Jump to content

Magnifiers

chadders1966

By chadders1966
in Tools & Equipment

 Share

Recommended Posts

chadders1966 WRT Addict

chadders1966

Posted
Posted

Hi

I bet I'm not the only one here who struggles with which type of optical equipment to use ;). When I need to look/work in detail it's not so much a problem as I either use a microscope I already had, or use a 20x eyeglass on a holder and put my head on the desk. It's more for general inspection/day to day work, when just a bit of extra help is needed. I use clip on watchmakers loupes, which never seem to stay in place. I use a visor, which makes my head sweat and either pinches or falls down. I use eyeglasses with a holder, and I always seem to have to move my head to see. I use powerful reading glasses but keep needing to take them on and off. My next experiment will be to buy some cheap Chinese binocular loupes and try them.

One item I bought recently and have grown to quite like is a desktop magnifier (photo below). This came with a clamp and a stand, and I have been using it with the stand at the back of my desk with the magnifier coming down vertically in front of me. It is big enough that I can see everything in front of me through it. and small enough that I can fit both arms around it to work. I can also push it out of the way quite easily. Of course the optics aren't all that great, it is just a plastic magnifier and can't be used to see things in detail, I just use it for general 2-3x magnification. Also you need to have a high desk to use it like this as you need to look straight through it, looking slightly downwards gives a distorted view. However for about £15 I'm quite pleased with it, and will continue to use it. It seems to me that this is an area that you have to experiment and find what you are comfortable with, and that different people will use different methods. I just thought I'd share this one.

Stephen

 

 

post-373-0-10325300-1435564692_thumb.jpg

Link to comment
Share on other sites
JimInOz WRT Addict

JimInOz

Posted
Posted

A word of caution on the cheap binocular loupes.

 

I tried a set and found them to be extremely difficult to use. You have to adjust for inter-pupilary distance and then change the sight angles so each eye converged at a focus distance. Every time I made one adjustment another was required. They came mounted on safety specs so I ditched the loupes and used a clip on pair of magnifiers.

 

With these I can see most detail work and flip them up for distance vision.

 

For close-up I use a loupe on a head spring and for really close up I have an old lab microscope from eBay. I got a boom for it and use it for oiling etc.

 

I'll post some pics after dinner, I have to cook some nice fillets of rock ling while Ms Jim does the veggies.

  • Like 2
Link to comment
Share on other sites
JimInOz WRT Addict

JimInOz

Posted
Posted

Apart from the microscope, your setup is pretty close to mine.

Do you think all that magnification could fins a wee avatar? ;)

 

Uh Oh!

 

I thought only ΩForums had Avatar Police  ;)

 

I shall see what I can do Geo.

Link to comment
Share on other sites
DJT2 WRT Addict

DJT2

Posted
Posted

Being a novice to this hobby, I'm not sure I can add anything to this conversation that the experts haven't already suggested. However, I personally use an optivisor for most stuff & a stereo microscope for inspection & oiling.

Sent from my GT-I9505 using Tapatalk

Link to comment
Share on other sites
SSTEEL Distinguished Member

SSTEEL

Posted
Posted

As mentioned above, another vote for the Optivisor, I have a few different lens too, but find the best sense for general purpose is No'3, which gives plenty of working distance, and enough magnification for working, plus it has a 3.5% loupe which flips down and away easily.

 

Don't go for those cheap Chinese ones though, they are heavy, and very uncomfortable.  Ask me how I know :)

 

14157586147_0e8a34bbba_z.jpgUntitled by Micky Aldridge, on Flickr

  • Like 1
Link to comment
Share on other sites
oldhippy Distinguished Member

oldhippy

Posted
Posted

Could probably have got away with same when I was a little younger oldhippy. Find that I need a little more help these days.

I know what you mean. My site is none to good what with being diabetic and having to take insulin. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • PeterS
      Stem removal after fitting hands

      By PeterS · Posted

      Yes, the seconds hand is the longest and goes almost to the edge of the dial. I can’t quite picture it how you do it on the rubber pad
    • Murks
      Battery

      By Murks · Posted

      A don't think so it leaked or damaged it because the watch itself works it just the buttons ain't working not connecting with the circuit board have taken more pictures of where the buttons makes contact with the circuit board.
    • Neverenoughwatches
      Stem removal after fitting hands

      By Neverenoughwatches · Posted

      I think what peter means oh is once he has fitted the hands and  checked for  alignment if them and that they dont foul, how does he then hold the movement to remove the stem in order to case up. The dial cannot be laid on a cushion or in a movement holder as the hands will get damaged. This can be quite tricky for a beginner, what i do is  to stand the movement on edge on a rubber pad so it doesn't slip. Hold the top edge with one finger then my dominant hand uses 3 fingers to press the stem release and flick out the stem. See below peter, leave off the second hand as this is the longest and gets caught the most, then fit it once the stem is out. Alternatively place the movement in one of the cup style holders, i imagine this is what they are designed for. They only touch the very edge of the dial.  
    • PeterS
      Stem removal after fitting hands

      By PeterS · Posted

      Yes I understand that. What I’m asking is, after the hands have been fitted, it’s been checked that the hands do not touch etc. then I need to remove the stem to fit the movement in the case. I have the push type, I need to turn it upside down and push the setting lever post and pull the stem out. But of course the dial and hands are in place and I have a glossy dial with lume dots and I do not want to cause any damage while it’s upside down pushing on the post of the setting lever.
    • oldhippy
      Stem removal after fitting hands

      By oldhippy · Posted

      You have answered your own question. You just push the setting lever nipple in or if its the screw in type unscrew it a little. You should always remove any hands and the dial before putting it in your movement holder. 
×
×
  • Create New...