Jump to content

How Would You Sort Out This Case?

jnash

By jnash
in Watch Repairs Help & Advice

 Share

Recommended Posts

BlakeL WRT Addict

BlakeL

Posted
Posted (edited)

I soaked some of the rusty tools I bought including the tweezers recently in vinegar and a little salt and it got off most of the surface rust.  They were not as bad as that case but I think it worked out well after some #1 and #0000 steel wool.

 

EDIT: I also neutralized the vinegar with a baking soda/water soak before using the steel wool.

 

DSC02693.JPG

Edited by BlakeL
Link to comment
Share on other sites
steveorval Watch Enthusiast

steveorval

Posted
Posted

hi j, i always soak my things like that in wd40 or similar for maybe looking at yours for about 2 or 3 days changing it as necessary and then finishing off with the wire wool, it dont look like you will damage any plating, come back and show us what it comes out like, could be interesting

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted (edited)

I am not sure what it's called in english . But something with Oxalic acid in . I used beatroot juice once . Black tea would do also . it will naturalize the rust and make it black . The rust particles will fall off .

Edited by rogart63
Link to comment
Share on other sites
Geo Distinguished Member

Geo

Posted
Posted

This is not something I have tackled in horology, but I would have thought there were plenty of rust proprietary rust removing products that would do the job. Once you have pickled the rust out of the case, it would require a lot of power and hand work to get (if possible) a smooth finish on the inside and outside of the case before any playing could be applied.

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      Chinese clone demagnetizers

      By Neverenoughwatches · Posted

      Maybe you had a bad one H, the cheap blue one i use has been fine for nearly 3 years now. It demags enough to stop the tiniest of screws sticking to the carbon steel tweezers i use. If it were to fail at some point in the future i very  probably would go up a level of device just because. 
    • tomh207
      Chinese clone demagnetizers

      By tomh207 · Posted

      Lot of “industrial “ de magnifiers on Aliexpress  https://www.aliexpress.com/item/1005004699640024.html?src=google&src=google&albch=shopping&acnt=708-803-3821&slnk=&plac=&mtctp=&albbt=Google_7_shopping&albagn=888888&isSmbAutoCall=false&needSmbHouyi=false&albcp=17858129175&albag=&trgt=&crea=en1005004699640024&netw=x&device=c&albpg=&albpd=en1005004699640024&gad_source=1&gclid=CjwKCAjwo6GyBhBwEiwAzQTmcxIEVpMt1vFIKQyfjVwT95zrBsOi5dt-GgFOmLamBcMcu4tO7CfaaxoChnEQAvD_BwE&gclsrc=aw.ds&aff_fcid=b7140f118e144db7876d074872aec9cb-1716029308364-08531-UneMJZVf&aff_fsk=UneMJZVf&aff_platform=aaf&sk=UneMJZVf&aff_trace_key=b7140f118e144db7876d074872aec9cb-1716029308364-08531-UneMJZVf&terminal_id=6b7c60e41b044cb39d1431f62cda0958&afSmartRedirect=y   a hard drive wiper/degauser would also be worth looking at.   Tom
    • VWatchie
      Chinese clone demagnetizers

      By VWatchie · Posted

      Unfortunately yes! Magnetism can wreak havoc on a mechanical watch movement if the balance hairspring becomes magnetised. The cheap blue Chinese demagnetise-rs are useless if you feed them the wrong voltage (> 110 V), and even so, they don't work very well. The one I got when I was new worked so poorly that it drove me nuts. Eventually, I was lucky to get a Greiner Magnomatic for a little money. It's an amazing tool that can be trusted to do its job perfectly in seconds. A new one comes with a price tag of  £885 excluding tax and shipping, and if you think that's a bit steep (I believe most of us would) and can't find a used one I'd go with @Jon's recommendation.
    • Neverenoughwatches
      Chinese clone demagnetizers

      By Neverenoughwatches · Posted

      Yep Mike , i use exactly the same gauge for it.
    • Neverenoughwatches
      AS 554 from 1930

      By Neverenoughwatches · Posted

      You definitely pick up different names from different people of all ages from everywhere. Like learning different dialects of the same language. Its all part of the learning curve of any trade.  Both those two terms describe to me perfectly that they are one and the same. After a couple of years of knowledge you can figure out what is being talked about. There are times that i get caught out with something i haven't encountered before. 
×
×
  • Create New...