Jump to content

Help getting a stem and crown for a Peugeot Swiss incabloc watch.

jdrichard
 Share

Recommended Posts

anilv Distinguished Member

anilv

Posted
Posted

Since the female part of the stem looks intact, you may get away with just a stem extender (probably 0.9mm will fit). If you need a new part you need to get the complete set, male and female, to ensure that they fit well.

For the crown you would need the diameter of the crown tube and also specify the material (stainless steel or GP).

rgds

Anil

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted (edited)

The only thing i found now was this? 

It has a split stem. But that must be hard to find one the fits the other. My only guess is? check with the usual places like obsoletewatches and kudarsson. 

http://www.ebay.com/itm/Vintage-Paul-Peugeot-Pocket-Watch-Movement-17-Jewels-Incabloc-34mm-/201560560202

Edited by rogart63
Link to comment
Share on other sites
Cad101 Super WRT Addict

Cad101

Posted
Posted

There's enough thread left for an extender don't forget a spot of thread lock when you attach it . do you own a tap and die set like this its ideal for finding thread sizes.tap.jpg

Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
There's enough thread left for an extender don't forget a spot of thread lock when you attach it . do you own a tap and die set like this its ideal for finding thread sizes.tap.jpg

No I do not. Where do you pick these up?

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites
Cad101 Super WRT Addict

Cad101

Posted
Posted

Ebay quite cheap ideal for stem sizing starts at 0.7 mm up to 2.0 mm then you order your extender when you've figured out the stem dia ive also added stem dia to tap No too.

StemTap-mm-288x300.jpg

Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
Ebay quite cheap ideal for stem sizing starts at 0.7 mm up to 2.0 mm then you order your extender when you've figured out the stem dia ive also added stem dia to tap No too.

StemTap-mm-288x300.jpg

What do I search for on eBay. The tool name? Also, can I simply measure the diameter of the stem or are all threads different? The whole stem world is rather new to ma as I am slowly making my way through all the various problems (setting a roller jewel tomorrow)

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites
Cad101 Super WRT Addict

Cad101

Posted
Posted

Go on jewellery and watches then watches parts and accessories then parts tools and guides and search tap and die set you could measure it with a micrometer or vernier calipers but I would use the die set its safer.

Link to comment
Share on other sites
rogart63 Distinguished Member

rogart63

Posted
Posted
17 hours ago, jdrichard said:

Here is the movement . Looks like I need a crown and half a steam61da6b0af28f2df607f54fecf144f06e.jpgcbc84d69f06b0fbf2454d50e7a99af87.jpg8c455d83c325cd57ba045d8555933a5d.jpgda848a12ad87660f1dbcff6737fe30ea.jpg

I didn't see the half stem before :) A stem extender on that would work nice. I have some old female split stems somewhere. But if they work i don't now? I can post one? PM? 

  • Like 1
Link to comment
Share on other sites
jdrichard Distinguished Member

jdrichard

Posted
  • Author
Posted
Do you think this will work? The threaded parts is approx 0,95  and the female part is approx 1,18 mm . 

DSC06780.JPG

The fat part of the existing piece is 1.2, however, I need to measure this again with a micrometer and not the digital one I used as it misses a decimal place.

Sent from my iPhone using Tapatalk

Link to comment
Share on other sites
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • JeremyLaurenson
      Breitling Navi Heritage (ETA 2892A2) seconds subdial skimpiness...

      By JeremyLaurenson · Posted

      I thought this may be "right" forum to post this. After 7 months out in Switzerland I got my Navitimer back from Breitling. I had sent it off since its 20 years old to have a complete overhaul done... Nothing major wrong, but I did notice this seconds sundial skipping thingy.... $1300 later and 7 months later, I notice the 'skips' are still here unless the chronometer is engaged. I would think this is likely the hand binding up and maybe clearance with the dial, but at any rate Im interested as to whether this is something I should be returning the watch to Breitling for and insisting on being fixed. See below - 1 minute or so of regular running and then 1 minute with the chronograph engaged.  
    • WatchesFarm
      How to recognize radioactive watches.

      By WatchesFarm · Posted

      Hello everyone, I recently received a request for advice on purchasing a vintage watch, a Waltham A-11 ORD. DEPT. I asked if they were aware that these types of watches have radioactive hands and dials... but they had no idea what I was talking about. So, I thought of creating a video that could help recognize them, starting from the distinctive details to using a Geiger counter. I hope you like it and find it useful for those venturing into the world of vintage watches. Bye.     
    • Levine98
      Chinese clone demagnetizers

      By Levine98 · Posted

      I’ve tried everything using both my blue and donut demag units.  I’ve even tried beating them with a steel hammer 🙂   im now trying heating them over gas flame — if that doesn’t work …..
    • Neverenoughwatches
      Chinese clone demagnetizers

      By Neverenoughwatches · Posted

      The 110v supply could be problem with the blue one. Have you tried moving the piece to demag through different orientations manually as its drawn away ? As Nev quoted the magnetic fields of the demag have to overcome those of the steel. 
    • Razz
      Elgin Excelle 17j auto

      By Razz · Posted

      Thank you Marc! I re ran the TG. First I went ahead and checked the balance jewel on the regulator and it was bone dry. I cleaned and oiled it, not without some drama including pinging the capstone and searching my bench with a black light for 30 minutes and finally shone it on my face and looked in the mirror only to find it on my left cheek in my 2 day growth! Back in and on the Grapher we are at 275. However significant drop in DD (234) and CR (190 edited) positions tells me it's time for a complete cleaning and oiling.
×
×
  • Create New...