Jump to content

gedwards

gedwards

By gedwards
in Introduce Yourself Here

 Share

Recommended Posts

gedwards New Member

gedwards

Posted
Posted

I probably should have introduced myself first, Sorry!

My name is Glenn Edwards. I am from Trussville, Alabama in the U.S. I am very close to the city of Birmingham, AL which is where I work .

I have worked in Aviation for over 30 years as a line service technician. I have been employed with Regions Financial for 4 years and I maintain our 3 aircraft which are used to fly our board members and executives. I clean the aircraft, refuel and tow them. We have 3 Bombardier Challengers. Two 350 models and one 300 model.

I am married to Melissa and we have four children between us. All grown except for two girls. One will be graduating high school in May of this year and the other will be a Senior in high school this coming fall.

I have always been very interested in mechanical watches and how they work. I also collect military leather flight jackets. However, as a hobby or a side business, I feel that watch repair would be more fulfilling and substantial in the long run. 

I am also in the beginnings of starting my own aircraft washing/detailing business.

I also served in the Army National Guard for 3 years.

Thanks for reading! I really hope to start repairing watches as a novice and progress from there.

Glenn

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • RichardHarris123
      Omega cal. 565 - low amplitude

      By RichardHarris123 · Posted

      @JohnR725 has pointed out many times that the Swiss don't care about amplitude, the timekeeping is the most important.  Give yourself a  pat on the back, great beat error and timekeeping, nothing to be disappointed about. 
    • RichardHarris123
      Without Our Forum

      By RichardHarris123 · Posted

      I'm bothered but I agree he's a busy man and I don't want to bother him.  In the meantime, we really do need to have other ways of contacting each other  
    • RichardHarris123
      Second hand watch market.

      By RichardHarris123 · Posted

      This is as complicated as epilame, too many unknowns. The life expectancy in the UK is circa 80, so most people from 1944 or earlier are dead.  Assume they had children at circa 20, they died in 2004. Their children started selling 1944 watches in 2004, so pre-1944 watches must be getting more rare.   It doesn't work though because as you stated some were sold as tat, but since watch prices have increased people have decided to sell when they may not of done in the past. 
    • Michael20
      Questions about my Bravingtons Renown Mantel Clock

      By Michael20 · Posted

      I was wondering whether anyone could assist with some questions I have about my latest acquisition, which is a two train ‘Bravingtons Renown’ mantel clock - Pics attached I have done some reading about Bravingtons and believe they sourced movements from various suppliers, so I wondered whether anyone recognises this one. I have stripped and cleaned the movement and the clock is now running well, but there are a couple of dodgy brass springs that I would like to replace. I haven’t found anything suitable searching the internet so I wondered does anyone know of a supplier that might help. Last question is about the veneer on the case, it is generally in reasonable condition but there are a couple of patches on the top where the veneer has lifted. So far, I have tried to reactivate the existing adhesive by heating from below and above with a hair drier, then clamping for a day or two. It has improved slightly but the bulge is still visible. I’d be grateful for any advice if anyone has dealt with this sort of repair before.
    • watchweasol
      Insert the movement inside the case

      By watchweasol · Posted

      Hi some pictures o& the movement and case would be appreciated so we can ascertain what the problem is you are having in fitting the movement.   Thank you.
×
×
  • Create New...