Jump to content

Omega Repair And Light Restore


Recommended Posts

Got this Omega from the sales corner on Rlt being sold for repair ,the spring was slipping and the second hand was missing , crystal cracked and a bit grubby.
So stripped it ,cleaned dial with a good old drop of saliva , fitted new mainspring as the tail end had broken off causing it to slip , cleaned and lubed movement , a 268 17 jewel manual dating at 1960 , found a new second hand from a donor watch fitted new crystal and here she is.
It's never going to be a safe queen as the plating is a bit shabby and the dial isn't perfect by any means but it's a wearable vintage piece hopefully.

Been running now for almost 24hrs and is keeping good time , which is always a bonus

 

DSC_7484_zps0c265e91.jpg

 

DSC_7485_zpscac395a0.jpg

 

DSC_7486_zpscddddc65.jpg

 

 

DSC_7495_zps6fd6df0d.jpg


 

Link to comment
Share on other sites

It's 1964 - Cal. 601. You can't tell from the photo, but there's quite a bit of plate loss from the upper part of the bezel. It hardly shows, but I may yet swap it for a similar one with a better condition case.

 

Or just buy another, of course... :crazysmile:

Link to comment
Share on other sites

Thought you could only use spit and polish with boots but that is quite an appreciable difference on the dial.

Wiki says saliva is 99.5% water, while the other 0.5% consists of electrolytes, mucus, glycoproteins, enzymes, and antibacterial compounds such as secretory IgA and lysozyme.

Wonder if the water did the job or the special mix in the other .5% either way it worked. Outstanding job.

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Interesting interpretation of "traditional". I would say that Loctite is definitely the up-to-date and appropriate stuff to use, however, it is a relatively modern solution. Before the advent of such esoteric solutions I believe that the "traditional" thread locker of choice may well have been a sugar solution. Once applied the water would evaporate and the sugar would crystalise, locking the threads tight.
    • @steve1811uk close but no cigar 🙂 I don't smoke anyway. I checked in my stock of parts and that's the closest I got to your dimensions. Good luck in your search. @RichardHarris123 I have an accumulation of all sorts of odds and ends that I acquired as a result of buying up the tail ends of old watchmakers estates. Usually after all of the great stuff has been stripped out, which means that the sweepings off of the workshop floor can be had for peanuts, but if you have the patience, can often be found to contain gold (both literally and figuratively 🙂 ). These came to me through on of those purchases. I doubt that I will personally be able to make use of even 10% of my accumulated stock, but having it, and knowing what I have, means that I can at least pass bits on to those who can use it whenever possible.
    • Hi and thank-you for your suggestions, as per Mark's instructions I checked my browser "Safari" and spell check and grammar was not ticked. So all sorted. Thanks CJ  
    • As an alternative, clear nail Polish, the advantage is you can have a manicure at the same time. 
    • I use Grammarly. It works really well and If English is not your first language, you will also receive help with formulations. There is a free version that covers most of my needs. It installs as a plug-in and works with all browsers and word processors.
×
×
  • Create New...