Jump to content

I need help identifying this Rolex and it’s movement.


Recommended Posts

10 minutes ago, Neverenoughwatches said:

I hate to say it but no way is that a Rolex

I would agree,  the balance looks all wrong, the modern rolex balance is adjusted using a special tool and not a by moving the adjustment arm used in most other watches, so this would either have to be something posing as a Rolex, or an older type. However the older types would not have a spring loaded balance jewel system so this rules out this explanation. In addition to this, the text on the movement is different the "seventeen Jewels..." appears to be etched or raised, but the "...Rolex Geneva" seems to be printed, which indicates to me that this was added at a later date, again to make it appear it is a Rolex. Finally, the movement is absent any decoration (perlage, striping etc...) which I have not seen in a Rolex.  I'm no expert on Rolex and (of course) there are exceptions to what I have shown, but this would raise alarm bells if I were looking to purchase it.

Edited by Waggy
  • Like 2
Link to comment
Share on other sites

1 hour ago, Nucejoe said:

Its a ST96 mumbi Rolex.

 

1 hour ago, Nucejoe said:

Its a ST96 mumbi Rolex.

Certainly is Joe. But at least the OP can get plenty of spares.

3 hours ago, Waggy said:

I would agree,  the balance looks all wrong, the modern rolex balance is adjusted using a special tool and not a by moving the adjustment arm used in most other watches, so this would either have to be something posing as a Rolex, or an older type. However the older types would not have a spring loaded balance jewel system so this rules out this explanation. In addition to this, the text on the movement is different the "seventeen Jewels..." appears to be etched or raised, but the "...Rolex Geneva" seems to be printed, which indicates to me that this was added at a later date, again to make it appear it is a Rolex. Finally, the movement is absent any decoration (perlage, striping etc...) which I have not seen in a Rolex.  I'm no expert on Rolex and (of course) there are exceptions to what I have shown, but this would raise alarm bells if I were looking to purchase it.

Even without being an expert, you just know when something is of a lesser quality than the brand in question. This really couldn't be any less. Sorry for the OP, but when learning to spot fakes and this example is crap. All you really need to do in most cases is to compare and see what that brand produces as genuine. 

Link to comment
Share on other sites

Thank you all for replying and providing me with information! I was going to purchase it but wanted to verify if it was authentic or not. Thank you for helping me not make a costly mistake! I am new to the world of horology and am searching for my first automatic watch purchase. I am looking for a good vintage watch, and came across that “Rolex”. Anyone have any recommendations for a good vintage timepiece? I was also looking at Omega.

Link to comment
Share on other sites

57 minutes ago, AB23 said:

Thank you all for replying and providing me with information! I was going to purchase it but wanted to verify if it was authentic or not. Thank you for helping me not make a costly mistake! I am new to the world of horology and am searching for my first automatic watch purchase. I am looking for a good vintage watch, and came across that “Rolex”. Anyone have any recommendations for a good vintage timepiece? I was also looking at Omega.

How much were they asking?  

Link to comment
Share on other sites

It won't take much time here to educate your eye to spot a fake. I learned quickly by comparing a movement against Doktor Ranfft or 17jewels.info. Did the seller not say which movement the watch had? This is a clue...

Search the YTers for a watch similar to what you're interested in. Many of them have how-to-spot-a-fake series, too. It won't take long to learn...

Edited by rehajm
Link to comment
Share on other sites

2 hours ago, AB23 said:

Thank you all for replying and providing me with information! I was going to purchase it but wanted to verify if it was authentic or not. Thank you for helping me not make a costly mistake! I am new to the world of horology and am searching for my first automatic watch purchase. I am looking for a good vintage watch, and came across that “Rolex”. Anyone have any recommendations for a good vintage timepiece? I was also looking at Omega.

So many quality brands to choose from. Omega, Longines, Zenith, Movado, Hamilton, Vulcain, Benrus, Bulova, Tissot,Tudor, Certina, Eterna, Vertex , Roamer, Seiko, Buren in fact any original brand that made military watches were capable of producing good quality watches. Most brands made watches at various price points as well.

  • Like 1
Link to comment
Share on other sites

3 hours ago, AB23 said:

searching for my first automatic watch purchase. I am looking for a good vintage watch

There are so many possibilities, it's hard to know where to start without more information. What is your understanding of the terms automatic (your "Rolex" isn't automatic) and vintage, and what qualities do you expect in such a watch? Is the brand name (recognition, prestige) important, or are you more interested in its objective characteristics? Most important of all, what is your price range?

  • Like 1
Link to comment
Share on other sites

4 hours ago, AB23 said:

Thank you all for replying and providing me with information! I was going to purchase it but wanted to verify if it was authentic or not. Thank you for helping me not make a costly mistake! I am new to the world of horology and am searching for my first automatic watch purchase. I am looking for a good vintage watch, and came across that “Rolex”. Anyone have any recommendations for a good vintage timepiece? I was also looking at Omega

Costly mistakes are usually a good way to learn. Is a lot easier to learn sometimes if there is a penalty for making a mistake.

One of the problems when purchasing watches are there sealed up typically. The problem with the sealed watch is you don't know what's inside. The best way to buy used watches find a dealer of used watches with a good reputation. Someone who tells you this is a Rolex watch you can trust it's a Rolex watch. Versus whenever this watch was purchased which by the way was where exactly?

Oh and then there is the other little problem super fakes. Because a watch like a Rolex is worth money people are spending a lot of time making fake watches. It's back to buying from somebody with a known reputation where if you discover for some unknown reason it's not right They would give your money back.

