Jump to content

A Dumont & Fils question

Takingblame

By Takingblame
in Tools & Equipment

 Share

Recommended Posts

Takingblame New Member

Takingblame

Posted
Posted

Hi, new guy here. I recently came upon a collection of a Dumont & Fils tweezers. I know they are specialty tweezers for watch repair. Can any one shed some light on the tweezers and specific use cases?? I don't repair watches, but I figured I would come here to ask the pros about them.

Thanks!! I will post a gallery to the tweezers when I get home tonight.

 

Sent from my Moto G (4) using Tapatalk

 

 

  • Like 1
Link to comment
Share on other sites
Takingblame New Member

Takingblame

Posted
  • Author
Posted
Are you selling them??

Yes I will be selling them, I would like to sell them to some one who will use them for the specific use case they were designed for. I build race drones and do some machining on a lathe, so the precision of these tweezers is wasted on what I usually use tweezers for.

 

I will probably keep maybe one or two. What ever I feel I will actually use. I don't see my self using the very fine tip pairs.

 

Sent from my Moto G (4) using Tapatalk

 

 

 

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted (edited)
 

Are you selling them??

I now what you think Geo? Not sure it's within the forumrules? 

 

Yes I will be selling them, I would like to sell them to some one who will use them for the specific use case they were designed for. I build race drones and do some machining on a lathe, so the precision of these tweezers is wasted on what I usually use tweezers for.

 

I will probably keep maybe one or two. What ever I feel I will actually use. I don't see my self using the very fine tip pairs.

 

Sent from my Moto G (4) using Tapatalk

 

 

 

I am sure there is some  that  is interested?  But have you checked that it is okay to sell them trough the forum? 

Edited by rogart63
Link to comment
Share on other sites
Takingblame New Member

Takingblame

Posted
  • Author
Posted
I am sure there is some  that  is interested?  But have you checked that it is okay to sell them trough the forum? 

I noticed there was NOT a classified section of this forum; so out of respect for this community I had no plans to post links to my ebay page. I will have to read through the rules and regs to figure out the best way to give the members of this forum an opportunity to acquire sought after tools.
Finding a good home for these tools is the main reason I am here.
I am assuming as with most who frequent this forum, tools are more than tools. They are legacy items.

Sent from my Moto G (4) using Tapatalk

Link to comment
Share on other sites
Takingblame New Member

Takingblame

Posted
  • Author
Posted
There is lots of different Dumont tweezers. Different models are prefered by different watchmakers. 
https://www.dumonttweezers.com/

Hey thanks for this link. Is there some where, where I can find info on the number system used to identify different models?? I assume it's a guage rating relative to the small components of watch movements; but not quite sure.

Sent from my Moto G (4) using Tapatalk

Link to comment
Share on other sites
Takingblame New Member

Takingblame

Posted
  • Author
Posted
There are many outlets for selling goods on the net, but this forum has a strict no- sales policy.

Thanks for the info. I will be sure to familiarize myself with the rules and regs fo this forum before I continue on.

Sent from my Moto G (4) using Tapatalk

Link to comment
Share on other sites
jdm Distinguished Member

jdm

Posted
Posted (edited)
 

I build race drones and do some machining on a lathe, so the precision of these tweezers is wasted on what I usually use tweezers for.

I think that if you post some pics of your creations and work this thread will lighten up :)

Don't be too quick in taking blame LoL

Edited by jdm
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Chief
      Generic screws for unknown movements

      By Chief · Posted

      So I found what I believe is the setting lever screw! Am I right in thinking the screw next to the click is the correct one for the setting lever? However if it is, it doesn't fit in the hole which I believe is for it! I can get the lever to sit nicely on the stem and line up with a hole, but the screw only goes as far as the shoulder and stops. It's as though the hole is too small! The dial side has been disassembled by the way, the other wheels are in my tray
    • AlanB
      Gilding after silver soldering

      By AlanB · Posted

      When faced with say a pocket watch bridge which is cracked, silver soldering to repair is often the only option (hopefully someone wasn't there before hand with soft solder). I can generally do this succesfully and tidily with a small torch and miniscule pieces of silver solder, but on parts which were mercury amalgam gilded the heat can have have a deleterious effect on the finish.   I keep wondering if there's a good way to refinish these - and despite having the needful items would rather avoid using the mercury process.   In the past for electronic work I've gold plated PCBs but this involved gold potassium cyanide solution, which also doesn't realy belong at home. I've read that there are now safer alternatives but couldn't find more detail (and importantly how similar are the results to amalgam gilding, since I wouldn't want to refinish the whole watch). Pointers would be very welcome (and yes, I know solutions containing gold won't be cheap!) Alan
    • Neverenoughwatches
      Can anyone identify what this is? Part Two

      By Neverenoughwatches · Posted

      The first one is an Unruh max stake for pushing out staffs
    • JonC
      Can anyone identify what this is? Part Two

      By JonC · Posted

      Ok so with the great answers for my previous question may I ask what these two attachments are used for. The one with the red knob is I assume used for hand setting the seconds hand? Jon      
    • Zedster
      Roamer Searock Crystal problem

      By Zedster · Posted

      According to Cousins site I need to look at document G22 as I think I need an ATGB at 304 but I cant find this size in G22 doc. The last thing I want to do is order the wrong one😳  Unless I cant see the wood for the trees 😆 I could be looking at the wrong style, I assume its classed as Round plastic Armed  https://www.cousinsuk.com/product/wide-ring-gold-atgb
×
×
  • Create New...