Jump to content

AS 175

Redwood
 Share

Recommended Posts

rogart63 Distinguished Member

rogart63

Posted
Posted

Can see that there is such a movement. But can't find any pictures of it. Can you post a picture? Mainspring is the same in the AS922 944 and 960. Maybe they could have the same  barrel arbor? 

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted (edited)
8 hours ago, Redwood said:

https://www.google.co.uk/search?q=AS175+movement+parts&rlz=1C9BKJA_enGB725GB725&oq=as175+movement&aqs=chrome.0.69i59j69i57.13537j1j8&hl=en-GB&sourceid=chrome-mobile&ie=UTF-8#imgrc=7hlcLrRb66TsyM:

This look the same? http://www.millsys-watch.co.uk/as-2b-vintage-movement-with-dial-and-hands-3662-p.asp

Or this could work? http://www.millsys-watch.co.uk/as-cal175-running-movement-great-for-a-project-3269-p.asp

Edited by rogart63
Link to comment
Share on other sites
Redwood WRT Addict

Redwood

Posted
  • Author
Posted

Thanks for that, It is the second of the two which is more like it but mine only has 4 Jewels. Worth A go if nothing turns up.  When I go back to work next week I'll try and drill the old screw out on a lathe  

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Nucejoe
      Part 3 of the never ending saga

      By Nucejoe · Posted

      Did the balance run good with the old cock?  if not, 1-Check if the roller table rubs on fork horns, in case you can,t verify anything visually, remove the fork . 2. Check end shake on balance. 3. See if H/S rubs on balance spokes or on underside of the cock or the coil fouls itself. Once you had the balance detached from the cock, you had a chance to check pivots for shortness  or bent or chipped pivots? You ought to check these now. Are you sure jewels in the setting are clean & fault free? Good luck
    • Dell
      Clock hand removal

      By Dell · Posted

      Wasn’t sure where to put this but Because of the problem I have with my hands ( gout in both )I have trouble holding things especially torsion clock hands to remove them, I have tried the usual tools but not impressed with them but to be fair one was for watch hands anyway I see an antique one on eBay so put a bid on it needless to say I was out bid but decided I could make something similar and I must say it works a treat, I decided to thread my one but it looks like the one on eBay was a push operation see last picture. Dell
    • Neverenoughwatches
      Watch of Today

      By Neverenoughwatches · Posted

      Wearing a big lump of a watch today. Feels like i have a kettlebell on my wrist. Aw no and i promised no more bare leg shots 🤷‍♂️ , good god our lass needs her legs shaving and before anyone asks no she didn't lay the watch on top of my head and take a picture 😅
    • Marc
      Bergeon Mainspring Winder to Handle Size

      By Marc · Posted

      I have a Bergeon set, a Chinese set, and and anonymous set (in aluminium), and all of the handles and winders are interchangeable. There are slight variations in the fit but essentially they all fit and work.
    • Dell
      Graver handles

      By Dell · Posted

      I made my own because most people’s hands are different so making your own means you get the most comfortable fit , just hardwood dowling brass tube and a length of HSS. Dell
×
×
  • Create New...