 

 

 

Link to comment
Share on other sites

No stud screw and I rest my case!

Rolex watches are truly high-quality watches. Too bad 19 out of 20 spotted Rolex watches are fake, so unless you're already known to be financially successful no one will think you're wearing a genuine Rolex. Anyway, if you really love a particular brand, like Rolex, you get it anyway as you don't care what other people may or may not think.

But I'm with @Neverenoughwatches on this...

3 hours ago, Neverenoughwatches said:

So many quality brands to choose from.

 

  • Like 1
Link to comment
Share on other sites

I was going to suggest a Tissot Seastar as this is a quality brand and value for money - another thing is that they don't cost the earth, so even if you are unfortunate enough to receive a fake (lightning can strike twice) it wont be the end of the world. It's sad that buying watches as become such a mine field, bizarrely, even relatively inexpensive watches such as a Seiko are sold on eBay for $10 and are obvious fakes or watches that are cobbled together from spare parts from several watches (Frankenstein's) with 'after market' dials etc. One wonders how they can make any profit bearing in mind the cost of the parts and labor etc. to make such a fake/frankenstein???

I agree with @VWatchie that one way to avoid this is to buy from reputable sellers, but even this isn't fool proof, as even these guys are only human and can be caught out by the super fakes.

It's an interesting point @VWatchie raises that popular and commonly faked watches (such as Rolex) will elicit a response by most people who will automatically assume it's a fake, so if it is the wow factor someone is looking for, then wearing a Rolex will backfire even if the watch you have is genuine. Bearing this in mind it may be a better tactic to look for a quality watch that is not plastered on every magazine or airport departure lounge... dare to be different 🙂

@AB23 I'm glad the forum responded quickly and prevented you making a costly mistake with that 'Rolex", it's in everyone's interest that such fakes are not sold. I know saving one person is just a drop in the ocean..... but its like the saying "how do you eat an elephant?....... One bite at a time" hopefully this was just such a bite!

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Personally I would salvage the missing screws from some donor movement.  I also bought a random selection of screws "Assortment of Stainless Steel Watch Screws" for next to nothing.  As for using an Alum solution - I had great success with that removing a rusted stem from a stainless steel crown.  The best piece of advice I read on doing that was to keep the solution warm so that the reaction didn't take weeks!  I did it in a couple of hours with the solution in jam jar and the jam jar in a saucepan full of water which I left on an induction hob maintaining about 60C in the Alum solution.
    • I decided that it was time to tackle the piece that I'd set aside as my first project. The subject in question is a Gruen Veri-Thin pocket watch.  It winds and "runs".  On the time grapher, it has reasonable amplitude (240 or so depending on the position), but was loosing close to a minute a day.  The stem also has the annoying tendency to just come out when pulled, which makes it super hard to set the thing.  As with many things this one started sideways and just got more so.  I was able to overcome the mangled "tab" on the back case cover (a well placed, very sharp knife enabled me to get in when I couldn't get a purchase on the mangled tab with a case knife.)   I was then sort of shocked to find that one side of the dial was held down with some sort off tape or adhesive material as someone had broken the dial foot screw on that side and left the broken screw in the mail plate. The loose stem does in fact seem to have been a poorly tightened setting lever screw, but I'm afraid there may still be gremlins in the keyless works.  While I was able to get the stem to stay in by putting everything in the right place and tightening the setting lever screw (before I took it all apart for cleaning and inspection), it just didn't seem to all sit right. The final gremlin showed up when I was taking off the lower cap stones for the balance and escape wheel (yes the Gruen 380 seems to have a cape jewel on the escape wheel).  The balance stone came off fine (but that in fact is the smallest screw I've ever seen.  When I turned the movement around to get the one off the escape wheel setting, I found that the screw head had been mostly sheared off.  After some reading and looking at what I had, I decided to try and tease what was left of the screw out of the hole by nudging what was left with the corner of my smallest screwdriver.  After 20 minutes or so, I was able to get the remains of that screw out. The picture I'm including of the disassembled movement was taken before I got the second cap stone off, so in the picture, it's still attached to the main plate (for those looking carefully, you'll only see the one cap setting in the pic.) Now I'm left with: A broken dial screw inside the main plate that needs to come out A broken cap stone retention screw that I have in my parts tray, but that is strictly useless and needs to be replaced. The need to get another dial foot screw I'm contemplating solving the first problem by soaking the main plate in an alum solution.  I think the main plate is brass and shouldn't be affected, but I have not been able to confirm.  This seems like the easiest option as I can't really access both sides of the screw to use the pricey Bergeon tool (which I don't fancy buying unless I have to.) I have located a couple of donor movements and have questions out about whether or not the include the dial foot screw and prompting for pictures of the dial side so  evaluate the cap stone settings.  I've also found that a supplier in this country does have the cap stone settings, but isn't overly clear about whether the screws are included. Are these the types of things that one can scavenge out of assortments or is it best to just grab one of the donors assuming that they look like they have what I need?  
    • I visited this place last year just before they closed their counter service - amazing shop (filled from floor to ceiling!) and the guy that was working there was really knowledgeable and helpful!. Their website isn't as good as Cousins but I understand that if you fill out the contact form they have stuff that isn't on the site. https://gleave.london/mineral-flat-bottom-domed/
    • As always in this game the answer is “it depends “ because the first one worked out ok doesn’t mean all will. A case could be made in a way that it would not really matter much, sounds like your first example. However a case could also be made so that only a tension armoured crystal could be used. Generally you replace like for like to maintain the integrity of the watch.   Tom
×
×
  • Create New...