

post-90-0-71280100-1398443919_thumb.jpg

 

post-90-0-93704800-1398443920_thumb.jpg

 

post-90-0-11209800-1398443922_thumb.jpg

Edited by DJW
Link to comment
Share on other sites

Nice - Howard made good movements - and yours is in fine fettle!

Thanks Will!

I try and build stuff that I like, but will be appreciated by others as well. And, There is just something about these vintage movements that I find intoxicating!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • No idea Rich, but for your own sake please avoid inhaling the fumes.
    • I would try the vapour treatment very simple just a simmering pot of the stuff and jewels bluetacked ( not whitetacked this time, you still haven't said if I'm forgiven yet 🙂 ) to the underside of the lid. You're now gonna tell me that stearic acid can be highly explosive above 90° C 🤣
    • I guess it also depends on the precision and quality of the watch. He works on vintage watches mainly and surface treatments on 50 - 60 year old watches probably isn't going to make much difference. I read about nano coatings for car finishes. The article claims that nano coatings can reduced the coefficient of drag by 5%. Is that number significant? I don't know. Maybe if you were trying to break the land speed record. But applying that on a 50 year old clunker isn't going to make it go any faster, accelerate better or save on petrol. 🤣
    • 😅 yep certainly overdid it , i wasn't sure if i had enough heat so i went out and left it cooking. You can see the thick frosting, bit like my cherry buns.
    • 5 hours! You have slow cooked it! It must be really tender by now. @nickelsilver posted about his Greiner machine a while back. It had a heated chamber of stearic acid to epilame jewels and it only took 60 seconds. I've tried stearic acid dissolved in ethanol with a flake of shellac. I'm not really convinced by my test results. I conducted a side by side test by coating a mirror with a stripe of stearic acid and putting several drops of 9010 on the treated surface and untreated surface and observed it for several days. The 9010 spread out about the same for both the treated and untreated surfaces. I spoke with my mentor recently regarding epilame and lubricating pallet jewels. He has stopped doing both because he finds no significant improvements to the end result.
×
×
  • Create New...