Jump to content

A Nice Hamilton 978 Railroad Watch From 1915

WillFly

By WillFly
in Your Watch Collection

 Share

Recommended Posts

WillFly Distinguished Member

WillFly

Posted
Posted (edited)

This is my Hamilton 978, an early railroad-style watch from 1915. The face is nicely defined, with lovely minute markings. Like all RR-style watches it's crown and lever set. The movement is beautifully damaskeened - and I should have said "Railroad-style Watch" in my post heading because it's adjusted to 3 positions and not 5 - therefore not official railroad grade.

 

Hamilton%20978%201915%20face.JPG

 

Hamilton%20978%201915%20movement.JPG

Edited by WillFly
Link to comment
Share on other sites
WillFly Distinguished Member

WillFly

Posted
  • Author
Posted

About 2-3 years ago, I think, though whether from eBay or an online auction I can't remember. Probably an online auction. The 978 grade isn't as well known as the 992B. It's interesting that it's lever set. I had a 925 that was also lever set and was an open face hunter movement - wound at 3 o'clock.

 

When lever setting was first introduced, it had a bit of a vogue with domestic purchasers and was probably also good enough, if not for railways, at least for urban tramways. From the state of mine, I suspect it was a domestic purchase.

 

I like lever set movements as you don't have to worry about a complicated winding stem for them that pulls out. Basically, you can wind them with a small screwdriver as the setting takes place elsewhere in the movement! Most of the pocket watch cases of that era had a space under the bezel for a lever to pull out, so they could be bought for either lever set or crown set movements.

 

I wish the days of walking into a shop, selecting a movement, and then selecting a case to house it, were still with us. What interesting watches we'd have!

Link to comment
Share on other sites
DJW Super WRT Addict

DJW

Posted
Posted

I wish the days of walking into a shop, selecting a movement, and then selecting a case to house it, were still with us. What interesting watches we'd have!

 

That's the basis of my business-(OK, maybe not walk into, but maybe Browse into :thumbsu: !)

Chose your movement

Chose your case

Chose your dial, hands, strap...etc.

 

I also have a website you can look at to see exactly what it is that I do....Just not sure if I should post a link here as it may be frowned upon!

 

Best regards,

Don

Link to comment
Share on other sites
ianmedium WRT Addict

ianmedium

Posted
Posted

That dial is in wonderful condition and I love the red counting the 5 minute segments as well as the complete 6 in the sub dial, just such a well thought out timekeeping dial.

It's interesting what you say about the cases of that era having provision of a cut out in case a lever set movement is used. My American Watch co. Cased Omega has that very cut out even though it is stem set and wind.

One thin I wish all those Hamilton's had though not practical, is a display back as the finish on them is second to none I feel.

A gorgeous piece,congratulations!

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • VWatchie
      Epilame / Fixodrop

      By VWatchie · Posted

      That's one beautiful timepiece! Love the big crown in proportion to the case. Perhaps a ladies' watch, but I don't think so. I have a "modern Ingersoll" watch, but it has nothing to do with the original brand (Miyota 9015 movement). Interesting synonym for synthetic oils! 😆 There is, of course, a limit to how large a volume of oil epilame can bind and hold in place. If the oleophobic effect is too strong then it can become a problem. I'm not sure where I heard or read it, but as I understand it, the active ingredient in a bottle of epilame is extremely small and more than 99% of the contents of the bottle is just a transfer agent. If the active ingredient becomes too concentrated, which it can become over time, or if the product is of poor quality, the oleophobic effect is amplified. This in turn causes the applied oil to look like a gummed-up ball on the surface of the treated part. If that happens, we know that the active ingredient has become too concentrated. What we want is for the oil to bind but not to the point where it is formed into an excessively round ball on the surface. The highlighted text in the patent that you refer to describes well the problem that can arise with too high a concentration of the active ingredient. However, I would be extremely surprised if the entire amount of oil leaves the treated surface as water on wax would. At present, I am convinced that the analogy between wax and water on the one hand and epilame and oil on the other is incorrect. Epilame is described as binding and that is also my absolute experience. Epilame probably has some repelling effect but that is not its main purpose and that is not how epilame is designed and works. The method of abrading the epilame treatment from the section of the pallet stones coming in contact with the escape wheel teeth seems after even more research to be well established, but if it actually works, if so how and why is beyond what I can currently understand. Perhaps it is just to do and trust that it is based on well-established experience. I am, after all, inclined to think so.
    • Chief
      Second hand watch market.

      By Chief · Posted

      Sorry to jump in here, but I didn't want to start a new thread when there's already one regarding the second hand watch market. Can anyone tell me what I should be looking at when buying watches from eBay? I see loads on there for quite cheap, but after reading this thread I'm guessing they're all garbage and not worth the time? I recently bought an old Elco watch for 99p, just to practice on. I'm also really fond of the look of Services watches and Smiths Empire watches. I keep seeing them listed for around 5 or 6 pounds. Are they not worth the time buying? I'm not looking to sell watches to make a profit. I just want to buy watches I like the look of and wear them, but I also don't want to buy things that are going to be impossible to find parts for, or that have already been abused by someone else and broken beyond repair. Any tips?
    • Endeavor
      Omega cal. 565 - low amplitude

      By Endeavor · Posted

      I tried the Moebius 9415 from any sensible amount, down to microscopic a drop (or "super minimalistic"); the size of droplet which makes you really wonder why one would/should apply anything at all? But to no avail, consistently a lower amplitude compared to my Dr.Tillwich 1-3. Of course, as John mentioned above, the Dr.Tillwich 1-3, just like the Moebius 9010, likes to go somewhere else. Since short however, I'm the (proud?) owner of a bottle of Moebius Fixodrop. Can't say that I'm a proud owner of the 9415. So far, I haven't seen or discovered the "magic" of the 9415. Meanwhile, Moebius 🤣 has my money though.........
    • Michael1962
      Without Our Forum

      By Michael1962 · Posted

      I used to be quite active on The Lotus Forum when I owned my Esprit. I was there for so long, Bibs asked me to be a moderator. I'm not sure how long I did that for, but I think I turned into the second longest serving moderator. When I 'handed back my keys', Bibs made me a Full Forum Member. Normally this is a paid membership. My reward I suppose for helping out for many years. Bibs (forum owner) is quite active on there and if I am not wrong, don't quote me in other words, I think he once said that the money from memberships didn't cover the running cost. He adds money himself to keep it going. Does Mark have any sort of subscription scheme on here? I'll admit that I never paid to be a member on TLF. I should have. I never did. I agree that it would be a good idea that there is some sort of contingency plan for this forum. I intend on becoming more active on here. Life has just been getting in the way recently. I enrolled on Mark's watch course and was keenly doing that, but even that has had to take a back seat for a while. I am looking forward to getting back into that and also starting to do work on the clocks that I have been amassing. To do that successfully, I see myself needing to lean on the other members here. If for whatever reason this forum was to close, I think a great many of us would struggle.
    • Waggy
      Second hand watch market.

      By Waggy · Posted

      I think we are about there, if there were still lots out there then the cost of a watch from 5 years ago would be around the same as it is now (allowing for inflation). Given that the price has gone up several times over we can only assume that supply cannot keep up with demand so we must be at or past peak supply, especially if the trend continues. I see even places like Australia, Ukraine and even South America are selling watches on eBay, picking over their stocks, mixed in with fakes and Frankenwatches etc.
×
×
  • Create New...