Jump to content

Recommended Posts

Posted

Shot for Channel 4 in 1991, The Watchmaker, is a 10 minute documentary which glances at the life of Clifford Norman Bowler (1899-1993) a long-standing English watchmaker and definitely someone many of us would have liked to meet.

 

post-1450-0-99328100-1448830147_thumb.jp

 

Mr. Bowler belonged to the precise profession for over 70 years until his death at 93. Initially working for others in Manchester after he left the army, he set up his own repair shop at 54 Mill Lane, West Hamsptead, which he acquired for 100 pounds and run for over 67 years. Today there is a plate commemorating him at the entrance of his former premises.

 
post-1450-0-87196900-1448823211_thumb.jp
 
In the film he can be seen at his work bench smoking a pipe or inspecting watches with an eye loupe and at the counter taking several orders from customers (cleaning a pocket watch, changing a strap or a pin). He recounts for the camera his beginnings and how he moved to London, as well as remembering relatives. When asked about the secret of his longevity, he confesses this to owe to a contented mind, regular habits and a peaceful life.

 

Sadly he did not leave any followers: 'All the knowledge that I have obtained and learned during over sixty years that I have been here, it all comes to nothing. I can't pass my knowledge on which I'd like to'.

 

His shop, still vacant more than a decade later after his disappearance, symbolises the emptiness left by an irreplaceable man.

 

There is more info about him in this article: http://westhampsteadlife.com/2014/01/15/a-moment-in-time-on-mill-lane/9921

 

If you ever met this man or heard about him, your comments could help to honour his memory.

  • Like 3
Posted

Shot for Channel 4 in 1991, The Watchmaker, is a 10 minute documentary which glances at the life of Clifford Norman Bowler (1899-1993) a long-standing English watchmaker and definitely someone many of us would have liked to meet.

 

attachicon.gifClifford Bowler.jpg

 

Mr. Bowler belonged to the precise profession for over 70 years until his death at 93. Initially working for others in Manchester after he left the army, he set up his own repair shop at 54 Mill Lane, West Hamsptead, which he acquired for 100 pounds and run for over 67 years. Today there is a plate commemorating him at the entrance of his former premises.

 

attachicon.gifmill_lane_watchmaker_plaque.jpg

 

In the film he can be seen at his work bench smoking a pipe or inspecting watches with an eye loupe and at the counter taking several orders from customers (cleaning a pocket watch, changing a strap or a pin). He recounts for the camera his beginnings and how he moved to London, as well as remembering relatives. When asked about the secret of his longevity, he confesses this to owe to a contented mind, regular habits and a peaceful life.

 

Sadly he did not leave any followers: 'All the knowledge that I have obtained and learned during over sixty years that I have been here, it all comes to nothing. I can't pass my knowledge on which I'd like to'.

 

His shop, still vacant more than a decade later after his disappearance, symbolises the emptiness left by an irreplaceable man.

 

There is more info about him in this article: http://westhampsteadlife.com/2014/01/15/a-moment-in-time-on-mill-lane/9921

 

If you ever met this man or heard about him, your comments could help to honour his memory.

Great vid. He must have accumulated a vast amount of knowledge with 60 years of watch/clock repair. Working with no finger cots & smoking  a pipe while he worked amazing.

Posted

fascinating video. all of that knowledge and experience - gone. i wish i had it to do over again. i would like to have been an apprentice in a situation like that. he seemed a lovely old chap.

Posted

Great post Edmund, and loved the video. Brings back memories of an almost identical shop when I was a kid in Ireland. Bit sad when he talked about the loss of knowledge. Really makes you appreciate what Mark does in his videos, as this is my only form of any training, the rest is trial and error.

  • 4 years later...
Posted

Reading the Wikipedia-page of actor Norman Bowler, he seems to have honoured his father 'after all',  by naming his dad's trade and former location in his article.

Best regards,

FdH

 

 

 

  • 2 years later...
Posted
On 11/29/2015 at 9:10 PM, Edmund said:

Shot for Channel 4 in 1991, The Watchmaker, is a 10 minute documentary which glances at the life of Clifford Norman Bowler (1899-1993) a long-standing English watchmaker and definitely someone many of us would have liked to meet.

 

post-1450-0-99328100-1448830147_thumb.jp

 

Mr. Bowler belonged to the precise profession for over 70 years until his death at 93. Initially working for others in Manchester after he left the army, he set up his own repair shop at 54 Mill Lane, West Hamsptead, which he acquired for 100 pounds and run for over 67 years. Today there is a plate commemorating him at the entrance of his former premises.

 
post-1450-0-87196900-1448823211_thumb.jp
 
In the film he can be seen at his work bench smoking a pipe or inspecting watches with an eye loupe and at the counter taking several orders from customers (cleaning a pocket watch, changing a strap or a pin). He recounts for the camera his beginnings and how he moved to London, as well as remembering relatives. When asked about the secret of his longevity, he confesses this to owe to a contented mind, regular habits and a peaceful life.

 

Sadly he did not leave any followers: 'All the knowledge that I have obtained and learned during over sixty years that I have been here, it all comes to nothing. I can't pass my knowledge on which I'd like to'.

 

His shop, still vacant more than a decade later after his disappearance, symbolises the emptiness left by an irreplaceable man.

 

There is more info about him in this article: http://westhampsteadlife.com/2014/01/15/a-moment-in-time-on-mill-lane/9921

 

If you ever met this man or heard about him, your comments could help to honour his memory.

My girlfriend just bought this properly! We are currently ripping out the interior to refurbish it but the plaque in the picture above is staying. 🤓

  • Like 1

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • @oldhippy, hasn't been on since the 14th of April, I messaged him nine days ago, no reply.  I  hope he's on an around the world trip with endless booze and supermodels.   joking apart, I  hope he's alright. Does anyone know anything? 
    • Some of the older American companies did at least claim to manufacture them so reliably that any one of their tailstocks should perfectly center any one of their headstocks. But it would take probably someone like nickelsilver to verify that in a big enough collection.
    • You also have another potential issue with head and tail stocks, in my research it would seem that for the American style lathes the head and tail stocks were bored as a pair. So a matched pair is good a “pair “ made up from two different lathes cause some headaches. The Swiss Geneva style lathes are much lighter but were apparently made to fit any lathe. I have seen mention of being able to shim the tailstock as well to true up. indexing is again not so straightforward for a watchmaker lathe, at least not as I have found so far. Often a lathe will come with basic indexing which is limited to 60 positions. The full index plates do come up at times for eywatering prices. It is very possible to do that electronically. As well as what @SwissSeiko maybe able to point you to have a look here. https://imakewatches.com/projects/CNCIndexDriver.html   https://imakewatches.com/projects/MillingAttachment.html   Tom
    • On a watch repair discussion group that you know that we love to see naked watches out of the case you show us a box? I think a book on watchmakers lathes should be helpful.   The watchmakers' lathe, its use and abuse; a story of the lathe in its various forms, past and present, its construction and proper uses by     Goodrich, Ward L https://archive.org/details/watchmakerslathe00good  
    • Got it. So a WW lathe will have that graduated drive pulley for different speeds and similar setup for the bed and tailstock, but they won't be fully compatible with one another in terms of parts. Thanks! The picture helps a lot.
×
×
  • Create New...