Jump to content

Recommended Posts

Posted

Hello

I hope everyone is s staying safe during time and has lots of time on their hands……. Purchased a Movado watch new it looks like a real Movado  watch with  the serial number, model number etc…… with one exception the buckle……. I  need  someone to point out if this is a fake watch, or take it back to the dealer…….. A few pics  for reference 

image.jpg

image.jpg

Posted
1 minute ago, Nucejoe said:

I expect a Swiss movement inside a genuine Movado, so I say a fake.

Regs

@Nucejoewhat is it that indicates to you that the movement in this one isn't swiss? What am I missing?

Posted
2 hours ago, honeybee50 said:

I  need  someone to point out if this is a fake watch, or take it back to the dealer……..

If you bought in a shop it's not you that have to prove it's fake, but the other way around. I think that just mentioning that and your next shop would the the police will make them refund your money. Counterfeiting and related dealings is a crime, not a matter of "consumer rights". 

That being said there are expert collectors forums around, you may want to post there with the back opened. And of course the authoritative word of an official dealer. 

Posted
1 minute ago, Marc said:

@Nucejoewhat is it that indicates to you that the movement in this one isn't swiss? What am I 

On the back plate is engraved Swiss quartz. 

I am not sure ref No gurantees originality.

Posted
Just now, Nucejoe said:

Swiss quartz doesn't means a movement is Swiss.

So are you saying that the wording "Swiss Quartz" means that the movement inside can't possibly be from Switzerland?

Posted
20 minutes ago, Nucejoe said:

Swiss quartz doesn't means a movement is Swiss.

As the OP pointed out, the etching on the case back is correct, but of course the one on the buckle is not. That is easy to verify for anyone from Internet pictures, e.g. on chrono24.com

Watches based on Swiss quartz mov.ts are easy to counterfeit when it comes to the mov.t, as it's immediately available and perhaps only the top plate needs to be re-worked.

 

Posted
1 minute ago, Marc said:

So are you saying that the wording "Swiss Quartz" means that the movement inside can't possibly be from Switzerland?

There are only a few Swiss quartz movement manufaturers, all branded, I know of no non branded one, makes no sense to make a movement when  quality ones are available to Swiss watchmakers. Based on which my answer to your question is yes.

Posted
3 minutes ago, jdm said:

Watches based on Swiss quartz mov.ts are easy to counterfeit when it comes to the mov.t, as it's immediately available and perhaps only the top plate needs to be re-worked.

This does't even say Swiss movement, it says Swiss quartz.

Posted
42 minutes ago, Nucejoe said:

This does't even say Swiss movement, it says Swiss quartz.

What I'm trying to explain is, it's correct that says that, because it's supposedly a Movado from their economy range, made in China with Swiss parts - namely the Ronda the mov.t. There are probably more fakes than genuine of these around, and all could be coming out of the same factory.. Check listing: https://www.ebay.com/p/1323810638

 

s-l1600.thumb.jpg.333ba73be9ae570c1a17ee3d2752769d.jpg

 

  • Thanks 1
Posted

Quartz purifcation process outputs a range of purified quartz. A fake gets the cheaper lower grade. 

Fake movement don't grow on trees, its only the low end of the technology.

Posted

If we are to go purely by the case back markings then there would certainly appear to be plenty of "fakes" out there, and in the hands of some perfectly reputable dealers....

31534767325.thumb.jpg.44e46a6b1a58bf1c97b6d08352581e47.jpg

91180041_Screenshot2022-01-21at08-59-30MovadoBlackYellowGoldPlatedStainlessSteelMuseumMO011346002MensWristwatch3....png.e99b6dde9d3a826cb18a8d099e450b99.png

.....these from just a couple of minutes of googlefoo.

Personally I would need to see what is underneath the case back before I could confidently declare something genuine or counterfeit, and even then only after verifying what the real deal should have under the hood so to speak.

In response to the OP's query I would say that the pics don't really provide enough information to come to a qualified conclusion, although the wording on the buckle is somewhat suspect and would warrant further investigation (open the watch up and have a proper look), preferably in the presence of the vendor.

