Jump to content

Recommended Posts

Posted

Hi Everyone,

A friend asked to check his Seiko 5 watch that was a non-runner. To my surprise it was a quartz movement that apparently was expose to water.

Although, probably it is a fake Seiko, I was able to fix it after washing and reassembling.....

Any opinion about real or fake piece is appreciated.

Thanks

PHOTO-2022-03-06-13-08-55.jpg

PHOTO-2022-03-06-13-09-02.jpg

PHOTO-2022-03-07-14-21-59.jpg

PHOTO-2022-03-07-14-22-25.jpg

Screen Shot 2022-05-18 at 18.57.28.png

Posted (edited)
7 hours ago, Kepas said:

Hi Everyone,

A friend asked to check his Seiko 5 watch that was a non-runner. To my surprise it was a quartz movement that apparently was expose to water.

Although, probably it is a fake Seiko, I was able to fix it after washing and reassembling.....

Any opinion about real or fake piece is appreciated.

Thanks

PHOTO-2022-03-06-13-08-55.jpg

PHOTO-2022-03-06-13-09-02.jpg

PHOTO-2022-03-07-14-21-59.jpg

PHOTO-2022-03-07-14-22-25.jpg

Screen Shot 2022-05-18 at 18.57.28.png

Strange that anyone would want to fake a 100 quid  Seiko 5, but this does seem to be the case. I was going to say a watch from parts but the dial says different.  The 5 that Seiko puts on their dials indicates 5 attributes to that range. Though opinions of these attributes do vary some of them are always stated. An automatic is one such attribute clearly here this is not present. Day and date complication is another so this must be a fake dial. Others are water resistance and recessed crown, other opinions are diashock system and crown at four. Seiko themselves state a robust case and braclet. Lets test that therory here shall we with a lump hammer, same fate that should befall all fake watches 🙂

31 minutes ago, Neverenoughwatches said:

Strange that anyone would want to fake a 100 quid  Seiko 5, but this does seem to be the case. I was going to say a watch from parts but the dial says different.  The 5 that Seiko puts on their dials indicates 5 attributes to that range. Though opinions of these attributes do vary some of them are always stated. An automatic is one such attribute clearly here this is not present. Day and date complication is another so this must be a fake dial. Others are water resistance and recessed crown, other opinions are diashock system and crown at four. Seiko themselves state a robust case and braclet. Lets test that therory here shall we with a lump hammer, same fate that should befall all fake watches 🙂

As regards to making it run again, a new movement is very cheap to replace as Kalanag has said. But if you fancy an hour or so to service it is possible you may get it to run if the cmos is ok. The main culprits of these cheap movements would be battery leak damage to circuits although repairable barring the cmos. Would i repair that ? If i had it in my head to do it for fun and a few hours to spare then maybe. Another would be a debris laden rotor, quite easy to clean up. But I have seen rotors in an almost disintegrated state. Another might be the coil, although these are usually damaged by someone poking around looking for a fault. Or you just might be really lucky and it needs cleaning out and servicing. If you are set on repairing it and your friend is sentimental about it then give service or repair a go. A couple of  simple tech testers will ease that operation. The Quickest route is to swap out the movement, you should find them easily, i think i may even have one or two kicking around. And if non of that seems fun then i suggest two of these 🏸  a temp rigged up net one fake watch and a few beers with your mate. Way more fun 👍

Edited by Neverenoughwatches
Posted

Cheap Hattori/Epson movement  £2.50  at AGThomas . not worth taling the screws out at that price.  Might well be a Seiko 5 Dial the movement having been replaced with a quartz as the old one was beyond economical repair. Or it is possible its a Mumbai special.      sheet attached.

al21e.pdf

Posted

Hi,

Thanks everyone for your opinions, although I was suspecting that the watch was a fake, I just wanted a more knowledgeable opinion here. I do agree with Neverenoughwatches that this piece doesn´t have  any of the Seiko 5 attributes (https://www.seikology.net/blog/the-history-of-seiko-5), therefore, it is a fake beater, probably as Watchweasol said a Mumbai special (surprisingly, I´ve seen several around here). I do agree with most of the opinions that the cheap movement make it not worth the hassle to fix it, but I have a lot of fun doing it and learn some, so for me it was worth it. Second quartz movement in my hands, the first one an Omega 255.411... that took me a while since it has the wrong minute wheel. Hopefully, there was a wonderful tutorial with images in this forum, that allows me to note the wrong wheel.

Thanks a lot.

IMG_0530.jpg

Untitled.jpg

  • Like 2
  • 2 months later...
Posted
On 5/19/2022 at 1:39 AM, Neverenoughwatches said:

The 5 that Seiko puts on their dials indicates 5 attributes to that range. Though opinions of these attributes do vary some of them are always stated. An automatic is one such attribute clearly here this is not present. Day and date complication is another so this must be a fake dial.

I have also read this from other sources.  I believe that the day and date are always within the same window.  At least I have never seen otherwise. 

Posted

Does that mean its a Feiko?  Sorry, I'll get ma coat.

I've also been the victim of the mumbai special too.  It was a ricoh something or other. The thing is that when it was opened up, it was actually an automatic, at least the parts resembled those of an automatic, but it was so rough and badly put together that here was no point in even trying to practice on it.  A lesson learned.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Well, my fundamental stance is that I want to go in and out without leaving any trace other than a shining, perfectly running movement. So, no scratchings on the inside of the case back lid, no marred screws, no debris, no fingerprints, and so on. That is, my goal is to make it impossible for the FBI to track me down. As a professional, I suppose you might want to keep track of returning watches, but as @JohnR725 mentioned, we can keep detailed computer records without marking the watch at all. That may not be true for every watch, but luxury and COSC-certified movements do have unique numbers. John also says it’s best to leave no sign you were ever there, and I couldn't agree more. Now, suppose the Sea-Dweller I'm working on is one day scrapped, and you want to sell the case-back separately (perhaps the case was destroyed in a plane crash). Then the scribbles on the inside no longer reflect the current movement inside the case. Also, the engraving will likely halve the market value of the case back. It had been "sleeping" for about a week and a half. Yes, the "debris/old lubricant" theory is my hypothesis as well! It will be interesting to see what I find once I have time to start disassembling the movement.
    • I've repaired a few of these, having some success with stripping and cleaning the mechanism.  They are so cheap though, its hardly worth the effort in many cases.
    • Get well soon Old Hippy, torn muscles.,  not good
    • Id love to see how he has the output shaft mounted to this setup, as I have the same rotary stage and stepper in my build.
    • If you see at least one thread protruding, or even a half, then you may have a chance using this "tool", but don't squeeze hard. Lot's of patience, and if you notice any signs of loctite or other adhesives, then apply several drops of acetone on top of broken stem. Use heat (hair dryer) also. You should be able gradually turn it counterclockwise, just like i did on this broken Timex stem, which was glued with something like nail hardener. Then you can use an extender to save your broken stem. https://m.media-amazon.com/images/I/513DVvkfW5L.__AC_SX300_SY300_QL70_ML2_.jpg   You can also try cutting a small grove / slot on top of the broken stem to use 0.7mm flat screwdriver.   Depending on the Crown material and Stem material, you can try dissolving the stem. 
×
×
  • Create New...