Jump to content

Balance staff


Tore

Recommended Posts

Your question was already answered by Nickelsilver. I just want to add my comment before you spend 35€

Your watch, 19''' was produced with three different Staffs: you may want to remove your existing staff first to check which one to order.

BS4652    19    482    240       

BS4653    19    484    240    

BS4654    19    488    239

  • Like 1
  • Thanks 1
Link to comment
Share on other sites

4 hours ago, Poljot said:

Your watch, 19''' was produced with three different Staffs: you may want to remove your existing staff first to check which one to order.

always a good operating procedure before ordering a balance staff measure all the dimensions and compare if you can with the staff your ordering before you order. Then when you get the staff you also want to measure everything again to avoid unpleasant surprises down the road.

then what's weird site below has two identical watches for the same number which represents the ligne size and then there's a third one that's a little variation in the height? which is why you have three staff sizes apparently.

http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&0&2uswk&Revue_19

 

http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&0&2uswk&Revida_19

http://www.ranfft.de/cgi-bin/bidfun-db.cgi?10&ranfft&0&2uswk&Revue_19H5_6

 

 

  • Thanks 1
Link to comment
Share on other sites

5 hours ago, Tore said:

Thank you, The pivot is broken, but that is no problem now. BS4654 is with Inca, BS4553 is Ø145, but i wonder what 19 stands for?

 

In case your measured diameter will be Ø145, not Ø125, let me know and I will provide another part number for the staff (way less expensive than 35 EUR)

  • Like 1
Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hello and welcome from Leeds,England.  Ask away. 
    • What cutter are you using can you video the action 
    • Thank you for your introduction and welcome to this friendly forum. We all look forward to your contributions and continued involvement. 
    • if you're trying to keep track of conversations scattered all over the message board emails are an absolute must.   looking at the bell icon on the top of the page versus the emails today it looks like I got the correct amount of emails. So making some minor change based on the one of the images up above I started getting notifications again. But at times I still have a suspicion that something isn't quite right. I have some feeling that the message board may delay sending emails until something so seems to be a long delay between when you get your emails just a weird feeling things aren't quite right oh  and then even though I do seem to be getting emails I no longer get notifications of personal messages I don't find that out until I arrived at the message board where I'm pretty sure I used to get notifications of those two. So something is definitely changed on the message board. then for everyone not getting emails you do want to check your spam folder. I have found that sometimes were open up an email the system I use warns me that it thinks the email is evil and bad and I have no idea why he thinks some of the emails are and some are not. But this is actually the program I use not the email system which also has a mind of its own as to what it considers spam so you should always check your spam folder.
×
×
  • Create New...