Jump to content

From the Palmetto State, y'all!

Mattutron

By Mattutron
in Introduce Yourself Here

 Share

Recommended Posts

Mattutron New Member

Mattutron

Posted
Posted

Howdy, y'all, from sunny South Carolina!

I'm just starting my horological adventure, inspired by a 50-year-old Accutron (218D) purchased for my 50th birthday last April. There was a sentimental consideration when selecting a family present for a my semi-centennial celebration: What's more appropriate than a historically significant timepiece that has been ticking as long as my own ticker?  (OK, before my fellow Accutron brothers and sisters speak up, it hums not ticks.) 

Before that, my interest in watches was strictly practical and job-specific. As an outdoorsman and Scout leader, my "collection" consisted of G-Shocks, Suuntos and Garmins, with a smattering of analogs from Fossil (yes, I know). Since that fateful birthday, my interest in "real" timepieces has exploded. Who knew one could spend hours window-shopping online for watches on eBay, or watching repair videos on YouTube?!

I purchased a second, non-functioning Accutron (N3-218D) with the goal of learning how to repair it. Then came from Amazon shipments of tweezers, loupes, movement holders and all of the accoutrements necessary for the task, as well as the skeptical looks from my lovely wife... I found a source for the appropriate coil that seems to be the most common culprit and stripped the movement down to individual parts. And then ... Without a 20+ power microscope, I'm stuck; thus, the wait continues as I source an affordable microscope that won't draw more severe looks from the love of my life.

I've started a small, thought-out and affordable collection of watches, including a new Seiko 5 sport (4R36) and a Tissot Chemin Des Tourelles (Powermatic 80) dress watch. And just this week, I received two vintage (can't believe I'm saying vintage) 80s- to 90s-era Seiko 5s from eBay: a functioning 7009-876A and a non-functioning 7S26C (from which the balance cock screw is currently hiding in the berber carpet of my home office). Along the way, I dragged my teenaged son into this new world. One of his 15th birthday presents was a simple Orient Bambino, and on his own volition and using his neighborhood lawn-mowing earnings, he purchased a beautiful Seiko Presage dress watch for church. 

I suspect I will be tapping into the vast experience of this forum often as I semi-ignorantly dive head first into this new adventure, and in advance, I thank you for your patience and guidance!

-Mattutron (North Augusta, SC)

 

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Michael1962
      I'm going to be setting up a decent little workshop here at home.

      By Michael1962 · Posted

      Moved in. Now working out the best place to have things so moving around the room makes sense. The wooden movement testing rig may end up being suspended from the roof with some pulleys and ropes that I salvaged from some alfresco blinds that we replaced. I always seem to salvage things from things we scrap thinking, "I have an idea what I can use these for." I hope I'm not the only one that does that. My wife hates me for it. "What are you going to do with all this crap?" Anyway, here you go. If anyone has suggestions for workflow around a room, speak up. All Ideas are appreciated. The bench on wheels will carry either a laptop or my Samsung table for using with the little camera that is on the tripod for photos while dismantling etc. The small bar fridge in the corners going to have water etc in it and I might move the coffee maker from the kitchen out there as I am the only one that uses it. I want to get an ultrasonic cleaner so I may set up some sort of cleaning rig in front of the glass of the sliding door. Where the grandmother clock is currently standing. I'm hoping that I will be able to transition my working area, which is the table that the stool is sitting in front of, fairly easily between clocks and watches. I'll be doing my best to make sure that tools for each are separatedwhen stored. Logistics. I'll have a bit of wall space for being able to hang clocks if I find some that I wish to keep or hopefully at some time to be able to hang customer clocks for monitoring after servicing/repairs. The clock on the left in the blue pillow slip and the grandmother clock are earmarked for  Jarryd and his wife, Sara. He helped me move the benches in today. And then went on to tell me that ticking clocks drive him nuts. Who doesn't like the rhythmic ticking of a clock? I have a green pad for adding to the bench for a working surface. It is not a cutting mat or one of the Bergeon mats. It is actually a green desk writing mat. Was really cheap and will do exactly what I want, I think. I also have to get the sparkies back that put our new stove in to put some power points on the walls behind the benches. Hopefully this is all going to go well. I'm excited about it. It'll beat having to live out in the garage doing it. The other thing I have to do is cut a circle or square of plastic to go over the bouncing watch or clock part black hole in the middle of the floor. I would pretty much guarantee that anything that sproings off the bench would end up going straight down that drain. 😄      I think I have been on this forum about 4 years and still yet to really strike a blow. That's a bit sad isn't it. Signed up to Mark's watch course and have yet to buy the movement for working on. Have most of the tools I think I will need so now all just a matter of will.  
    • Neverenoughwatches
      Stem removal after fitting hands

      By Neverenoughwatches · Posted

      So leave off the seconds. Stand the movement on its edge, its the dial edge that rests on the pad ( either rubber or cork , something that wont slip ). Use a finger of your left hand to hold the movement upright,  right hand presses the release and flicks out the stem. I do it this way so i can see what I'm under a microscope. But you could hold the movement between two fingers of your left hand, its the right that has to manipulate the stem out by pushing the release and flicking out the stem with  right ring finger nail. Sounds more complicated than it actually is. I guess you could fix a push pin to something solid, then all you need to do is push the release against the pin, leaving your right hand completely free to pull the stem out.
    • HectorLooi
      Battery

      By HectorLooi · Posted

      Try putting everything back together and closing the back cover. I think one of the two springs has to contact the metal casing to ground the casing. So when you press the button, it will touch the contact on circuit board and close the circuit.
    • PeterS
      Stem removal after fitting hands

      By PeterS · Posted

      Yes, the seconds hand is the longest and goes almost to the edge of the dial. I can’t quite picture it how you do it on the rubber pad
    • Murks
      Battery

      By Murks · Posted

      A don't think so it leaked or damaged it because the watch itself works it just the buttons ain't working not connecting with the circuit board have taken more pictures of where the buttons makes contact with the circuit board.
×
×
  • Create New...