Jump to content

Movement winding in hand setting position

AP1875

By AP1875
in Watch Repairs Help & Advice

 Share

Recommended Posts

AP1875 WRT Addict

AP1875

Posted
Posted

Hi guys, I’ve been following the course. I’ve taken the the 6497 apart and rebuilt it a few times before I move onto oiling it. No issues up until now.This particular time during reassembly when I turn the crown in both positions the watch winds....

 

The winding pinion is not staying stationary in the hand wind position and is turning and obviously winding the movement. I had a good look at it and I can’t visually work out what I’ve done wrong. I imagine it’s something within the keyless so when when I get the chance I’ll strip it down and rebuild it.

 

Assuming that it is the keyless and everything works when I put it together again, does anyone know where I’ve gone wrong as I’ll never know (assuming all is fine after trying again)?

 

 

Thank you

 

 

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • pc1093
      raketa watch Movement Removal

      By pc1093 · Posted

      I have removed the stem and open the case. The Movement can't drop out but it can be rotate Anyone has idea THANK YOU
    • deni2s
      Roland Ranfft RIP

      By deni2s · Posted

      Not a family member, and yes, it no way near as good, as some information got lost from original site and some information got incorrectly copied. The original site is available as iOS app here: https://apps.apple.com/fi/app/ranfft-watch-movements-archive/id6502008939
    • Hawaiikook808
      Seitz Tool - Help determine if Seitz or not

      By Hawaiikook808 · Posted

      Outstanding, Marc! Your information is really helpful and clears this up, especially given that yours were purchased as sets. Thanks, man. So, it appears I jumped the gun on this one, but I am relieved. I will say, though, that all of my reamers and concave pushers are number-stamped and appear to be of better quality.  Also, the bayonets on my pushers are actually the same color as the steel.  The next thing to do is restore the heads of these pushers with some polishing paper.  Alex at the Watch Repair channel has a nice little video on this.   I appreciate your help! Frank      
    • Marc
      RANFFT Database is down!!

      By Marc · Posted

      Just installed it on my iPhone (my only iOS device) and it appears to be intact and functional. I may have to go out and buy myself an ipad just for this app.
    • Marc
      Seitz Tool - Help determine if Seitz or not

      By Marc · Posted

      I have two Seitz sets, one ancient (with the 3mm anvils) and one just old (with 4mm anvils) plus a collection of spare pushers of assorted vintage. Not one of them is marked with it's size. Something which I have found very irritating when I have been using the tool and not returning pushers to their correct place in the tray every time as it means that I have to get the calipers out and measure them. These were bought as sets and collectively I have over 100 pushers so it would seem highly unlikely (if not inconceivable) that they are all cheap knock offs, especially as they are old enough to pre-date the prevalence of the Chinese knock off industry (at least as applied to watch making tools). I therefore believe them to be original Seitz parts. And there is no numbering. The shape of the bottom of the pump pushers is the same as your photo. The only thing that may not be the same is that the slotted insert (looks like a screw but is in fact a bayonet) should be brass. Yours looks the same colour as the steel but that could just be the lighting.
×
×
  • Create New...