Jump to content

KIF Satellor shock system


Recommended Posts

I am trying to replace a KIF top block on a balance cock. The part is 3-3559. But this part is obsolete. Is there a suitable alternative that could be used and if so how do I go about determining the correct part. I look forward to your responses. Many thanks.

Link to comment
Share on other sites

Maybe you could find a donor watch. I saw that voumard movements have Kif satellor spring . That i have a few lying around. BUt if they use the complete upper top block? 

What movement should it be for . Maybe easier to find a donor movement? 

Edited by rogart63
Link to comment
Share on other sites

 

1 hour ago, JimXgates said:

Thanks Rogart 63 and Nucejoe - its for a Record 652. I haven't checked julesborel but will do now. thanks for the info.

Thought it was a Record 652 . When seaching for KIF 3-3359 that movement came up . Nothing on Record on Jules  Borel  i am afraid. Do you need the complete upper bloc or just the spring? The spring you can buy on Cousinsuk. 

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • So I checked with my friendly local lab supplier and they can supply the following in 2.5 lt bottles: Tetrachloroethylene (B-Dip) - approx £65 Trichloroethylene (one-dip) - approx £43 n-Heptane 99% (Essence of Renata) - approx £35 Hexane - approx £45 I can't import or buy locally the 'real' products, hence the raw chemicals above. What do you think would be my best option? I'm edging towards Trichloroethylene - I know there are greater health risks, but given the very small quantities used for each treatment and 99.99% of the time it will be sealed in a jar, I think any risk is vanishingly small? This is mainly due to its assumed superior cleaning properties, or from the experience of this group, is the extra cleaning noticeable compared to its safer alternatives?
    • Unfortunately after much investigation, apparently the coil has been discontinued! Shall I get my service guy to try the solder or the conductive paint? 🎨 Final recommendation please🙏
    • Here are the pics of the bridge. Looks correct, but as soon as I screw on the rotor, the watch stops. Video here: https://1drv.ms/v/s!ArG5E62RGctxjokY5ws85BzuJLVakA   Pics. Might have figured it out. I have been working on this watch for a while and since I got it as a non runner in a terrible shape, there was no guarantee that parts were proper. I think the main screw that was used on the rotor was too long, so it was stopping the main train. As soon as I fished out a much shorter and larger headed screw, things were good again. Please celebrate with me.  
    • One-dip or naphtha should be safe, but are you sure it isn't magnetized?  I would also check that.  Although, if that balance is from an Elgin 760 0r 761, I would think it would have a hairspring of non-magnetic alloy.
    • Hi, Is there a spell check function available when you are posting ? Regards CJ
×
×
  • Create New...