Jump to content

Its a west end watch .Want to know how genuine are these pocket watches ..Claims to be from 1800s and the other one (on the red background) 1920s..Any idea how much should I pay for it.


Recommended Posts

They are genuine with the exception that neither are remotely "railroad" anything.  These are almost bottom of the barrel quality, just a hair above Roskopf. Many cheap watches from the early 20th century incorporated railroad themes to promote a view of quality; a dead giveaway is usually the mention of railroad and/or images of trains. I doubt either is late 1800s, both look 1st 2 decades-ish of 20th century (maybe up to 30s or so).

 

These are worth very little. But might be fun to fix up and carry around.

  • Thanks 1
Link to comment
Share on other sites

Sorry you cannot compare these pocket watches to that bloody Russian crap Roskopf. Both are Swizz made. The first has an average jeweled movement, the second is at the lower end because the train isn't jeweled. The dates are about right. 

Link to comment
Share on other sites

 You can find all sorts of  calibers in west end watches nearly all are of low to mid quality, there are few exceptions however Longine movement powered some  SECUNDUS ( a sub brand of west end ) for the Indian elite. 

The most famous class is the SOWAR, a Persian word meaning rider ie; one who rides, in farsi if you ride a bicylce, a horse, motor cycle even a aeroplane you have sowar ed the vehicle. 

Sowar was initially made for the British Indian cavalry.

Not many matchless were made but no rare west end watch  as fifteen million pieces were sold world wide, and nothing is obsolete in India.

Wear your west end watches in good health pal.

 

  • Thanks 1
Link to comment
Share on other sites

50 minutes ago, oldhippy said:

Matchless" and "Antimagnetic on dials is just a distraction from the quality of the Watch.

I understand that dial names labels etc can draw attention and i bet sales ,now what red blooded male wouldnt want Hunter or Mustang on the face of his watch ( yes I've seen both these names on actually quite nice looking vintage watches, and i dare to admit i bid for one with Mustang and a logo of a stallion  on it 🤣 ). I cant put any meaning to matchless though unless like Richard said non comparable. I was hoping for some obscure name for a feature.

Link to comment
Share on other sites

 What sold west end watch in my neck of the woods was that  importers provided spare parts, even today balance complete for fifty year old fhf70 can be bought. 

You get a standard grade automatic ETA and spare parts to it, so its still a daily wearer specially in rural areas. 

Spare parts to  bulova, Elgine, waltham  are  not available here, mainly due to it being considered an American brand despite the Swiss movement in such American brands. Same Swiss movement in Swiss watch sells fast.

Whoever though of watch market bearing the brunt of potitics.

 

 

  • Like 2
  • Thanks 1
Link to comment
Share on other sites

On 6/19/2023 at 4:39 PM, oldhippy said:

Both are genuine. The first is the better of the two, the movement is jeweled and the second is not.  The first could be a silver case the second isn't and it has a hair line fracture in the dial.  

Thank you so much sir that was such a good insight…

 

19 hours ago, Nucejoe said:

 You can find all sorts of  calibers in west end watches nearly all are of low to mid quality, there are few exceptions however Longine movement powered some  SECUNDUS ( a sub brand of west end ) for the Indian elite. 

The most famous class is the SOWAR, a Persian word meaning rider ie; one who rides, in farsi if you ride a bicylce, a horse, motor cycle even a aeroplane you have sowar ed the vehicle. 

Sowar was initially made for the British Indian cavalry.

Not many matchless were made but no rare west end watch  as fifteen million pieces were sold world wide, and nothing is obsolete in India.

Wear your west end watches in good health pal.

 

Thank you so much sir finally understood the deal with this brand being populated (widely available ) in India …will love to learn more 

Link to comment
Share on other sites

3 hours ago, Brunowatch1900 said:

Thank you so much sir finally understood the deal with this brand being populated (widely available ) in India …will love to learn more 

Best place to get an idea of the price is ebay, of sellers from India.

I would buy the Matchless if you love it, providing the hairspring coil is unmolested.

 

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hello and welcome from Leeds.  No such thing as a stupid question.   Find something to practice on before starting the Vertex. 
    • I'm looking for the movement spacer ring for a Vertex 1944 military 'dirty dozen'. Ideally, I'd like to buy an original, although that may prove difficult. So, anyone with anything similar or just the correct sizings, would suffice for now. Alternatively, is there anyone that may be able to machine one (preffered) ?  Or maybe even the dreaded 3D printing ?
    • Fashion watch casebacks are extremely tight with no gap for a knife to enter. A razor blade is the only tool that gets me in with a sharp ping as the back releases. Personally i wouldn’t modify, as it is you can remove and replace though somewhat difficult , with a mod it may not stay on. It could very well be a sharp edge that keeps it in place , a light rub might take away that edge ? It wouldn’t be worth that risk to me, just how accurate is a drill and the chuck, its not the accuracy of a lathe . 
    • Quick hello. I'm Wayne, living in N Wales, UK. Total newbie to watches.  Always liked them, but never got deep into them.   Anyway, last year, I dived in and bought a vintage Omega, which turned out to be a pig, so it was returned.  I am a engineer by profession, so was annoyed that I didn't know how to repair it myself. So, I then bought a Omega Dynamic chronograph, which works perfectly fine and I absolutely love it. Then a friend introduced me to the 'Dirty Dozen' and being ex military, I wanted one. So, now, I own a Vertex DD in need of repair and gentle restoration. (I have restored my own classic car, so am well aware of maintaining as much originality as possible) and I love the age and patina on the watch. And finally, I am now hooked on watching watch repair videos on UToob and would just like to learn and give it a go as a hobby. The professional level tools for this job are hugely expensive though, that's my first learning curve 🙂. Anyway, expect me to pop up asking wildly stupid questions around the forum.    
    • The pins on those are a bit aggressive, not handed i believe.  I find them easier to unhook if i back them out where the spring begins to wind away and widen out. There's also a trick to stop them snapping around to the openings, its also a good idea to soften the edges of the 3 closure prongs.
×
×
  • Create New...