Jump to content

Longines Pocket Watch Almost A Century Old


GuiBer

Recommended Posts

Here it is my oldest watch, and which in fact has a very strong sentimental value to me, as It was bought by my grand-father in 1917 and he weared it since then, until he died in 1971. When I was a little kid I enjoyed very much to sit on my grand-father knees and ask him to put the watch close to my ear to listen its harmonious "tic-tac"!

 

I inherited it some years ago, after being serviced by a professional watchmaker and it is working fine.

 

I wrote to Longines in Switzerland sending  its serial number and asking for some information. They kindly replied me informing that it is an "EMPIRE" model, in silver 0,90 with a 18.79 ZZ movement,  manufactured in 1916 and sold the 9th July 1917 to the watch-house "JULES MANGE" in Lisbon ( where certainly my grand-father bought it).

 

post-1304-0-46537400-1438884346_thumb.jp

 

post-1304-0-23290100-1438884408_thumb.jp

 

post-1304-0-91850200-1438884436_thumb.jp

 

post-1304-0-72863300-1438884470_thumb.jp

 

As you can see the silver case is a little too dark. Should I clean it ? If so, what is the best way to do it?

 

 

 

 

 

 

Link to comment
Share on other sites

That's a lovely looking watch GuiBer. It's wonderful to own such magnificent family heirloom, I know because I now have my father's pocket watches.

Regarding polishing, I would only give it an occasional rub with a silver cloth to keep the oxide at bay.

Link to comment
Share on other sites

Nice P/W shame about the dial. Take the movement out remove the glass and put the whole case in silver dip but do not leave it in too long, wash out in warm soapy water and dry, then buff with a good silver cloth. That is how I want about cleaning silver watch cases.

Link to comment
Share on other sites

A silver dip for the whole case - and then an occasional exterior light polish with a silver cloth should be fine - but make sure the interior bits are cleaned completely of the dip before re-assembly.

 

It's a lovely watch - don't worry about the dial - that's part of its history.

 

Cheers,

 

Will

Link to comment
Share on other sites

Mostly good advice here and it's been a few days so maybe you've done something already but in my opinion the patina is valuable and shows parts of the history, love your story, thanks for sharing, if you have to do something start with the lightest cleaning method first and work up to the strongest because once u do it u can't go back

Through watchmaking I restore connections in people's lives!

  • Like 1
Link to comment
Share on other sites

Silver dip is not an abrasive so it will not harm the case the silver cloth has no abrasive parts to it, it is a smooth cloth it is for cleaning silver, the girls in the shop that I worked in would clean stock with both so it is perfectly safe for your P/W.

Link to comment
Share on other sites

I don't think anyone thought silver dip was abrasive Oldhippy, it's just that it cleans every bit of tarnish off and sometimes I think an old watch looks better with some dark bits left untouched. I know this sounds a bit hypocritical coming from me who normally like to see most things looking like new!

  • Like 1
Link to comment
Share on other sites

Thank you all for your suggestions! Perhaps I'll try first a light polish with a silver cloth. I don't want to get the watch in a "almost" like new condition.

 

For me the most important is its sentimental value, and a little of "patina" goes certainly well with its age! 

  • Like 2
Link to comment
Share on other sites

  • 3 weeks later...
  • 3 weeks later...

You have an excellent family heirloom, I am a Longines Collector, nice piece!

I too have a similar story about my Grandfather and a PK I inherited.   Later in life that PK was responsible for getting me into Horology.

Kind of funny how something so small can end up sending you down a path in life.....  Or, should I say Up a path?   :woohoo-jumping-smiley-emoticon: 

Thank You for the great story.  

Cheers!

MeticulousOne

Rick 

Link to comment
Share on other sites

Hi Rick, thanks for your words about the watch I inherited from my grandfather. 

 

I absolutely agree with you about the "magic" feeling transmitted by an inherited watch. I think this is because TIME is perhaps our big wealth, and our lives depend greatly on how we spend it!

 

A watch can eventually be a friend, a confidant, an adviser, but it surely is a "witness" of our lives, encapsulating in it our good and bad moments, that could have last seconds. minutes, hours...

 

So when you receive a watch that went along with someone for many many years (which is not so common nowadays), you are in fact receiving a bit of that person life history! And if that person is someone very important in your life, it's really amazing and comforting!

 

Cheers!

Edited by GuiBer
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Thank you for the advice.  Actually I have already ordered a replacement one as soon as I broke the setting lever screw.  It is supposed to arrive today or tomorrow, I got it from AliExpress for $27.51. In the meantime this Sunday I got from amazon the cheapest mechanical watch I could find (a pocket watch with a 2650G movement).  That movement is now sitting disassembled and waiting for reassembly.  I have to say I found that movement pretty ugly compared to the ST36.  The fact that it is skeletonized and center second made it interesting but all the bridges feel very bad quality. One thing which happened with this one (due to the skeleton nature) is that I had trouble removing the hands with my presto tool (I have levers on order but not arrived yet).  I bent a bit the little retainer (the part at the bottom of the picture).  Then later on I couldn't find the cannon pinion.  I finally found it it was in the hour wheel.  I must have pulled it out a bit initially and then oil kept it in there. The other thing which happened is that when I tried to open the case back which the back crystal (plastic, glued) came out.       Anyway tonight is reassembly time for this one. I also have an NH35 and a Mingzu 2813 on order. One question:  I was thinking about getting some old soviet movements which I see on ebay for pretty cheap.  All that to keep practicing and hopefully learn not to break anything before I start trying to service a real watch.
    • The ST36 isn't an expensive movement, so it might be easier to just get a replacement for parts. Here's a listing in the U.S. for $33 + $3 shipping. Once you get current movement running you can tackle the tangles hairspring without the pressure of making it worse.   https://www.ebay.com/itm/353824212893?itmmeta=01HYDN4TGZSXFCW4TXZ2THH0C1&hash=item526191079d:g:sT4AAOSwHidhcQO6&itmprp=enc%3AAQAJAAAA8Jw5K76smZgFGzM5ubLY769v%2B6EbBphCYo99M48gxLxxMjir9tRyn32O8Q5AgmKh1aKUP%2FfaCOIz8a7YMGkflhGWus7BDQIzrs45yo8NCZ66Jmti1Qli2%2BjaAm%2F8Ogg81F17LdC5Ulu54cnXSOCtaMkQcp03pcluBqTAuZPxbYwkrOC38sb%2FtlDewlZBOhjtA7pZTTMAql7hFKbrkc5RyF%2BtGL2%2Br9BS7mzgd%2BxdDF08HcVn6rvOawDjEbMPs9mYSegv6DVnSoiYYpMGzPJE7Qyd782Brjl05GQTL9MzpFuWrQvUTNxyY5%2BNQi18XTmf4A%3D%3D|tkp%3ABk9SR8yok7XzYw
    • It appears to me that you have overlapped the hairspring.  Hard to say for sure with the pictures you provide.  If so, it is one of the easiest hairspring fixes.  You will have to remove it from the balance cock and the balance wheel to do it right.  There are videos that show how this is done.  Off hand I dont recall where they are. Having said this, preforming this repair is advanced work.  Put it aside and come back to it in six months to a year.  Otherwise, you might make it worse.
    • OK thank you a just want say thank you  to everyone who replieded me on this web page when I needed help on this watchrepairtalk have learned so much even with the pallet adjustment a can do it now all thanks to you all been a very great help God bless you all.
×
×
  • Create New...