Jump to content

To Rechrome or not to Rechrome. (by me) That is the question.


Michael1962

Recommended Posts

Everybody, would you take on the task of cleaning up some parts and then sending them away to get rechromed or would you make the set up yourself and rechrome them yourself?

The Hettich has some chromed parts which have been attacked by the battery goo. I can either take them to someone who chromes in Geelong or set up the gear to do it myself. The only thing I don't know where to get is nichrome wire or a 5V, 1A power source. If you have a look here, this seems to make it look fairly easy with really promising looking results. What I am not sure of is the level of preparation that may be required as there is some fairly heavy corrosion on the parts from the battery acid.

Anybody have any suggestions?

Edited by Michael1962
Link to comment
Share on other sites

  • Michael1962 changed the title to To Rechrome or not to Rechrome. (by me) That is the question.

Nickel plating is possible at home, chrome plating is not really possible at home.

If you want it chrome plated you need to take it to a professional.

The solution in that beaker looks like a nickle salt, not chrome, reading the description it even says nickel plated.

If you want to do nickel plating look for a local jewellery supply store they will sell nickel ingots used in plating. I did it a while back and using HCL made nickel chloride, but you can use vinegar and make nickel acetate which is safer.

If you do want to try home nickel plating practice on something you don't care about first, if you get it wrong you will end up with a very rough surface. Also read up on the safety required too.

Link to comment
Share on other sites

Chroming chemicals are pretty regulated here in the US. Heavy metals and associated toxicity. Difficult to dispose of the byproducts. The last time I had some (car) parts rechromed more than a decade ago, it was a real struggle to find anyone to touch it. That was in Texas, hardly an environmental utopia... Australia may very well be a different story.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hello forum, I have just joined the forum and I believe it is the done thing to introduce myself.  I am based in Surrey UK and am essentially a complete novice at watch repair.  Fairly life long interest in watches, starting from not being allowed one as a child as I kept taking them apart… After watching a you tube video of a watch service, I thought to myself “I could do that…”. Well I got myself a Seiko 7002 dive watch that was a non runner. Striped cleaned and reassembled. With much blaming of tools, dropped parts and feeling out of my depth I got it working again. I built my own pressure tester and it leaked like a sieve! fixed now though.    I’ve since done a few 7002’s and an NH35A with mostly success. But now I’m left with quite a few working movements and no budget for cases. Overall my lack of a timegrapher has really hampered things and efforts using phone apps have been disappointing.    I next moved to an ETA 2472, all went well until I snapped the stem after failure to find a suitable case for it. Alas replacements seem almost the price I paid for the movement! Hopefully I’ll stumble on a suitable one one day.   Currently working on a Smiths 512 pin pallet movement. All went well until the shock protection. My goodness they are tricky compared to all the others and now I’m down one shock spring. This was my first movement I’d done with no video or walkthrough or even manual for backup. So I was pretty pleased with my self, briefly.  Well, that’s me and my watch repair journey.    Rob    
    • Something odd is going on with email notifications. As I posted above with the screenshot, when I checked my notification settings I saw that somehow the option to send an email notification in addition to the browser notification was not selected, even though previously that had been working for me. So I selected the email option, in addition to the two top options of automatically following new content I post or reply to. I did not get an email notification for your post (I did get the browser notification), which I should have (it does show me as subscribed to this thread) and when I went to look again at my notification setting, the board software has again unchecked the email notification option (in addition to the two top automatically follow options). The below left is a screenshot of how it was setup after my last post and the right is how it was just now when I rechecked. For some reason the board is resetting this preference on its own.
    • I feel like I've achieved the next level up 😅 . First watch with homemade part installed ( setting lever ). FHF 73, not bad to work on, simple and sturdy, and part working perfectly.  An Avia and in time for this year's Olympics.  It has a teenage dial ( bit spotty ) 😅
    • We need to know the caliber. 
    • I am.  On my phone just using the bell symbol, I don't bother with email notifications.  Actually I  stopped receiving email notifications a long time ago, I  don't remember cancelling them. 
×
×
  • Create New...