-
Recently Browsing
- No registered users viewing this page.
-
Topics
-
-
Posts
-
-
With this movement, the cannon pinion doesn't have the "stick-slip" function. The additional wheel attached to the bottom of the barrel has that. If the watch runs and only the second hand moves: remove the cannon pinion and check if that additional wheel moves (slowly). You can mark it with a sharpie. -
-
By Neverenoughwatches · Posted
??? The cannon pinion, which is your minute hand post, also drives the minute wheel. Then through a series of gear reductions drives the hour wheel ( hour hand post ) at one 12th of the rotational speed of the cannon pinion. I can see these connections made in your picture. With some wind put in the barrel both cannon pinion and hour wheel will be moving if the train and escapement are actively working. Put on the dial hands to quickly varify that. -
By watchweasol · Posted
Good entry level movements , Ronda, miyota, Seiko . No overly expensive either.and some service information available.
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.