Jump to content

Survey Of The Swiss Watch Industry


Recommended Posts

I sincerely hope that I am not violating any forum rules here but I think that this as a worthy cause that most people here will be interested in.

 

It is of course in connection with the impending cessation of supply of parts to the independent trade by the Swatch Group.

 

A well regarded independent repairer who regularly blogs his exploits is conducting a survey into peoples experience with both independent repairers and authorised service centres with a view to submitting the results to the Federation of the Swiss Watch Industry in Biel.

 

If anyone is interested in taking part the link to the survey and some background information can be found here

 

http://watchguy.co.uk/watchguy-survey-swiss-watch-industry/#more-10903

 

I hope that by posting this link I haven't broken any rules.

Moderator please remove this post and accept my apology if I have transgressed.

 

 

Link to comment
Share on other sites

I don't think the boss will have an issue with this, as his livelihood will be affected with this nonsense Swatch are initiating.

I've already filled in the survey via another forum. The initial results statistically make interesting reading.

Link to comment
Share on other sites

I have written a lot on this subject in this forum. I have also written to my local MP & to our present industry secretary sadly to no effect. This survey is interesting & proves our argument but it will have no benefit to the cause. 

The problem is traditionally the horology has been very insular & if you look at the arguments being put forward they are still being put forward within the industry. The customer & future customers are is still not aware of their fate.

Sadly as a result Swatch feel no pressure to reconsider & will go ahead as they have planed.

Link to comment
Share on other sites

I don't think a survey will help matters with the supply of parts, but I have filled in the survey it took all of 10 minutes. The only thing that would change the mind of the Swiss watch industry would be if revenues are affected by such decisions.

 

The prices of Swiss watches has been outstripping inflation for the past ten years now, Rolex, Omega and many other manufactures have increased prices beyond the reach of many does this make sense? Rolex manufacture around 600,000 watches a year my guess is they are trying to produce less with out losing revenue if they sell 600,00 watches at a average of £3,000 a watch it makes more sense to sell 300,000 at an average of £6,000 a watch and limit supply and increase the image of exclusivity and maintain the brand image. The industry also seems to want to push independent jewellers out of the supply chain and more brands are moving toward boutique stores and forcing independent stores into expensive refits, if they cant afford it then they lose there franchise.

 

I have had many bad experiences with manufacturer service centres, Omega and Jaeger Lecoultre have both been appalling in the past, they offer poor value extremely long turn around times and are generally expensive. Simple jobs will become expensive. In the past year I have been told by one manufacturer when enquiring about a simple crystal replacement that it could only be done as part of a full service going from what should have cost £50.00 pounds at the most to £400.00 including compulsory service in the end a independent fitted one for £35.00. I have also been told that a steel bracelet I had on my Omega Speedmaster could not be repaired and would need to be replaced at a cost of over £400.00 pounds, The same strap was repaired by a independent repairer for £20.00.

 

I hope that things like this will make the general public think twice before purchasing a Swiss watch from the big manufacturers, because practises like this will be the norm in the future and hopefully the big manufacturers will suffer from there own sharp practice there are plenty of good watches to be had from smaller manufactures and the gap would hopefully be filled by these.

 

At the end of the day it is simply a revenue increasing exercise these manufactures are more interested in selling new watches than ensuring your inherited watch your father wore continues to run.

  • Like 2
Link to comment
Share on other sites

  • 2 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • So that is what the last person to work on this movement appears to have done.  There was a "wad" of adhesive material in the vicinity of that hole when I took the dial off.  I was hoping to take the high road and fix the issue in the work I did on this movement. I wasn't sure if I was imagining things or not when I looked at the screw hole, but it does appear to be somewhat distended.  I had not considered the posibility that someone had forced a screw that too big in there.  I had wondered about using a technique I've applied in other applications (where the screws are in the same scale as human hands) that involves counter drilling the plug with a  reverse threaded tap.  When I've had to do that in the past, the screw has generally caught and backed out from the torque on the tap (instead of yielding and letting the tap bore into it.)  I don't like doing that, but it's saved my rear a couple of times, but the smallest bolt I've tried that on had a 5 mm head.  This is an entirely different ball of wax. I am still contemplating disolving the screw with alum, even if that means I have to stick the dial down with double sided tape until I gain the skills to actually replace the screw.
    • Hi Thomas, you should be able to find the right (or on close to beeing) in a Ronda or DCN balance staff catalogue. Cousins uk have those available as a download.
    • Hello everyone. My name is Cees (pronounced "case"). I have been working on watches for a few years now. Got down the rabbit hole when I started watching "how to" videos on watch repair when my watch broke while on holiday. I'm not interested in collecting watches, but purely in the technical side. I love fixing them and also love collecting the tools I need (or might possibly need one day...).
    • The movement is FHF, something like this. But it will not help much to find stem.  Sometimes making one is easier
    • I think they all have their pros and cons, the one I suggested is a threadlock loctite product (Loctite is now owned by Henkel), In general I use the current one that is recommended on their Loctite page (link here)   I use blue (243) for the actual crown the (stick is actually 248 which is the stick version of 243), like I said it is very convenient for using on stems. Blue holds the crown for everyday use, but can be removed if you need to with a little heat. I use the red 277 for things like stem extensions where I have no intention of ever removing it. The purple I don't use (but I have seen some youtubers use it) as I think the blue is removable so why take the risk on a weaker product.   This is interesting, and a useful bit of information to know 🙂
×
×
  • Create New...