Jump to content

Recommended Posts

Posted (edited)

I'll start.  But first, the backstory: what I didn't know beforehand was that one of my daughters "borrowed" my *brass* tweezers to apply some stickers, and put them back before I knew about it. I found that out later.

So there I am, bit of sinus trouble making me groggy, working on a practice movement to take my mind off it.  I'm unscrewing the balance bridge, and I go to grab the screw with the tweezers and put it in my tray. I hold it over the tray and let go, but it stays on the tweezer tip.  I think "That's not good".  So I put the screw and the tweezers on my demagnetizer and hit the switch. I lift the screw and drop it in the tray. And as I watch myself lifting *brass* tweezers off a demagnetizer, I realize how tired I am and go to bed (resolving to figure out why the screw stuck sometime later).

Anyone else have a funny watch repair-related story to tell?

Edited by KarlvonKoln
Edited for misspelling
  • Haha 1
Posted
2 hours ago, KarlvonKoln said:

And as I watch myself lifting *brass* tweezers off a demagnetizer, I realize how tired I am and go to bed (resolving to figure out why the screw stuck sometime later).

Science is demonstrated by experiments, so nothing is wrong repeating these sometime. The other day I found that my brass tweezers reject small screws, even after being demagnetized (the tweezers). I only went far enough to learn that brass is not actually totally amagnetic, did not try to demag the screws and just moved on.

  • Like 1
Posted

I gave a used quartz watch to our houseman, couple of days and he comes complaining he doesn't want it for it looses time dispite him winding it everyday.

 

  • Haha 1
Posted

I haven't posted in a bit so:

The LCD wristwatch was a new thing.  When was that?  '79, '80, not really certain.  I purchased my first one, a Seiko in '81.  Lifetime ago...  I was pulling night watch on the fall back from daylight saving time to standard.  Remember the rules said to set it back at 0200.

It was 0300 when I heard a shout from the desk sergeant who proclaimed his watch had died.  I look at it and saw the 00:00 on the display.  It seems he did not know how to set the watch so at 0200 took the back off and removed the cell for an hour then put it back in thinking the timepiece would stop for an hour and then display the correct time.

Armitron as I recall.  I bailed him out, of course.

  • Like 1
  • Haha 2
  • 4 weeks later...
Posted

It's not a story of repairing, and its not a watch but a clock! Tried to escape from me, but I caught it, to make my life more difficult it tried to disappear in pieces. We had heavy wind today and my clock was placed on the window sill, seems it teamed up with the curtain and with a little help it went trough the window. I managed to collect every piece with the help of a ladder and even though the case suffered a bit it is still going. ? ?

  • Sad 1
  • 2 months later...
Posted

Thanks again, my daughters.  So apparently one of my daughters has a little prism-like kaleidoscope toy, which gives one "insect vision", and also looks a heck of a lot like my black loupe.  So guess where she leaves it laying about, just for giggles.
If you guessed "On my workbench", you win the prize.  Sat down to look into works of another daughter's little quartz watch, took off the back, grabbed the loupe, and saw about TWENTY BATTERIES back there!!!  Recoiled a little, and looked at the "loupe" and had to laugh.  Yep, she got me good.

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Sounds like you've either got a short somewhere or excess friction that's draining the battery. Are both insulators still under the battery.
    • I have only made screws down to M1 & 14BA & I had trouble getting the slot in the centre of the head so I made a jig to help me be more accurate when cutting the slot, here is my video.  
    • I would repeat what @nickelsilver says, and even more. I have at leas 10 old thread plates and I have never seen one that will cut like a normal die. I don't know if they are completely worn or have never been sharp enough, but I find them completely useless. And, for the new Indian ones, I have heard only bad things. For sure, if one tries to cut more thread on a winding stem, this hole of the plate is ruined. Further more, I have bad experience with all watch size thread dies that I could buy from the available machine  tool shops here. They could not cut normal thread even on brass rod. The size was significantly smaller and the pitch is like it should be for the claimed size... The thread shape was bad too. I will explain how I do threads. I use lathe that can cut threads and thus I can prepare perfect taps. I use milling attachment instead cutter in the tool post and so I can cut thread even on hardened rod. But I prefer to harden the rod after thread cutting and temper it only to light color change as to have the maximum hardness. Then I make a tap out of it by grinding. I prepare my dies for screw thread cutting with the taps I have prepared as described. In watchmaking, dies exist and are often used that are not cutting, but rather forming the thread. They are like nuts and don't have cutting holes and edges. This kind of dies I prepare and use. You will need soft steel plate , drill a hole in it, then cut thread, then make chamfer on one side, repeat the thread, harden. You can temper just a little or leave untempered, depending of the steel You use. Using such die is with soft steel rod (or completely annealed). Good oil is to be generously applied. The rod has to be with smaller diam than the thread size (about 0.8 - 0.9 x ), the diam is better determined by tries. The rod elongates by the thread forming too. When I have to make screws from harder material like SS, I just cut them on the lathe. You screw needs hardening and tempering to be finished as real screw.  
    • You could make a guide/jig. Cut a slot in a piece of metal approx the same thickness as the screw head, then drill a hole (screw head diameter) in that slot.
    • Tried a SR920W and its completely dead after 3 weeks 🤷‍♂️ 
×
×
  • Create New...