Stem and crown for a Valjoux 9

[Jam]

Hello all, I have been struggling to find a replacement stem and crown for a pocket chronograph that I have running a valjoux 9 movement.  Since the piece did not come with one to begin with, I don't have the stem measurements.  If anyone has any suggestions for me I would greatly appreciate it.  The outer measurement of the crown tube is 8mm and it is supposed to have a pusher type crown that has a button in the center to activate the chronograph.

[jdm]

I don't know the answer here but wanted to mention that most members consider polite to use the dedicated section to introduce oneself before asking questions.

[Jam]

Sorry for the faux pas, I have taken your advice and posted an introduction.  Thank you.

[Delgetti]

Hello,

I didn't work on such a movement yet, but at Ranfft it looks like the Valjoux 9 is a member of the Valjoux 5 family and may have the same stem W1730.

http://www.ranfft.de/cgi-bin/bidfun-db.cgi?00&ranfft&&2uswk&Valjoux_5_KVM

There is a seller in germany who has it on his list:

https://www.ebay.de/itm/eine-AUFZUGWELLE-fuer-AU-und-Taschenuhr-AUSWAHL-aus-1000-W-Nummern-AUFZUGWELLEN-/262677133494

Hope this helps a bit.

Erik

 

[Jam]

Thank you for the information Erik, I will give that a try and see if it works and report back.