Jump to content

Re-sizing a mainspring

Neverenoughwatches
 Share

Recommended Posts

Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
Posted

Eyup watch peeps, i hope everone is well. I've just had a random idea maybe crazy ? ( hey I'm a bit fruit loop what can i say ). It dawned on me today while playing with a mainspring punch that a mainspring could theoretically be adjusted not only in length but also in height. If coiled and retained it could be ground or lapped to size ( yes I'm leaving out loads of details on the process so start thinking ). What are people thoughts ?  Barmy ? Or,  you may just have something there ? 

Link to comment
Share on other sites
nickelsilver Distinguished Member

nickelsilver

Posted
Posted

Done it numerous times. There's a limit how much you can take off, and the sides become sharp rather than rounded and that has to be addressed. You can't take a 2.00mm spring down to 1mm for example, there won't be a hole anymore. I've only done it when there was simply no other option, typically ultra thin pieces. You really have to glue (I use black Loctite super glue) it to a flat support, and have a bit of a method to keep it uniform. If you don't glue it down, inevitably the center coil becomes thinner than the rest. Of course you have to grind a bit, then unglue and reglue the other side and do the same. It's a hassle, but can save the day.

  • Like 1
Link to comment
Share on other sites
Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
  • Author
Posted
17 minutes ago, nickelsilver said:

Done it numerous times. There's a limit how much you can take off, and the sides become sharp rather than rounded and that has to be addressed. You can't take a 2.00mm spring down to 1mm for example, there won't be a hole anymore. I've only done it when there was simply no other option, typically ultra thin pieces. You really have to glue (I use black Loctite super glue) it to a flat support, and have a bit of a method to keep it uniform. If you don't glue it down, inevitably the center coil becomes thinner than the rest. Of course you have to grind a bit, then unglue and reglue the other side and do the same. It's a hassle, but can save the day.

Thanks Nicklesilver, i just wondered if it was possible 🙆, the details i can now play around with. The main issue i figured would be getting rid of the burr.

Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

Rather silly if you ask me. If you do not do it right then the spring will not be the same strength from end to end, it could even cut or mark the coils or the inside of the barrel and the underside of the barrel lid. Why not just buy a spring if you cannot get the correct height get the next to it. There are plenty of places on the internet to search. Even members on here help out with stock.  

Link to comment
Share on other sites
Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
  • Author
Posted
1 hour ago, oldhippy said:

Rather silly if you ask me. If you do not do it right then the spring will not be the same strength from end to end, it could even cut or mark the coils or the inside of the barrel and the underside of the barrel lid. Why not just buy a spring if you cannot get the correct height get the next to it. There are plenty of places on the internet to search. Even members on here help out with stock.  

Ahh more to think about, i didn't expect it to be easy. It was only an idea to see if it was possible, i also have thousands of springs .

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Mercurial
      AS2063 - hand setting

      By Mercurial · Posted

      The cannon pinion (be it conventional style or what you see in this movement) should slip on its arbour so the hands can be set independently without affecting the gear train.  If there is too much friction between the cannon pinion and the second wheel, turning the hands to set them backwards can sometimes force the escape wheel teeth to overrun the pallet stones, creating the behaviour you describe. The train is running in reverse when this happens.  This can often chip the pallet stones. I’d say at least half of the watches I’ve inspected with very tight cannon pinions had chipped pallet stones. Hopefully this isn’t the case with your watch.  I’m not familiar with this movement but you need to get the friction in the cannon pinion adjusted correctly.  Hope this helps, Mark
    • Bonefixer
      AS2063 - hand setting

      By Bonefixer · Posted

      Pallet fork was in. I’d had the movement running ok, and only removed the balance to flip it over and install the keyless works and date mechanism. The pallet fork wasn’t locking the gear train when hand setting - it was oscillating as the escape wheel rotated. This may have been in one direction only - can’t remember. 
    • watchweasol
      Stem broken - can it be rescued?

      By watchweasol · Posted

      Hi   Find attached parts/repair notes for the JLC 911,  might be useful. JLC_JLC 910, 911.pdf JLC_JLC 910, 911 Repair Notes.pdf
    • watchweasol
      Intro

      By watchweasol · Posted

      Hello and welcome to the forum Dan. Used to know Middlesboro quite well, that was twenty years plus ago. Attached a little reading to get you started. TZIllustratedGlossary.pdf
    • JohnR725
      Can someone please explain watchmaker service mark interpretation?

      By JohnR725 · Posted

      for the most part no. Each individual watchmaker and/or shop had their own system. One of the shops I worked at basically had a reference to a page number in a book. then there are some shops that do no markings at all as they keep their records on a computer and they don't have to mark the watch. Usually if somebody is marking and they've service the watch before you'll see those next to each other. then as far as anything resembling a standard goes at one time the American watch and clockmakers Institute assigned all of their members a number. but that was a very long time ago and I doubt that they are using it anymore.
×
×
  • Create New...