Jump to content

Ball RR grade PW complete

arron
 Share

Recommended Posts

arron WRT Addict

arron

Posted
Posted

Hi Guys,

Today I have a huge sense of accomplishment and relief after finally finishing restoration of this Ball 999B 16s 21 j railroad grade pocket watch.  I started it in April, so it only took me five months to complete; as life got in the way.  It also had a lot wrong with it.  Broken jewels, broken staff, bent wheel, broken hands, well, you get the picture.  It's running great in my estimation.  The fact that it's running at all is proof, not of my workmanship because heaven knows it's lacking, but of the high quality of workmanship that went into the watch's manufacture.  I feel very lucky to have gotten it back into shape.  My only regret is that you can see some of the glue used to adhere the crystal.  I thought it was supposed to dry clear.  I might retry with some UV glue to see if that's better.  Thanks to all the people who gave me input along the way.  I couldn't have finished without all their help.  Arron.

ball pw.jpg

  • Like 9
VWatchie Distinguished Member

VWatchie

Posted
Posted (edited)
1 hour ago, arron said:

My only regret is that you can see some of the glue used to adhere the crystal.  I thought it was supposed to dry clear.  I might retry with some UV glue to see if that's better.

Congrats on a job well done! 👍 It's a very nice watch!

I UV-glued (Sternkreuz) my first crystal a couple of weeks ago and was very satisfied with the result.

 

25 minutes ago, mbwatch said:

We only get ONE photo?

I agree we need more photos. We always need more photos! 😆

Edited by VWatchie
rehajm Super WRT Addict

rehajm

Posted
Posted
5 hours ago, arron said:

  My only regret is that you can see some of the glue used to adhere the crystal.  I thought it was supposed to dry clear.

Well it is difficult to see from the picture. Maybe by the nine? I see lots of glue exposed put there by professionals so consider yourself advanced 😀

  • Like 1
mbwatch Super WRT Addict

mbwatch

Posted
Posted

I always need more pocket watch stands temporarily than I have on hand or can get to the university lab to print more, and Lego never occurred to me. I have that in great abundance.

arron WRT Addict

arron

Posted
  • Author
Posted

Here's a pic of the movement.  It had significant rust and corrosion on the winding and ratchet wheels and balance cock and screws.  I used a buff with green compound on a dremel to remove the corrosion (i can see in the picture i missed at least one screw).  It's not perfect but still looks vintage and a lot better than it did.  I told my son today that unless he makes me really mad, it'll be his in the future.

My sons have made me lots of accessories for my fountain pen collection out of legos.  I've repurposed some for watches and for holders for my iphone.  They work great.

I'm going to check out the resource listed by @VWatchie listed above so I can get better at crystal replacement.

Thanks to everyone for their encouragement.  You need that sometimes in this hobby, because at times it can be very humbling.  🙂 

ball mvt.jpg

  • Like 4
VWatchie Distinguished Member

VWatchie

Posted
Posted
17 hours ago, RichardHarris123 said:

Even the professionals on here are humbled at times.  Very few never require help. 

17 hours ago, arron said:

Thanks to everyone for their encouragement.  You need that sometimes in this hobby, because at times it can be very humbling.  🙂

Yes, we need each other's support because there are days when you can feel very down and start thinking about giving up. It's easy to feel inadequate when you see the pros on YouTube, but then you have to remember that there is a lot of editing. A step that might take an hour, two, or even three in real life is often done in a few seconds in a video.

  • Like 4

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Nucejoe
      Greetings from Whidbey Island.

      By Nucejoe · Posted

      Hello and welcome to the WRT forum.
    • JohnR725
      A lathe with indexing that won't break the bank?

      By JohnR725 · Posted

      interesting video nice to see the machine what it can do now I wonder what it costs and I'm sure it's not in my budget. Plus the video brought up questions but the website below answers the questions? What was bothering me was the size of his machine 4 mm because I thought it was bigger than that? But then it occurred to me that maybe they had variations it looks like four, seven and 10. With the seven and 10 being the best because way more tool positions in way more rotating tools. Although I bet you all the rotating tools are probably separate cost https://www.tornos.com/en/content/swissnano   Then as we been talking about Sherline. Just so that everyone's aware of this they have another division their industrial division where you can buy bits and pieces. I have a link below that shows that just in case you don't want to have the entire machine you just need bits and pieces. https://www.sherline.com/product-category/industrial-products-division/   Let's see what we can do with the concept I explained up above and bits and pieces. For one thing you can make a really tiny gear very tiny like perhaps you're going to make a watch. Then another version the center part is not separate it is all machined from one piece. Then fills gear cutting machines have gone through multiple of evolutions. A lot of it based on what he wanted to make like he was going to make a watch unfortunately eyesight issues have prevented that. Another reason why you should start projects like this much sooner when your eyesight is really good or perhaps start on watches first and then move the clocks then local we have from the industrial division? Looks like two separate motors and heads. Then it's hard to see but this entire thing is built on top of a much larger milling machine as a larger milling machine gave a very solid platform to build everything.   Then like everything else that had multiple generations are versions the indexing went through of course variations like above is one version and the one below was the last version. Now the version below I mentioned that previously and somewhere in the beginning to discussion and somebody else had one in their picture. As it is a really nice precision indexing. Then I wasn't sure if I had a the watch photos here is his unfinished watch. No he wasn't going to make a simple watch like none of his clocks were simply either what would be the challenge and that.    
    • Titanium
      Lab Coats

      By Titanium · Posted

      Use a Portwest Howie lab coat. They are the biological type so they have tapped cuffs so you don't end up getting the loose cuffs of normal lab coats catching everything. 
    • Titanium
      Chinese tools debate

      By Titanium · Posted

      Some of the Chinese tools ae great and can be purchased at a fraction of the price of Swiss ones, some are complete garbage and some I'm convinced are coming out the same factory as the branded ones.
    • caseback
      Calendar work certina 25-651

      By caseback · Posted

      I found this string about this problem. I've not gone through it all, but I believe it also mentions making a spring. If not in this string, the info is online.
×
×
  • Create New...