Jump to content

Lighter Fluid


Recommended Posts

Hi Rogart, recently I started using Fast Panel Wipe as used in paint spray shops. Here is the brand that I am using, I purchase it from a local spray shop supply shop at a cost £15.00 for 5L. There are two types, a fast and a slow, it is the fast that you are looking for.

http://www.ebay.co.uk/itm/U-pol-System-20-Fast-Panel-Wipe-Degreaser-5L-UPOL-Panelwipe-/381087467644?pt=LH_DefaultDomain_3&hash=item58ba95487c

I ran a test with Ronson lighter fuel, Fast Panel Wipe and Bartoline Turpentine Substitute (white spirit). I placed one drop of each on a clean sheet of glass to see what residue is left after evaporation. I was astounded at the result, white spirit although slow to evaporate, left no visible residue at all. Lighter fuel and fast panel wipe took the same time to evaporate and left exactly the same faintest ring of residue.

Link to comment
Share on other sites

My understanding is that "Zippo lighter fluid", "Ronsonol" etc. are pretty much the same as "naphtha", which in turn is a range of light petroleum distillates. No two brands are exactly the same, so before using it for cleaning you should do the glass test (put small amount on glass and let it evaporate) and check for residue.

 

(The Swedish equivalents are "Kemiskt ren bensin", "Heptan", "Rengöringsbensin" & "Industribensin". "Lacknafta" is pretty close, but is more fatty and evaporates slower.)

Edited by Rob
  • Like 1
Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Just installed it on my iPhone (my only iOS device) and it appears to be intact and functional. I may have to go out and buy myself an ipad just for this app.
    • I have two Seitz sets, one ancient (with the 3mm anvils) and one just old (with 4mm anvils) plus a collection of spare pushers of assorted vintage. Not one of them is marked with it's size. Something which I have found very irritating when I have been using the tool and not returning pushers to their correct place in the tray every time as it means that I have to get the calipers out and measure them. These were bought as sets and collectively I have over 100 pushers so it would seem highly unlikely (if not inconceivable) that they are all cheap knock offs, especially as they are old enough to pre-date the prevalence of the Chinese knock off industry (at least as applied to watch making tools). I therefore believe them to be original Seitz parts. And there is no numbering. The shape of the bottom of the pump pushers is the same as your photo. The only thing that may not be the same is that the slotted insert (looks like a screw but is in fact a bayonet) should be brass. Yours looks the same colour as the steel but that could just be the lighting.
    • The original database is available on iOS devices here: https://apps.apple.com/fi/app/ranfft-watch-movements-archive/id6502008939
    • I no longer have my set so I can't help anymore sorry. Many on here have the set as its a must have tool for watch making/ repair.
    • It needs to be stirred before use and that makes it feel a lot thinner than when in the bottle. Does it feel as thin as 9010 after stirring it? I guess not! Yes, it's strange! I don't know, but if it is on impact it would make sense.
×
×
  • Create New...