Jump to content

An Interesting Silver Penknife


Recommended Posts

A member of another watch forum was selling this silver penknife  - and I bought it on a whim. He'd originally bought it to use as a case opener but changed his mind - hardly looked at it, in fact. So - typical me - I bought it on whim, just because I liked the look of it. Just for a few quid.

 

Anyway, I got it this morning, cleaned it up with a silver cleaning cloth and took a good look at it with a loupe. It's hallmarked for Sheffield, 1947, and has the Sheffield City coat of arms engraved on one side. The other side had a signature engraved on it - "A.V. Alexander". So I idly looked up A.V. Alexander on Google - and discovered that a chap of that name was a Labour Co-operative peer, three times 1st Lord of The Admiralty, etc., etc. All about him here:

 

http://en.wikipedia.org/wiki/A._V._Alexander,_1st_Earl_Alexander_of_Hillsborough

 

I thought - could he be the same man who's signature is on my knife? So I found an image of the actual signature of Earl Alexander of Hillsborough - and here are the two signatures (ignore the top name on the signature paper):

 

post-64-0-86001100-1410453148_thumb.jpg

post-64-0-96452000-1410453150_thumb.jpg

 

What fun! Presumably his personal property...

Edited by WillFly
Link to comment
Share on other sites

Nice piece of history Will! I also collect knives but mine are just utilitarian, nice to handle...and pretty to look at! Not much of history in my collection. I use them mostly for the occasional hunting trip and others for cooking (also occasionally).

 

Do you think you can get a reward for yours?

Edited by bobm12
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Hi everyone on my timegrapher it showing this do a make anymore adjustment someone let me know ?    
    • Maybe I'm over simplifying this and I'm a little late to the discussion, but just by my looking at oil when I use it on a treated cap jewel  the oil stays in one nice bubble, but when I don't it spreads out to the edges of the jewel. I'm not sure (but could well be wrong) but the analogy of a waxed car and rain is accurate in this case, the wax is very hydrophobic and repels the water, however, the process epilame works by is a different physical process based upon cohesion/adhesion (oleophilic) not repulsion (oleophobic)  at least as far as I have read/observed. If one were to use a oleophobic substance equivalent to wax (hydrophobic) then one would need to create a donut shape to fence in the oil, however if one used such a strategy with a epilame which is oleophilic then the oil would sit on the ring of the donut and not in the 'donut hole', exactly where you don't want it. Even is the oil is smeared then the oleophilic epilame should pull it back to the center (see diagram below). Reference
    • Looks lint the teeth on the hour wheel aren't meshing with the teeth on the calendar intermediate wheel, maybe the hour wheel is sitting on top of this instead of meshing?        
    • If the oil drop was freely standing on an epilame treated cap jewel it could easily slide off if you knocked the watch hard but the balance pivot keeps it in place. 
    • Latest 404 is this Baron which has a copy of a Seiko 66B movement in it, handy when I needed to find a replacement setting lever. Apart from the setting lever, crown, stem and new crystal (original was cracked) the watch is original. Finished result:
×
×
  • Create New...