-
Recently Browsing
- No registered users viewing this page.
-
Topics
-
Posts
-
By RichardHarris123 · Posted
Not sure but seems like a good idea. Obviously be careful not to remove too much. -
I just got this ladies Omega cal 684. The problem is the snap on case back is very hard to remove. Each time has taken me about 5 mins with my case back tool, and after a struggle, it pinged off about half a metre in the air. I cleaned and examined the parts, all looks in good condition, with no damage and nothing bent. So I tried again - 5 mins and PING. As the back is only 19mm diameter there's not as much flex as on a larger movement. I'm thinking of putting the back in my mini chuck, in the drill, and run round the inner edge with a fine file or wet and dry. Thoughts? The weapon of choice : A good idea ?
-
New member, just saying Hi, and now busy finding my feet here. All the best, Nick
-
Doesn’t really work for this, really it needs to be an invite only platform with good moderation. Full disclosure I spent a fair amount of my career as an IT/Network security consultant and am very touchy about what I may release on ‘tinterwebs. Tom
-
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.