 

 

  • Like 1
Posted
7 hours ago, Marc said:

Personally I would need to see what is underneath the case back before I could confidently declare something genuine or counterfeit, and even then only after verifying what the real deal should have under the hood so to speak.

Right, so what should be the comparison item in this case? If the picture I have posted above is of a genuine one then the standard to which there are build is so low to cast doubt on everything. 

Really a purchase I would recommend anyone to avoid considering its absurd price. 

Posted
22 minutes ago, jdm said:

If the picture I have posted above is of a genuine one then the standard to which there are build is so low to cast doubt on everything.

I 100% agree with you, my understanding from your earlier post was that it was an example of a fake, I may have misunderstood.

I would urge any potential buyer to do the level of research that they feel is appropriate to the purchase prior to parting with their money. If I was presented with the example that you posted earlier I would have to come to one of two possible conclusions; either it's a fake, or if it is genuine then it is so over priced as to be laughable and I would move on.

If the contents of the case had proven a bit more credible though then I may still have wanted to do some some more investigation in order to satisfy myself that it was the real deal. This could be as simple as a close inspection with a loupe, or a more in depth check with the manufacturer and the dealer regarding authenticity, which ever provided me with the level of confidence that I was happy with, and that's a highly subjective judgement that is unique to each of us.

The point that I was making earlier though was that I think that we should be a bit more careful about categorically declaring something a fake without sufficient evidence to back up our assertions. I can't tell from the submitted photos in the OP's post whether it's fake or genuine which is why I asked @Nucejoe to elaborate on how he came to his conclusion, afterall if there is some clue that I have missed then I would be glad of the education.

Your own explanation regarding the possibility of a genuine item from a budget range from Movado (therefore cheap but not fake) made sense and provided a possible alternative interpretation of the case back text, demonstrating the potential pitfalls of jumping to one side or other of the argument without sufficient data.

Like I said I would need more information regarding both the content of the watch case in question, and what should be in there, before I could even begin to have any confidence in my conclusion.

  • Like 1
Posted

I think the movement Jdm shows is Asian made and cheaper than genuine Swiss Ronda. 

 The quartz in it is like 99.8% pure and better quality quartz might be 99.89 pure, both quartz are purified by Swiss technology and made in Switzerland, with considerable price diference ofcourse. 

  its always a fraction of a percent purer , purity never gets to 100% .

 Most its other parts are also made in Asia, jdm's good choice of words to call economy range if he thinks lower grade as well, ie; lower grade quartz and slightly inferior electronic board maunfaturing process. 

Asian made Swiss quartz movements go in lower quality case, dial, strap, buckle.... etc. 

 

 

 

 

Posted

Good morning

Reading the reviews on the topic real or fake Movado, I am curious to know is this a cheap version for this watch ? What does the movement look like  compared to an authentic model…".. would anyone out there like to post  a real or authentic model for sake of comparison……..   I am going to take off the caseback to see what type movement is n the watch that I have…..

I did contact Movado , they have a secondary company to do all evaluations and to work on their product. (Watches)

Thanks

Posted

The movement jdm showed the picture of, says one jewel and the jewel is real tiny. Low grade Asian in other words fake.

