Jump to content

My cheap old hand removing tools: Are they ok for my cheap old watches?

12toneman

By 12toneman
in Tools & Equipment

 Share

Recommended Posts

12toneman Member

12toneman

Posted
Posted (edited)

Are these hand removers OK for my run-of-the-mill Swiss 17-jewels and Vostok watches? I use them, but not with confidence, as I can't tell if they are pinching too hard. Looking for reassurance or otherwise. 

20160730_154520 (3).jpg

Edited by 12toneman
Link to comment
Share on other sites
Vich Distinguished Member

Vich

Posted
Posted

Probably goes without saying but do you put a paper mask on the dial or use a Bergeon (£1.50 on the bay) protector before using the tool.

I notice Mark always uses levers over a plastic bag in his videos - however, his blend of skill and confidence in his abilities has been gained over many years and watches, I still go for the presto.

Cheers,

Vic

  • Like 1
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Neverenoughwatches
      AS 554 from 1930

      By Neverenoughwatches · Posted

      Nice interesting diver Razz, i have a sheffield dress watch, different movement altogether. Could be a wrong motion works part, how does the setting feel before fitting the cannon pinion, clutch and intermediate wheel meshing ok ?  The less traditional setting design could be suspect, the second wheel has a slip clutch assembly, that most likely needs looking at. LA is 42 ° Razz Tbh i  much prefer to call the complete unit the lever, then use the seperate names for all of its components. Such as guard pin, fork, fork horns, fork slot, lever arm, pallets , pallet arms, pallet slot, pallet stones. I suppose pallet fork is the combination of the two opposite ends that make up the lever, its also called the anchor which is descriptive of its appearance.  Its a pretty basic 1930s  swiss lever movement H and yes Nev was meaning the pallet fork.
    • RichardHarris123
      AS 554 from 1930

      By RichardHarris123 · Posted

      The pallet fork should really be called a lever, English lever, Swiss lever etc but most people including myself call it a pallet fork.
    • RichardHarris123
      Seiko 6309a diver crown replacement

      By RichardHarris123 · Posted

      Seiko have case numbers, I  can't see it on your photos.  If you can find that we can look for a genuine crown.  If not, you need to measure the diameter of the stem, the distance between the lugs and the depth of the lugs.  The case number will be something like this. 
    • VWatchie
      AS 554 from 1930

      By VWatchie · Posted

      I'm not sure what kind of movement this is, but I'm curious to know if you're using the word "lever" as a synonym for "pallet fork"?
    • Razz
      AS 554 from 1930

      By Razz · Posted

      Actually kind of rough, maybe munute wheel pinion problems? Is the 2.73mm canion oinion which seems rarer and not availble on Cousins UK. The seconds hand works and suprising nice amplitude but don't know the lift angle and BE this one says 17 j but is a pin pallet as well. Cap jewels on the escape and drive train pivots. Interestingly in has both water proof and shock resistant on the caseback and dial. Puts this around 1969 or '70? The double bezel that works independently is cool has the pi symbol on each. Wonder if it can be used like a slide rule ir something...
×
×
  • Create New...