Jump to content

Seiko 6139-6002


arkobugg

Recommended Posts

Hello Mates!!

Im working on i dial for a Seiko 6139-6002 with the golden colour dial, and want to refurbish this dial. And I need some paint that can match the existing colour.

Is there anybody that have some experience with nail polish??

Can this be used, and how to aply it to area that are 0,3mm X 0,3mm

Thanks and best

 

 

 

 

Link to comment
Share on other sites

Hi arkobugg,

I usually don't retouch dials since they are very delicate. On one or two occasions I have use a very small (super small) dab of black acrylic paint on a certain type of dial as a last resort and was able to hide -- with lukewarm success -- the tiny dot on the display. Not recommended!

That said, I don't think any dial will really be able to be completely restored unless you use professional methods that, by the way, seem to be kind of well guarded.

Cheers,

Bob

Link to comment
Share on other sites

On 21.10.2016 at 5:31 PM, bobm12 said:

Hi arkobugg,

I usually don't retouch dials since they are very delicate. On one or two occasions I have use a very small (super small) dab of black acrylic paint on a certain type of dial as a last resort and was able to hide -- with lukewarm success -- the tiny dot on the display. Not recommended!

That said, I don't think any dial will really be able to be completely restored unless you use professional methods that, by the way, seem to be kind of well guarded.

Cheers,

Bob

Hi Bob, just as I thought....I know is that is a difficult task, but this dial is very rar and hard to find original. ....

Can you ore anyone else recommend someone that can do this ? here is a photo of the dial.

Thanks Armand

 

DSC_0056.JPG13277676_465090420363029_2070390318_n.jpg

Link to comment
Share on other sites

14 hours ago, arkobugg said:

Hi Bob, just as I thought....I know is that is a difficult task, but this dial is very rar and hard to find original. ....

Can you ore anyone else recommend someone that can do this ? here is a photo of the dial.

Nothing is wrong with it. Leave it alone, and wear it with pride.

  • Like 1
Link to comment
Share on other sites

On October 23, 2016 at 8:39 PM, arkobugg said:

Hi Bob, just as I thought....I know is that is a difficult task, but this dial is very rar and hard to find original. ....

Can you ore anyone else recommend someone that can do this ? here is a photo of the dial.

Thanks Armand

 

DSC_0056.JPG13277676_465090420363029_2070390318_n.jpg

I really have to agree with jdm,...There's nothing wrong with it . Leave it alone and wear it . 

Having said that  , you seem to think this dial is rare . An original would be hard to find , but you putting make-up on it isn't going to improve the value .  I just saw 3 AM gold colored dials for sale on ebay going from $14+ to $35 + , and yours looks as good or better than those . 

I really decided to input my 2 cents worth into this post because having a few vintage Seiko chronometers , I wouldn't consider a Pogue "rare" because there are so many on the market with the sellers all claiming them to be rare , then putting an unrealistic "buy it now price " in an effort to support the "rare" discription . 

I would consider a Pogue dial that was original with the words ," Water70Resist " , to be scarce , "Water70Proof"  to be even scarcer , and the first Pogues with the notched case at the crown position to be Rare .

In any case I think yours looks good enough to wear just as it is .  I have a gold dial Pogue , and  it is good looking .

Aloha ,

Louis

Link to comment
Share on other sites



  • Recently Browsing

    • No registered users viewing this page.
  • Topics

  • Posts

    • Bulova Accutron 2181 - had an open coil I managed to bring it back into life. Longines 9L - not serviced just pics   Eterna-Matic Centenaire "61" - 1438U - not serviced just pics. Longines Cal 431 - not serviced just pics Lemania Cal 4650 - not serviced, just pics.
    • attached is the tech /parts sheet. .   Can one ask how come it’s full of water. After being told that the waterproofing was not guaranteed.  Problem being electronics don’t mix especially withe the power source being attached.  You may be lucky but I should look out for a replacement movement or working donor to rob the movement from. C720.pdf
    • I thought this may be "right" forum to post this. After 7 months out in Switzerland I got my Navitimer back from Breitling. I had sent it off since its 20 years old to have a complete overhaul done... Nothing major wrong, but I did notice this seconds sundial skipping thingy.... $1300 later and 7 months later, I notice the 'skips' are still here unless the chronometer is engaged. I would think this is likely the hand binding up and maybe clearance with the dial, but at any rate Im interested as to whether this is something I should be returning the watch to Breitling for and insisting on being fixed. See below - 1 minute or so of regular running and then 1 minute with the chronograph engaged.  
    • A friend of mine just gave me an old pocket watch. The case is in very bad condition but the movement itself seems to be in a quite good shape. I can't identify which movement is this, since I have to find a missing winding stem. I attach few photos in a case somebody would be able to give some hints.  Thank's folks
    • Hello everyone, I recently received a request for advice on purchasing a vintage watch, a Waltham A-11 ORD. DEPT. I asked if they were aware that these types of watches have radioactive hands and dials... but they had no idea what I was talking about. So, I thought of creating a video that could help recognize them, starting from the distinctive details to using a Geiger counter. I hope you like it and find it useful for those venturing into the world of vintage watches. Bye.     
×
×
  • Create New...