Jump to content

Recommended Posts

Anyone have an idea what this tool is? It came in a batch with some hairspring tools I recently bought so I'm hoping it's something similar. The grid in the background is 1cm squares,  for scale. The "MA" is stamped on some of the other tools so I'm assuming they're the initials of a one time owner.

IMG_0014.thumb.JPG.7419a8480baf93b98efa43a57cbafcf7.JPGIMG_0013.thumb.JPG.dd2f7181d9ab3094b5be1dbb9fa7fb10.JPG

Link to comment
Share on other sites

42 minutes ago, watchweasol said:

Hi  The normal ones are round with a series of holes round the perimeter and have a "V" slot on them to accommodate the balance and roller. Yours I think is just another variation.

I've got one of those (made by Slick but sold by Bergeon /Horotec)... I've understand now, the square part is for the impulse jewel so you can work on the other side of the balance staff. Cheers @watchweasol

Link to comment
Share on other sites

5 minutes ago, nickelsilver said:

I have a couple of blocks exactly like in the OP, not really sure if it has a specific purpose, but they're handy!

That was me too, cheers, definitely keeping it for future use.

What about these 3 tweezers? The one on the left is unbranded, The furthest one away is by WIT (stamped E) and the nearest by Bergeon (slightly bent out of shape and stamped 3). The second picture is the one on the left upside down.

IMG_0019.thumb.JPG.f7be452203ef0c6a8c918f8980f60c21.JPGIMG_0020.thumb.JPG.4ca76ece7612531d8c05cce0b3f2e5da.JPG

Link to comment
Share on other sites

Wow, I can only guess that the lower right one might be for holding pallet forks but those usually have a sliding clamp. The one with the pin probably for pressing out a pin; but all look quite specialized, likely for production. Never seen any exactly the same and I have hundreds of tweezers.

  • Thanks 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • That's the right technique Mal 👍 If you are ok with a loupe ( which I'm not ) then pick up the dial in your left hand and make a tripod holder out of 3 fingers and then exactly how Mal and me described with your right hand, press and flick out the stem at the same time. You need three fingers to do this, i use my ring ring finger , sounds like mal uses his little finger, just whatever you feel comfortable with. The key point and dangerous side to this is the tweezers or driver slipping off the release screw. Stablise your left arm by resting your elbow on your bench, so that you can hold the movement horizontally flat, use a x5 loupe to view  and good light so you can see well and have a good tight fitting screwdriver to push the release down. Or as suggested a pusher mounted solid upside-down somewhere then all you need to do is push your movement up to it. I'll rig something up in a bit to show you what i mean. Something like this, but tbh its better to just learn to do with your fingers.
    • Thanks Michael, shes a real soldier, it would take a tank to knock her off her feet.  Shes surprised even me and i knew she was a tough cookie.  Good for you Michael, you keep at it. I've been reading your posts re. your watchroom they're inspiring and it doesn't matter how long it takes you to get there its about the journey. Rome wasn't built in a day, our watchcaves are our solitudes, our own little empires where we can shut ourselves away from the crap that goes on around us in the world. I look forward to seeing you progress, I have my own ideas how i like to do things. But in answer to your questions on that thread, just let your workspace evolve around you and how you work. You wont figure it out straight away but you will know when to change it and when to leave it alone. But most of all just enjoy it.
    • That can be tricky. Sometimes I hold the movement from the edges in left hand and with right hand I push the release with tweezers and simultaneously pull the stem out with right hand pinky or something. 
    • I see what you mean. I must admit I’m not entirely comfortable with that but I can’t see a better method than what you suggest. I’d like to see something like this mirror with a short spike: https://www.cousinsuk.com/product/mirror-for-observing-movements Place it on, push the spike on the post with one hand and release the stem with the other hand. Minor problem, it doesn’t exist.
    • Hope you mum keeps on mending. I was adamant that I was going to get myself going after my stroke. I was only 52. I still have a lot of life left to live. Some people give up. Some people don't let it beat them. Your mum sounds like one of the winners. 👍
×
×
  • Create New...