Jump to content

Jaeger Le Coulter Atmos Clock


Mark

Recommended Posts

A family member brought this for me to have a look at today.

He wants to know more about but as you know, I'm not a big clockie.

Can anybody offer any information about this beauty?

Ta!

:)

471fadac76220440257d56e2e269cbf9.jpg

a4fd25df6bedfe45740477070e6708e5.jpg3e0335fb448158b2e2ac9d9905b9a3ee.jpg

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

That's exactly the same one that I have Mark. They are magnificent things and must be treated very carefully indeed. Do not try to adjust the time unless the escapement is all the way to one side of another, it won't like and damage cold occur. Also please don't try to remove the minute hand woyhout the correct puller. If you intend servicing it, send me a PM first as there are few things I would like to say about it.

Link to comment
Share on other sites

We have not decided yet. We may just remove the movement to clean the case and glass, but ultimately it does need to be cleaned and lubricated.

 

Personally I have never worked on one so I may have to refer him to a pro.

Link to comment
Share on other sites

The clock you have in the photos is a Atmos 5 calibre 526 these have the locking lever just under the dial they are a slightly more compact model with a hinged opening front. production ran from 1955 to 1984

Link to comment
Share on other sites

Very expensive to work on the expanding bellows of gas. Barometric changes causes mainspring to wind. Not unusual to spend a few hundred dollars just on the bellows

I have not worked on one.

 

Here is a website of someone who does

http://www.atmos-man.com/

He is also one of the moderators on the ClockSmiths Message Board

 

Al

Link to comment
Share on other sites

I like the inscription... looks like Mr F.S. Phillips joined Mars Limited just as the war was breaking in 1939.

 

Googling Mars limited brings up mainly foods (Mars bars) but I bet if this was the company he joined, the product line would shortly become vastly different.!

 

Love the clock.. quality always looks good! I can imagine this clock slowly ticking away a few hundred years after the human race has died out!

 

Anil

Link to comment
Share on other sites

Found this Mark 

http://www.jaeger-lecoultre.com/GB/en/content/setting-your-atmos-clock

I did notice the escape set up looks very similar to a 400 day clock.The same as the Jaeger they need very little energy to run.But if they are tiniest bit out of beat or bit grubby they just do not run. I would of thought it just need s clean.

Link to comment
Share on other sites

Hi,

 

I have a pdf file of the service and repair manual for  Atmos clocks issued by Jaeger it covers models up to 1952 the calibre 526 as far as the movement goes is slightly simplified but essentialy the same, I can send you a copy of the file if you wish. 

 

Also if your family member wishes to know more about the Atmos clocks in general then he should seek out a copy of a book by Jean Lebet called "LIVING ON AIR HISTORY OF THE ATMOS CLOCK" it is long out of print but can be found sometimes on ebay, it was published in a limited print run by Jaeger in 1997. I do have a copy of the book it only runs to 88 pages but is a fascinating read.

 

Wayne

Link to comment
Share on other sites

Thanks for the replies. Still not sure if we are going to service this.

Would really love to see that pdf Wayne.

Will contact you shortly geo.

You guys are the best :)

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites

  • 2 years later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hello, I am about 5 months into watchmaking and I love it!   The attention to precise detail is what really attracts me to it. (and the tools!) I am working on a 16 jewel 43mm pocket watch movement.   There are no markings besides a serial number (122248) .  The balance staff needs replacement. The roller side pivot broke off.  I successfully removed the hairspring using Bergeon 5430's.  I successfully removed the roller using Bergeon 2810.   Did i mention I love the tools?! I removed the staff from the balance wheel using a vintage K&D staff removal tool  with my Bergeon 15285 (that's the one that comes with a micrometer adjustment so it can be used as a jewel press as well as a traditional staking tool...it's sooooo cool...sorry..  can you tell i love the tools?) No more digressing..  I measured the damaged staff in all the relevant areas but I have to estimate on some because one of the pivots is missing. A = Full length  A= 4.80mm  (that's without the one pivot...if you assume that the missing pivot is the same length as the other pivot (I'm sure it's not)  then A = 5.12 mm...(can I assume 5.00mm here?) F=  Hair spring collet seat  F=  .89mm   (safe to assume .90 here? .. I am sure that my measurement's would at least contain  .01 mm error ?) G = balance wheel seat  G = 1.23 mm  (1.20mm?) H  =  roller staff  H =  .59mm  (.60 mm?) B  = bottom of the wheel to roller pivot   B  = 2.97mm  (3.00 mm?)     here I am estimating  again because this pivot is missing. So my friends, and I thank you profusely,  can you point me in the right direction as to how to proceed? Do i buy individual staffs?  or an assortment?   Since I don't know exactly the name of the manufacturer, will that be a fatal hindrance?   Tbh, I'm not even sure what country of origin this movement is. Thank you!    
    • Thats why i asked that question earlier, what happens if lubrication is placed directly on top of epilame ?  As opposed to walled within its non epilamed area . I'm not saying its right, i have no idea , just asking questions. 
    • thinking of where epilam should be removed did you know there was a patent that covers this? At least for the escapement I'm attaching it. GB1057607A-1 epilame.pdf
    • Back home...printing now.  Will report results
    • Oh well, if Master @nickelsilver says it's the way to go, then it is the way to go! I stand corrected! 🫡 Are there any other places where you're supposed to remove the epilame from the contact point of rubbing? I don't think so! Thanks for the effort @Neverenoughwatches, much appreciated! 🙂👍
×
×
  • Create New...