Google ronda 715 and find a movement with similare layout which says five jewels which are big too. good grade Swiss in other words real. 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • After another long hiatus (while waiting for truing calipers to arrive), I’ve made some more progress. TRUING IN THE FLAT I was able to use the calipers I purchased to true the wheel in the flat. There’s still a very slight eccentricity in the round, but I’m going to leave it as is. It doesn’t wobble any more and I’m happy with that. Thanks for the tool recommendation @mbwatch. It worked well, though I must say it takes a delicate touch to get the balance between the calipers. Also, my calipers effectively have four different variations based on the orientation of the arms (2 sides, 2 orientations each). Some are more tapered than others, though to what end, I can’t quite tell. My first thought was that flipping them over yields arms that can be used for poising. They are K&D horizontal calipers, btw. OSCILLATION TEST @nevenbekriev @JohnR725 After truing the wheel in the flat, I carefully remounted the hairspring and did your oscillation test. Balance wheel mounted to balance cock, no pallet fork, rotate balance wheel 180 degrees, let it go, and time+count the oscillations. Results as follows for dial down orientation: Duration: 1m 15sec (to full stop) # of oscillations: About 125, though the amplitude of the oscillations decreased significantly, as one might expect I should redo the test in at least two other orientations…Forgot to do that. 🙂  In general, it’s safe to say this watch has a pretty low amplitude, likely for a variety of reasons. I haven’t oiled the balance jewels FWIW…I should probably do that, but I really don’t want to keep disassembling and reassembling the balance. Is it possible to oil those jewels (top and bottom) by just removing the capstones and putting in a tiny amount of oil, with balance in place? I can see how having the pivot in the jewel hole could change how capillary action works, and thus might pull more oil in than desired. However, those capillary forces will be in effect anyway once the balance is inserted. PRACTICE MOVEMENTS @JohnR725 I agree with your sentiment about using practice movements wholeheartedly, and I’ve done that to some degree. The watch I’m currently repairing is for a friend, and she was willing to have me treat it as a “learn-by-doing experience.” With that said,, I probably should have purchased a few more “beaters” before getting to something where I don’t want to muck things up. I’ve still got a couple of those on the bench that I used as donors, and I’ll try to rehabilitate them.
    • Hi, this is the first place I found when looking for advice so I hope someone could advise me.  Im completely new to touching watches but I’ve always wondered how they work.  I’ve bought a cheap movement, an ETA replica to take apart and rebuild.  Im thinking I’ll need some screwdrivers, tweezers, movement holder and a loop? My goal is just to have a go first and see if I enjoy it enough before buying more tools.  Do I buy cheap tools for now and get better quality tools later if I enjoy it like I think I will? or will the cheap tools be a pain and take some of the fun out of it?  With quality tools being relatively expensive I’m unsure what to buy.    Any advice would be greatly appreciated!
    • Yeah I have seen 44-56 documented for Elgin 18 size elsewhere. I have the style of gauge that's like a set of feeler gauges and I never noticed before today it is faintly stamped "Elgin". Pictured is the way I have been measuring. I am going to go to a larger jewel than the 42 that had been in there. I recently won an auction on a big set of Fitrite jewels all in the little bottles, to discover that the what's actually in the bottles bears no relation to the chart of sizes printed on the box. In most cases it seems to be all mixed so in fact I have about 24 little bottles and thousands of assorted jewels of all diameters and lengths, which is better than nothing. But since I don't have a micrometer with a table, measuring for the exact diameter will be a big job. Instead I will test a lot of them in the fork slot the same way I measure with the gauge. But this is still the next thing. I have to get the escapement to unlock first.
    • it would be nice to have the exact model of the watch the or a picture so we can see exactly what you're talking about. this is because the definition of Swiss watch could be a variety of things and it be helpful if we could see exactly the watch your dealing with then in professional watch repair at least some professionals they do pre-cleaned watches. In other words the hands and dial come off and the entire movement assembled goes through a cleaning machine sometimes I think a shorter bath perhaps so everything is nice and clean for disassembly makes it easier to look for problems. Then other professionals don't like pre-cleaning because it basically obliterates the scene of the crime. Especially when dealing with vintage watches where you're looking for metal filings and problems that may visually go away with cleaning. Then usually super sticky lubrication isn't really a problem for disassembly and typically shouldn't be a problem on a pallet fork bridge because there shouldn't be any lubrication on the bridge at all as you typically do not oil the pallet fork pivots.  
    • A few things you should find out before you can mske a decision of what to do. As Richard said, what is the crown and all of the crown components made of . Then also the stem .  The crown looks to have a steel washer that retains a gasket. So be careful with what chemicals you use to dissolve any stem adhesives or the use of heat. You might swell or melt the gasket unless you are prepared to change that also . The steel washer maybe reactive to alum. Something I've just used to dissolve a broken screw from a plate. First drilled out the centre of the screw with a 0.5mm carbide . Dipped only the section that held the broken screw in Rustins rust remover. This is 40 % phosphoric acid. 3 days and the screw remains were completely dissolved, no trace of steel in the brass threads. A black puddle left in the solution.
×
×
  • Create New...