Jump to content

Educate me some more on English Fusee Clocks


Tmuir

Recommended Posts

I've found two English Fusee clocks, the first one I think is genuine WWII vintage, the second one I'm not so sure on.

It has some features of the reproduction clocks, but not all of them.

Have a look and let me know if the are just late examples, or atleast the second one a reproduction.

https://www.ebay.co.uk/itm/Antique-vintage-military-P-A-A-wall-fusee-clock-working/253732931111?

 

https://www.ebay.co.uk/itm/Antique-English-Fusee-Gallery-Or-Pub-Clock-Incomplete-Small-Size-Rare/163155806098?hash=item25fcd80792:g:iYEAAOSwsbBbRmMP

Link to comment
Share on other sites

The first is a genuine 8-day fusee with chain wall clock with anchor escapement.  One fixing peg has been replaced. The key I would suggest changing. These clocks are easier to wind with a crank key.  

 

The second is a genuine 8-day fusee with steel line wall clock with anchor escapement.  One fixing peg missing. Don’t see any key. The plaster of Paris needs to removed and replaced inside the bezel.  

Both dials are poor and would need restoring. You have to be careful with the bottom opening doors, you will find many locks do not open, keys lost. Due to the moving parts and movement of the pendulum the doors tend to open on their own, some are so loose they will not close shut. The side doors also need to be looked at, hinges get broken, wood warping due to heat or dryness do not close properly. The first one is the one I wold go for.    

 

  • Like 1
Link to comment
Share on other sites

Yes the first one I was definately more interested in.

I was about 70% sure the second one was genuine, but in not as nice condition, but then it is selling for 1/4 of the price.

I do agree the second clocks dial is had it, but I actually don't mind the slightly distressed dial on the first one.

The broad arrow with PAA definately makes the first one more interesting. Unsure what PAA stands for, as the only acronym I can find that might fit is ' Pan American Airways ' and aparently during WWII there was a  PAA Seaplane Base in Colmslie Brisbane Australia, but that seems to be a stretch.

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • All I do is use a fine marker (sharpie) to put the service date on the back cover, this way it can be removed with some IPA and does no permanent damage to the watch. I'm in two minds about the whole service marking thing, sometimes it's good/bad to see the markings on the watch case back as you know it's been worked on and vice versa. However, if I took my car in for a service and the mechanic scratched some code into the housing of my engine I wouldn't be too impressed. Hence, I think my sharpie solution is a reasonable compromise.
    • hmmmm.... maybe there is a way to skin that cat 🙀 let me think on it... unless anyone else has any ideas? I left the opening in the side of the base and ring quite large to maybe allow you to grip the crown, but appreciate this may not always be possible, especially for small movements where the crown will not extend past the outer wall of the holder. I noticed this also, but after using the holder for a while I noticed that the ring/holder began to wear into shape (rough edges/bumps worn off) and the size became closer to the desired movement OD. Maybe with some trial and error we could add 0.5 mm (??) to the movement OD to allow for this initial bedding-in?
    • Hi nickelsilver, thanks for the great explanation and the links! I'll take a good look in the article.  Especially this is great news to hear! Looking through forums and youtube videos I was informed to 'fist find a case and then fit a movement for it'. But seems that's not the case for pocket watches at least?  I guess I should be looking to find some 'male square bench keys' for now. I was thinking of winding the mainspring using a screwdriver directly, but I found a thread that you've replied on, saying that it could damage the spring. 
    • Murks, The rate and amplitude look OK, and the amplitude should improve once the oils you have used get a chance to move bed-in, also I notice that you are using default 52 degrees for the lift angle, if you get the real lift angle (assuming it's not actually 52) this will change your amplitude - maybe higher, maybe lower. I notice that the beat error is a little high, but not crazy high. At the risk of upsetting the purists, if the balance has an adjustment arm I would go ahead and try and get this <0.3 ms, but if it does not have an adjustable arm then I would probably leave well alone. Just my opinion.
    • Hi everyone on my timegrapher it showing this do a make anymore adjustment someone let me know ?    
×
×
  • Create New...