Jump to content

Help with Ralco watch


Recommended Posts

My husbands dad had a Ralco watch from the Second World War when he was in the army, he won it in a card game and wore it until he died a couple of years a go. Does anyone know where I could get it repaired, I know it's not very valuable but would like to get repaired for my husband. Our local jewellers wanted £200 to have a look and could not guarantee any repairs. Only thing on it is a Ralco waterproof shock protected anti magnetic Swiss made with a silver coloured stretch strap. Thanks

Link to comment
Share on other sites

HI Sheila,

The reason the jeweller can not guarantee repairs is because spare parts will be difficult to source. However if the watch just needs a service then any competent jeweller or an independent repairer should be capable with this. I have attached a BHI link that shows their accredited repair shops throughout the UK and overseas.

http://bhi.co.uk/find-a/how-to-find-a-professional/

Link to comment
Share on other sites

1 hour ago, Sheila said:

My husbands dad had a Ralco watch from the Second World War when he was in the army, he won it in a card game and wore it until he died a couple of years a go. Does anyone know where I could get it repaired, I know it's not very valuable but would like to get repaired for my husband. Our local jewellers wanted £200 to have a look and could not guarantee any repairs. Only thing on it is a Ralco waterproof shock protected anti magnetic Swiss made with a silver coloured stretch strap. Thanks

200 Euros to look (estimate) a watch? I suggest you look for a better estimate in another watchmaker. Because 200 Euros is too expensive in my opinion.
Link to comment
Share on other sites

10 minutes ago, SeikoWatch said:
200 Euros to look (estimate) a watch? I suggest you look for a better estimate in another watchmaker. Because 200 Euros is too expensive in my opinion.

If the jeweller had an idea what is wrong.  i.e. if he suspects it is the balance staff then £200 is not far off when you consider it will have to be made. For a straight forward service then yes it is over the top but with fewer repairers available in many areas customers have little or no choice. 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • I was pleased to pick up a selection of some tools on ebay (v cheap 🤣), and they've just arrived,  I've been looking for a crystal press for a while, and this one is ideal But in the selection is this thing - what is it for?  (it's about 3" long) Something to do with stem tubes?  
    • You'll have to strip it back anyway.
    • I think I've heard that more than from just Alex. That doesn't make it right though, but I'm convinced i saw some literature diagram explaining why to do that. There must be good info here in the archives, I'll have to have a dig around. 
    • That will mean dismantling the gear train, which with 5 pivots to align was a pain. Probably going to have to though. I'm convinced it's something to do with the great wheel. 
    • As far as I know, the only time an epilame treatment has potential drawbacks is when something is rubbing on the treated part w/o lubrication in between creating abrasive dust. That is, I don't believe in the method of "running the watch to make a groove through it first in the pallet stones where the lubrication is then placed". So, I think the rule would be; do not epilame treat parts where rubbing is going on without lubrication. Other than that I don't think we have anything to worry about. That said, I'm not an expert, and I'm always happy to learn more. Has any other repairer than Alex suggested or explained the "making-a-groove" method? My impression is that it's just something he constructed in his mind. I have not perceived it as a generally practiced method. Again, I could be wrong!
×
×
  • Create New...