gary17 Posted June 19, 2020 Share Posted June 19, 2020 Hey Why won't this movement come out. Stems out. Two gold rings are off. But it won't come out. And I have not noticed this other gold ring before. Cannot find part on work sheet either. I have opened this twice before and not noticed this washer or ring Cheers Gary Link to comment Share on other sites More sharing options...
Nucejoe Posted June 19, 2020 Share Posted June 19, 2020 Turn the movement like 90degrees, forgot if clock or anti clock. 1 Link to comment Share on other sites More sharing options...
rodabod Posted June 19, 2020 Share Posted June 19, 2020 Assuming this is a front-loader, did you return the remains of the stem back to setting position before rotating the movement? Link to comment Share on other sites More sharing options...
gary17 Posted June 19, 2020 Author Share Posted June 19, 2020 Hey rod No I did not return the stem. I turned that gold shim until it became loose which was nice. Only problem now is. When watch all back together the winding stems do not seem to meet. And they did when I srarted. DOH Not so cheerful Gary Link to comment Share on other sites More sharing options...
JohnR725 Posted June 20, 2020 Share Posted June 20, 2020 On 6/19/2020 at 12:31 PM, gary17 said: Why won't this movement come out. Stems out. Two gold rings are off. in the picture there appears to be a gold ring? You need to rotate this one it's used to lock the movement in place. Link to comment Share on other sites More sharing options...
Recommended Posts