Jump to content

Pusher stem for a Vulcain Cricket


Recommended Posts

Been restoring another cricket and discovered that the pusher stem seems to be damaged, so I decided to turn a new one.  Notice that I made the each end a little longer than the reference piece.  I can shave it down if necessary.  I made the narrow end on the right a little bit larger in diameter than the sample because I noticed that the pusher button was not seating well (still loose).

 

2021-12-06 11_02_50-IMG_7559.JPG ‎- Photos.png

  • Like 3
  • Thanks 1
Link to comment
Share on other sites

  • 1 month later...
1 hour ago, maclerche said:

Great job... Im a big fan of Vulcain. Did you service your Vulcain's by yourself?

Best regards 

Henry

Yes, three of them.  The fourth I bought on Ebay in running condition.  I am quite comfortable with the Cricket now!

One of them had a pretty much destroyed dial, so I had it refinished--it is the watch I wear most often.

Oh, and one of them which I am finishing now came to me in pieces and some of those pieces were rusted, so it was an ordeal finding parts (and making parts).  I will be happy when it is on my arm...just waiting for a crystal to arrive--maybe today!!!

Edited by LittleWatchShop
  • Like 1
Link to comment
Share on other sites

44 minutes ago, markr said:

Who refinished the dial for you?  Do you mind telling what it cost?

See attached.  They are slow as molasses, but so is Kirk Rich.  I am waiting for another dial to come from International that I can do a 1:1 comparison with KR (because they are the same dial).

This was for dial and hands.

2022-02-03 13_13_21-International dial receipt.pdf - Foxit PhantomPDF.png

Edited by LittleWatchShop
  • Thanks 1
Link to comment
Share on other sites

  • 2 weeks later...
On 12/6/2021 at 7:10 PM, LittleWatchShop said:

Been restoring another cricket and discovered that the pusher stem seems to be damaged, so I decided to turn a new one.  Notice that I made the each end a little longer than the reference piece.  I can shave it down if necessary.  I made the narrow end on the right a little bit larger in diameter than the sample because I noticed that the pusher button was not seating well (still loose).

 

2021-12-06 11_02_50-IMG_7559.JPG ‎- Photos.png

Is it possible to find a replacement pusher for an older cricket.  I have a query on this for a ref. 303005. Did you look for one? Thanks

Link to comment
Share on other sites

  • 8 months later...
On 2/14/2022 at 1:34 AM, maclerche said:

Is it possible to find a replacement pusher for an older cricket.  I have a query on this for a ref. 303005. Did you look for one? Thanks

They show up once in a while on the fleaBay and a few other parts suppliers...

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



×
×
  • Create New...