Leaderboard

Odd! Don't believe it's a sprung crown. Sent from my Honor 5c

The stem is bought as a complete unit. If you are in luck all you need is to source the crown and stem combo? Which could be a little tricky? Is it a gold plated watch u have? If so this is the crown u need? 1E45B1SNG0 http://cgi.julesborel.com/cgi-bin/matcgi2?ref=SEK_CS^H801-6008 cousisnuk has it in stock https://www.cousinsuk.com/search?SearchTerm=1E45B1SNG0

Repainting has commenced, will hopefully be able to post photos when I'm done with that part. There's no indication of watts or hp on the motor, and the heating plate is so rusted I can't see anything to indicate what current it draws. However, the switches are both marked 3 amp, so I'm going to take it that 3 amps is the max current they can allow through to either the heating plate and motor. I'm hoping that's a safe assumption! I'm posting one of promised brush photos to see if I can make it work this time... Seems to work when turned to landscape, but not portrait orientation... Odd! One question on the bushes - the contact ends are slightly concave - were they likely designed this way, or is that from wear? If so, is it worth turning them through 90 degrees to even the wear? Need to source a new bulb and cover now. The old fitting is cross-threaded in, so I'm having a tough time getting it out. Plus all my tools are metric, and everything on this is imperial! Thanks again to everyone who's commented - it's really been a great help!

Thank you. Funnily enough, I was speaking to our local jeweller today about getting them all revalued. I forgot to attach pics of the Carrera or the 40s heuer. Here they are: