Jump to content

TAG Heuer Movement Identification help needed

Paul80
 Share

Recommended Posts

Paul80 WRT Addict

Paul80

Posted
Posted

Hi all

Just started a service on my first ever TAG Heuer, an Aquaracer, from the picture below can anyone identify the movement, I can't find that logo on any list I have found.

Thanks for any help with this

Paul

 

Screenshot 2022-06-26 13-12-19.png

Link to comment
Share on other sites
Paul80 WRT Addict

Paul80

Posted
  • Author
Posted

Anyone notice in the documents linked above that they have a rather unusual recomendation regarding the use of Epilame.

Seems they don't apply it to the pallet or escape wheel but do apply it to the keyless works, seems a bit odd don't you think ?

Link to comment
Share on other sites
JohnR725 Distinguished Member

JohnR725

Posted
Posted
49 minutes ago, Paul80 said:

Seems they don't apply it to the pallet or escape wheel but do apply it to the keyless works, seems a bit odd don't you think

you need to know where to look in the tech sheet as they do put it on the escape wheel and the pallet stones.

Swiss service guides are interesting in that they don't always show everything. They are getting better which  is why the newer ones will show where the epilam goes the old ones will not. As because previously there would have been probably a separate document. Now they're trying harder to get in one place sometimes. So as you can see from the image out of the technical document they do put epilam on the escape wheel and the pallet stones and the balance staff. Yes they always put on the balance staff.

SW 200 epilam.JPG

  • Like 1
Link to comment
Share on other sites
  • 8 months later...
JohnR725 Distinguished Member

JohnR725

Posted
Posted
53 minutes ago, Waggy said:

Can anyone help identifying this "Tag" movement?

It's usually best to start a new discussion if it's a new watch. Often times discussions aren't seen as a new discussion and people may or may not bother to read the discussion. So you'd have better visibility is a new discussion

then I didn't know that there were using Chinese movements? We really need a better picture of the movement but it does not look legit at least the picture that I'm looking at

  • Sad 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Michael1962
      Leaving the forum for a while.

      By Michael1962 · Posted

      Hope you mum keeps on mending. I was adamant that I was going to get myself going after my stroke. I was only 52. I still have a lot of life left to live. Some people give up. Some people don't let it beat them. Your mum sounds like one of the winners. 👍
    • Michael1962
      I'm going to be setting up a decent little workshop here at home.

      By Michael1962 · Posted

      Moved in. Now working out the best place to have things so moving around the room makes sense. The wooden movement testing rig may end up being suspended from the roof with some pulleys and ropes that I salvaged from some alfresco blinds that we replaced. I always seem to salvage things from things we scrap thinking, "I have an idea what I can use these for." I hope I'm not the only one that does that. My wife hates me for it. "What are you going to do with all this crap?" Anyway, here you go. If anyone has suggestions for workflow around a room, speak up. All Ideas are appreciated. The bench on wheels will carry either a laptop or my Samsung table for using with the little camera that is on the tripod for photos while dismantling etc. The small bar fridge in the corners going to have water etc in it and I might move the coffee maker from the kitchen out there as I am the only one that uses it. I want to get an ultrasonic cleaner so I may set up some sort of cleaning rig in front of the glass of the sliding door. Where the grandmother clock is currently standing. I'm hoping that I will be able to transition my working area, which is the table that the stool is sitting in front of, fairly easily between clocks and watches. I'll be doing my best to make sure that tools for each are separatedwhen stored. Logistics. I'll have a bit of wall space for being able to hang clocks if I find some that I wish to keep or hopefully at some time to be able to hang customer clocks for monitoring after servicing/repairs. The clock on the left in the blue pillow slip and the grandmother clock are earmarked for  Jarryd and his wife, Sara. He helped me move the benches in today. And then went on to tell me that ticking clocks drive him nuts. Who doesn't like the rhythmic ticking of a clock? I have a green pad for adding to the bench for a working surface. It is not a cutting mat or one of the Bergeon mats. It is actually a green desk writing mat. Was really cheap and will do exactly what I want, I think. I also have to get the sparkies back that put our new stove in to put some power points on the walls behind the benches. Hopefully this is all going to go well. I'm excited about it. It'll beat having to live out in the garage doing it. The other thing I have to do is cut a circle or square of plastic to go over the bouncing watch or clock part black hole in the middle of the floor. I would pretty much guarantee that anything that sproings off the bench would end up going straight down that drain. 😄      I think I have been on this forum about 4 years and still yet to really strike a blow. That's a bit sad isn't it. Signed up to Mark's watch course and have yet to buy the movement for working on. Have most of the tools I think I will need so now all just a matter of will.  
    • Neverenoughwatches
      Stem removal after fitting hands

      By Neverenoughwatches · Posted

      So leave off the seconds. Stand the movement on its edge, its the dial edge that rests on the pad ( either rubber or cork , something that wont slip ). Use a finger of your left hand to hold the movement upright,  right hand presses the release and flicks out the stem. I do it this way so i can see what I'm under a microscope. But you could hold the movement between two fingers of your left hand, its the right that has to manipulate the stem out by pushing the release and flicking out the stem with  right ring finger nail. Sounds more complicated than it actually is. I guess you could fix a push pin to something solid, then all you need to do is push the release against the pin, leaving your right hand completely free to pull the stem out.
    • HectorLooi
      Battery

      By HectorLooi · Posted

      Try putting everything back together and closing the back cover. I think one of the two springs has to contact the metal casing to ground the casing. So when you press the button, it will touch the contact on circuit board and close the circuit.
    • PeterS
      Stem removal after fitting hands

      By PeterS · Posted

      Yes, the seconds hand is the longest and goes almost to the edge of the dial. I can’t quite picture it how you do it on the rubber pad
×
×
  • Create New...