Jump to content

Case Opener

chadders1966

By chadders1966
in Tools & Equipment

 Share

Recommended Posts

chadders1966 WRT Addict

chadders1966

Posted
Posted

Hi everyone

 

If you've seen my previous threads on the subject of the LG wrench you'll know I'm looking for a good quality case opener. I did some time ago briefly consider buying one of the Chinese copy 5700s, but decided after taking Mark's advice it would be money down the drain. I have been looking for a used Bergeon 5700 or similar (I like the LEM (?) that Geo showed) and have been looking at the following listing from Ebay France, number 351469560721. Does anyone have any views on this item? I can see that parts of the head are missing, and also thought the printing on it looked a bit odd. Even though this costs a lot less than a new one, it is still a fair amount of money to spend. Thanks

Stephen

Link to comment
Share on other sites
mk3 WRT Addict

mk3

Posted
Posted

I have an LG watch wrench, I have always found it to be a good quality tool which has never yet let me down. Looking at the damage on yours it is hard to see how that even happened, the metal casting must just have been fractured from new for it to have broken from hand force. I have used a lot of force on mine at times to remove some pretty stubborn watch backs including ones that appear to have been glued on after I removed them. You must just have just been unlucky to get a defective one. I would imagine one or two others here have an LG wrench amongst their tool sets that have given them no issues?

Link to comment
Share on other sites
chadders1966 WRT Addict

chadders1966

Posted
  • Author
Posted

I don't feel in any particular way about their products. I know that they are well regarded, and I was happy to give them a chance to put things right as mistakes do happen. The fact that they took 6 weeks to report back and then tried to blame the customer for what must be a material or manufacture problem is what concerns me, and why I would not want to buy any of their products again. The fact that Cousins completely ignored the companies 'findings' and gave me a full refund indicates what they thought of this as well.

Link to comment
Share on other sites
chadders1966 WRT Addict

chadders1966

Posted
  • Author
Posted

If there is anybody who is familiar with the Bergeon 5700 I would be grateful if they could have a look at the listing I mentioned in my first post, 351469560721 on EBay France. I am considering this but am concerned with two issues:

1. Is it the genuine article? I have no definite reason to doubt this, but as I mentioned the printing on the head doesn't look very professional;

2. Also on the head the two thumbscrews (?is that even the right word?) that control the upper jaws are missing. Is it still in working order?

Any help/advice would be appreciated as it would be quite an investment for me. Thanks

Stephen

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • HectorLooi
      Battery

      By HectorLooi · Posted

      Usually the coiled spring contacts the piezo sounder and the finger spring is the ground.
    • Waggy
      How to store one dip

      By Waggy · Posted

      So I checked with my friendly local lab supplier and they can supply the following in 2.5 lt bottles: Tetrachloroethylene (B-Dip) - approx ￡65 Trichloroethylene (one-dip) - approx ￡43 n-Heptane 99% (Essence of Renata) - approx ￡35 Hexane - approx ￡45 I can't import or buy locally the 'real' products, hence the raw chemicals above. What do you think would be my best option? I'm edging towards Trichloroethylene - I know there are greater health risks, but given the very small quantities used for each treatment and 99.99% of the time it will be sealed in a jar, I think any risk is vanishingly small? This is mainly due to its assumed superior cleaning properties, or from the experience of this group, is the extra cleaning noticeable compared to its safer alternatives?
    • Kkramme
      Blew it with a coil

      By Kkramme · Posted

      Unfortunately after much investigation, apparently the coil has been discontinued! Shall I get my service guy to try the solder or the conductive paint? 🎨 Final recommendation please🙏
    • Dmitry
      Eta 2970-1 rotor mount stops watch

      By Dmitry · Posted

      Here are the pics of the bridge. Looks correct, but as soon as I screw on the rotor, the watch stops. Video here: https://1drv.ms/v/s!ArG5E62RGctxjokY5ws85BzuJLVakA   Pics. Might have figured it out. I have been working on this watch for a while and since I got it as a non runner in a terrible shape, there was no guarantee that parts were proper. I think the main screw that was used on the rotor was too long, so it was stopping the main train. As soon as I fished out a much shorter and larger headed screw, things were good again. Please celebrate with me.  
    • KarlvonKoln
      B-Dip residue?

      By KarlvonKoln · Posted

      One-dip or naphtha should be safe, but are you sure it isn't magnetized?  I would also check that.  Although, if that balance is from an Elgin 760 0r 761, I would think it would have a hairspring of non-magnetic alloy.
×
×
  • Create New...