Jump to content

1971 Timex Electric Mickey Mouse


Recommended Posts

In 1971 Timex introduced the first battery operated Mickey Mouse watches.  They were available in both gold toned and chromed cases. Here we have a gold toned case example I just bought as a BIN off eBay for $8.00.  Based on the sellers pictures it was quite easy to see it was messed with at some point ( no hands or crystal).  But, I figured for 8 bucks it worth a shot.

So lets see what we have and what can be done.

DSC05537.JPG

DSC05538.JPG

DSC05539.JPG

 

At this point it look promising since the balance and hairspring are intact.

So I continue with the breakdown and do find one dial tab is snapped off.  Not much of an issue.

DSC05543.JPG

DSC05545.JPG

DSC05546.JPG

Edited by JerseyMo
Added to topic
  • Like 1
Link to comment
Share on other sites

I began the remaining tasks for the restore this morning.  First was to clean out the movement and reapply lubrication afterwards.

I decided to give denatured alcohol a try. Time will will tell if it was a good option.  All cleaned and lubed, ready to put it all back together.  Note the wear to the case, this is very common with Timex.  

I knew I had spare hands for this one which is one reason I bought it.  I also noticed it was missing the dial ring.  that is one item I have plenty of thanks to F.S. ( More about Fred in future posts).  

Fitted with a new crystal and ready for a daily wearing.  I did have to adjust the sweep some as it was just touching the crystal.

With a light bend down it looks to have taken care of that.  

 

DSC05548.JPG

DSC05552.JPG

DSC05554.JPG

DSC05555.JPG

DSC05556.JPG

DSC05557.JPG

DSC05559.JPG

DSC05562.JPG

DSC05564.JPG

  • Like 2
Link to comment
Share on other sites

I like Micky watches. I remember seeing a lady police officer wearing one and the smile when she saw I had spotted it.

I have a Fossil Mickey in a similar style to your Timex. I wear it to high powered meetings...

When people refer to a 'Mickey Mouse' set up I'm inclined to point out that Walt Disney Studios is a Mickey Mouse set up and did all right.

It's OK, nurse says it's time for my tablet. Bye - bye

 

Sent from my iPhone using Tapatalk

 

Link to comment
Share on other sites

  • 2 months later...
  • 3 weeks later...
  • 5 months later...
  • 5 years later...


  • Similar Content

  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I did that also for a few movements - well, mainly in/around the train jewels. I made big efforts to epilame the mainplate WITHOUT getting Epilame into the Pallet fork jewels (where it's not supposed to be, right?). I made litte barriers with Rodico around that jewel and used drops from a syringe to apply on the rest.  However, I've now stopped doing this. For three reasons: 1. It's a hassle and consumes more of this liquid gold. 2. I didn't see the need when using HP1000/HP1300 lubricants and grease for most part. The two places where I'd use 9010 (i.e. escape wheel and balance) receive Epilame in specific places... or the cap-jewel-setting of the balance suspends the oil sufficiently be capillary action (see my "conflict" about using Epilame on the balance jewels).  3. Lastly, and here I really wonder about yours and others' experiences: I felt that applying Epliame to the train jewels left them looking hazy (borderline dirty) compared to the (painstakingly achieved) sparkly clean results of my cleaning process. I just can't help but think that the Epilame residuals would mix with the oil and cause more friction/wear. I don't know.    simple: it'll stay there. It won't move any further. That's exactly what is happening if you epilame a cap stone. You end up placing the 9010 right on top of the epilame and the oil will sit nicely on that spot.
    • There are some parts on Ebay for the seiko 6020A, it may just be a waiting game for someone to strip one down, NOS will be more scarce . K would strip your movement down to the module then start looking at other seiko movement to see if that coil is used, then seek out a seiko part dealer. Also Retrowatches youtube owner Mike may give you some advice try him on his site . He also hangs around amateur watchmaking groups.
    • I would agree, in order to work harden something you need to exceed it's yield strength when it moves from the elastic zone to the plastic zone and you get permanent deformation and work hardening which is fairly close to its failure point, relatively speaking and dependent on the material/alloy of course. In theory you can load something constantly within its elastic range and not suffer work hardening issues.
    • Probably easier to get a complete new movement - but CousinsUK list it as discontinued. Maybe someone on here knows a substitute movement ?
    • Any other thoughts on how I can get a replacement coil? Any “hidden” or unknown physical shops (in Australia or elsewhere) that might have them in stock (but not always online)?
×
×
  • Create New...