Best Oilpots?

[rogart63]

Need a new oil pot for 9010 oil . Prefer a small crater. Any tips on a good one?  The plastic i have now isn't any good? 

[bobm12]

An individual Bergeon 6885-R. It is the red one and the smaller they have. Those are also stackable...and pricey!

[Spandrel]

 use a selection of these. They err ... hold oil and have lids. Anything else needed?

 

https://www.cousinsuk.com/product/oil-pots-single-cups-indian

[rogart63]

 use a selection of these. They err ... hold oil and have lids. Anything else needed?

 

https://www.cousinsuk.com/product/oil-pots-single-cups-indian

Have a black but has outgrown it? Think the plastic are to soft and looking for something better . A Bergeon is'nt a bad idea? There aren't that many others to chose from? 

[Cougarnaut]

Hi,

 

Once I made myself a prototype for 3D printing with openSCAD. As pot I used some old 12 mm glasses.

 

[rogart63]

Hi,

 

Once I made myself a prototype for 3D printing with openSCAD. As pot I used some old 12 mm glasses.

 

Where do i send the order?  :D

[bobm12]

That's cool,

 

How can I get the file to print the pots?

 

Cheers,

 

Bob

[Cougarnaut]

http://dirkfassbender.de/oil-cup-stand.html

[bobm12]

Thanks Dirk!   :thumbsu:

[oldhippy]

This is the type of oil pot I used, I had three. I found this one on ebay but its expensive.

[jdm]

If you want to place order and some style on the desk buy the ones that organize oils and oilers. Otherwise pretty much anything works.

[Folkvisor]

That's cool,

 

How can I get the file to print the pots?

 

Cheers,

 

Bob

All you need now is a 3D printer! Dave 

[bobm12]

No sweat Dave, I have one! :)

[Folkvisor]

Can you print a red 63 Corvette Stingray? Red would be nice but any colour will do.

 

Thank you.

 

Dave

 

PS - can you print 2? I'll use one for parts.

[bobm12]

I could but it would be too small to drive. Are you into model making? :D

[Folkvisor]

I used to be into making model cars but I ran out of space. Watches are smaller. ;-)

 

Dave