Jump to content

New member introduction

data89

By data89
in Introduce Yourself Here

 Share

Recommended Posts

data89 New Member

data89

Posted
Posted

Looking for help as I've never worked on a watch before. I will post my question in the forum. My field is electronics, but have always been able to fix about anything, in fact I just fixed a TV, a slot machine, a dremel tool, a faucet, and am working on an old truck (body and mechanical). However, this Wylar chronagraph triple date incaflex valjoux 72C is worth as much as my truck, but too delicate for me to make a mistake. Trying to get the stem out.

Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
Posted
57 minutes ago, data89 said:

Looking for help as I've never worked on a watch before. I will post my question in the forum. My field is electronics, but have always been able to fix about anything, in fact I just fixed a TV, a slot machine, a dremel tool, a faucet, and am working on an old truck (bodyre Wylar chronagraph triple date incaflex valjoux 72C is worth as much as my truck, but too delicate for me to make a mistake. Trying to get the stem out.

Hi Data. You're mechanical mind puts you in a good position to start learning, the reduced scale that you'll be working at will require  a fair bit of adaption though. Make a polite introduction in the correct section unless you've already done so. I personally  may or may not be able to help you with this as I'm a relative beginner with basic knowledge but the right person will definitely  jump in soon to help you.

Nucejoe Distinguished Member

Nucejoe

Posted
Posted

Welcome to WRT forum.

 Chronograph complication is your Phd level in watch repair, your watch might have to wait until you acquire the experience to service it or should be entrusted in hands of a master repairman. 

Regs

  • Like 1
Neverenoughwatches Distinguished Member

Neverenoughwatches

Posted
Posted
26 minutes ago, Nucejoe said:

Welcome to WRT forum.

 Chronograph complication is your Phd level in watch repair, your watch might have to wait until you acquire the experience to service it or should be entrusted in hands of a master repairman. 

Regs

Aye mate ,  I was hoping that would come from someone besides me.  If it's worth that much, and it were mine. I would want a shed load of experience behind me.

  • 1 month later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing

  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • VWatchie
      What's your thoughts on this Rolex Sea-Dweller, ref. 16600, calibre 3135 project?

      By VWatchie · Posted

      Well, my fundamental stance is that I want to go in and out without leaving any trace other than a shining, perfectly running movement. So, no scratchings on the inside of the case back lid, no marred screws, no debris, no fingerprints, and so on. That is, my goal is to make it impossible for the FBI to track me down. As a professional, I suppose you might want to keep track of returning watches, but as @JohnR725 mentioned, we can keep detailed computer records without marking the watch at all. That may not be true for every watch, but luxury and COSC-certified movements do have unique numbers. John also says it’s best to leave no sign you were ever there, and I couldn't agree more. Now, suppose the Sea-Dweller I'm working on is one day scrapped, and you want to sell the case-back separately (perhaps the case was destroyed in a plane crash). Then the scribbles on the inside no longer reflect the current movement inside the case. Also, the engraving will likely halve the market value of the case back. It had been "sleeping" for about a week and a half. Yes, the "debris/old lubricant" theory is my hypothesis as well! It will be interesting to see what I find once I have time to start disassembling the movement.
    • MikeEll
      Help with repairing a quartz clock

      By MikeEll · Posted

      I've repaired a few of these, having some success with stripping and cleaning the mechanism.  They are so cheap though, its hardly worth the effort in many cases.
    • watchweasol
      Oldhippy

      By watchweasol · Posted

      Get well soon Old Hippy, torn muscles.,  not good
    • SwissSeiko
      A lathe with indexing that won't break the bank?

      By SwissSeiko · Posted

      Id love to see how he has the output shaft mounted to this setup, as I have the same rotary stage and stepper in my build.
    • Poljot
      Broken watch stem in watch crown

      By Poljot · Posted

      If you see at least one thread protruding, or even a half, then you may have a chance using this "tool", but don't squeeze hard. Lot's of patience, and if you notice any signs of loctite or other adhesives, then apply several drops of acetone on top of broken stem. Use heat (hair dryer) also. You should be able gradually turn it counterclockwise, just like i did on this broken Timex stem, which was glued with something like nail hardener. Then you can use an extender to save your broken stem. https://m.media-amazon.com/images/I/513DVvkfW5L.__AC_SX300_SY300_QL70_ML2_.jpg   You can also try cutting a small grove / slot on top of the broken stem to use 0.7mm flat screwdriver.   Depending on the Crown material and Stem material, you can try dissolving the stem. 
×
×
  • Create New...