Jump to content

H Samuel Pocket Watch


Recommended Posts

Gents, second purchase from the local antiques fair, a nice H Samuel silver cased with solid silver chain and original key for £20, a fair price I think, anyway, on the dial it has “climax trip action patent” can anyone shed any light on what this actually means?

Ive found a few pictures on line of the movement which doesn’t show me anything unusual, so thought I’d ask to see if any other members have one and could shed some light on this model please.

The pictures attached are straight from the net but are of the same watch as mine. Cheers guys

E23CD983-0DDA-45AC-99CC-D913DEA51624.jpeg

F80D6890-BE12-4381-82C7-B3A63D85FF13.jpeg

Link to comment
Share on other sites

I found quite a few past auctions of them by doing a google search, and it seems to refer to the cover over the movement that has that spring on it. All the auction houses were in the UK.

Description from one of them -
The watch has a key-winding movement which is working well. The watch was made by the Lancashire watch company for H Samuel. The movement is stamped H Samuel, Market St, Manchester and it is protected by an inner fitted cover stamped Climax Regd, Guaranteed English Manufacture Throughout. A winding key is included.



Sent from my iPad using Tapatalk Pro

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hello, I am about 5 months into watchmaking and I love it!   The attention to precise detail is what really attracts me to it. (and the tools!) I am working on a 16 jewel 43mm pocket watch movement.   There are no markings besides a serial number (122248) .  The balance staff needs replacement. The roller side pivot broke off.  I successfully removed the hairspring using Bergeon 5430's.  I successfully removed the roller using Bergeon 2810.   Did i mention I love the tools?! I removed the staff from the balance wheel using a vintage K&D staff removal tool  with my Bergeon 15285 (that's the one that comes with a micrometer adjustment so it can be used as a jewel press as well as a traditional staking tool...it's sooooo cool...sorry..  can you tell i love the tools?) No more digressing..  I measured the damaged staff in all the relevant areas but I have to estimate on some because one of the pivots is missing. A = Full length  A= 4.80mm  (that's without the one pivot...if you assume that the missing pivot is the same length as the other pivot (I'm sure it's not)  then A = 5.12 mm...(can I assume 5.00mm here?) F=  Hair spring collet seat  F=  .89mm   (safe to assume .90 here? .. I am sure that my measurement's would at least contain  .01 mm error ?) G = balance wheel seat  G = 1.23 mm  (1.20mm?) H  =  roller staff  H =  .59mm  (.60 mm?) B  = bottom of the wheel to roller pivot   B  = 2.97mm  (3.00 mm?)     here I am estimating  again because this pivot is missing. So my friends, and I thank you profusely,  can you point me in the right direction as to how to proceed? Do i buy individual staffs?  or an assortment?   Since I don't know exactly the name of the manufacturer, will that be a fatal hindrance?   Tbh, I'm not even sure what country of origin this movement is. Thank you!    
    • Thats why i asked that question earlier, what happens if lubrication is placed directly on top of epilame ?  As opposed to walled within its non epilamed area . I'm not saying its right, i have no idea , just asking questions. 
    • thinking of where epilam should be removed did you know there was a patent that covers this? At least for the escapement I'm attaching it. GB1057607A-1 epilame.pdf
    • Back home...printing now.  Will report results
    • Oh well, if Master @nickelsilver says it's the way to go, then it is the way to go! I stand corrected! 🫡 Are there any other places where you're supposed to remove the epilame from the contact point of rubbing? I don't think so! Thanks for the effort @Neverenoughwatches, much appreciated! 🙂👍
×
×
  • Create New...