Jump to content

Musings On The Panerai Radiomir


Recommended Posts

A member of another watch forum has a Panerai Radiomir for sale. Apparently the RRP of this watch is £3,250 and he wants around £1,000 less than this for the watch.

 

It's a nice looking watch - I have no interest in Panerai and know very little about them - but something struck a chord about the movement, so I checked it out. Sure enough, it's an ETA 6497-2, a fairly standard, good quality, Swiss (ex-pocket watch) movement. Now, I bought my Hamilton Khaki Mechanical Field Officer's Watch, second-hand, for £200. It's a very nice watch - and the movement inside it is... an ETA 6497-2, identical to that in the Panerai.

 

Panerai actually call it calibre "OP II - base movement ETA 6497-2", but I can't see much difference in the Panerai and the Hamilton, and the Chinese 6497-2 I bought for my "Hong Kong Custom" cost me about £40!

 

So - is the price difference between Panerai and Hamilton all in the design, the case, the strap - the name? Or just one more example of where a name in the watch world bumps up the price?

Edited by WillFly
Link to comment
Share on other sites

There is a great deal of hype concerning watches with prices ranging from almost £500,000 for a Patek Phillipe minute repeater with tourbillon, yes a masterpiece but is it worth that sort of money?  I have just bought the watch pictured off the Bay for £9.96p and with free postage,  I know it's probably Chinese but what I'm interested in is value for money.  It really is up to the buyer to decide what they want to spend their money on and as long as they are happy who cares,  me , I still want value for money.

post-37-0-17252400-1415388664_thumb.jpg

  • Like 2
Link to comment
Share on other sites

I'd say the cost of the Panerai is mostly in the name. I'm not a fan of the looks of Panerai watches. From both an aesthetic and economic point of view, if I had that kind of money to spend on a watch, I wouldn't buy a Panerai. I'd really like a Hamilton Khaki though.

Link to comment
Share on other sites

Unfortunately the name means everything when it comes to price.

I am currently collecting watches at an affordable prices that have quality movements found in big name watches. This lets me work on quality movements that I would otherwise have second thoughts about tackling.

Link to comment
Share on other sites

Panerai also had a fairly big scandal a few years back. They offered Boutique models specific to the location of the boutique, Like New York, London, etc. called the Model 318(?).

The scandal was that the model that they were selling for $5000US actually had the lowest grade ETA 6497 movement inside. No decoration, no adjustments- nothing special about it at all. I can actually buy this movement brand new for $150.  They ended up offering to replace these movements with higher grade movements "IF" anyone requested them to do so, but only did so after a huge amount of negative press. 

Link to comment
Share on other sites

They make tweaks to some movements that make it impossible for an indy watch repairer to work on them.

That's interesting, what sort of tweaks are you talking about? I didn't think there was much you wouldn't tackle.

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Aloha All, I recently bought this Seitz tool on eBay, but it is missing some pushers reamers.  I ended up ordering new parts for those that were missing before I received the actual Seitz tool (bad idea).   Upon inspecting the pushers/bits, I noticed 23 of the 56 provided with the set had no numbers. Further inspection revealed a huge difference in the quality of those unnumbered.  Do all Seitz pushers/bits have a number on them?  I'm pretty sure that 33 of the 56 I received are cheap Chinese knockoffs.  The worst part is that I ordered $80 of parts to replace the missing pushers/bits, and now I'm looking to return the tool. I'm not crazy, right? If these are Seitz parts, they should all be numbered, correct? The first two pictures are the Seitz (numbered), and the other pictures are the suspect parts.  Will I even be able to get a refund?  Thanks, Frank     
    • It was £10 + min fee, total £16, could not leave it there. Its a Stanton A.D.2. http://stanton-instruments.co.uk/
    • Chief- The picture below shows the three parts from the dial side that are most useful to "fingerprint" a movement in conjunction with the diameter of the movement.  That's why forum participants are always asking for dial side photos in posts asking for identification.  As far as the setting lever screw, it actually sits loose in the main plate. The threads engage the setting lever below, and the elongated stem above the shoulder sticks through a hole in one of the bridge plates so that it's held captive if unscrewed all the way.  So you may be fine as far as that goes. 
    • So I found what I believe is the setting lever screw! Am I right in thinking the screw next to the click is the correct one for the setting lever? However if it is, it doesn't fit in the hole which I believe is for it! I can get the lever to sit nicely on the stem and line up with a hole, but the screw only goes as far as the shoulder and stops. It's as though the hole is too small! The dial side has been disassembled by the way, the other wheels are in my tray
    • When faced with say a pocket watch bridge which is cracked, silver soldering to repair is often the only option (hopefully someone wasn't there before hand with soft solder). I can generally do this succesfully and tidily with a small torch and miniscule pieces of silver solder, but on parts which were mercury amalgam gilded the heat can have have a deleterious effect on the finish.   I keep wondering if there's a good way to refinish these - and despite having the needful items would rather avoid using the mercury process.   In the past for electronic work I've gold plated PCBs but this involved gold potassium cyanide solution, which also doesn't realy belong at home. I've read that there are now safer alternatives but couldn't find more detail (and importantly how similar are the results to amalgam gilding, since I wouldn't want to refinish the whole watch). Pointers would be very welcome (and yes, I know solutions containing gold won't be cheap!) Alan
×
×
  • Create New...