Jump to content

Its in my blood...

PWR

By PWR
in Introduce Yourself Here

 Share

Recommended Posts

PWR Member

PWR

Posted
Posted

I recently lost my Dad who was a life long horologist [2nd generation.  He ran a family watch repair business which grew to the largest in Phila. and served as the Authorized Service Agencies for many of the top brands like Omega, Ebel and Movado.  Our family all worked at the shop at some time on our lives -- me every summer from age 8 to 18.

Losing Dad has somehow lit a spark and I find myself going through his wide collection, changing batteries, doing small job repairs and discovering some unique time pieces he had collected but never really shared.  I feel his loss but also his warmth as I fiddle with these watches.

I know the basics but look forward to finding answers to some of my questions and attempt to repair some of the partial jobs he put away many years ago.

 

Here is an example of a gem I found in running condition......how cool is this piece from the mod 1800's?   

 

Thanks all in advance.   If only he had found this site in his last years .... he would have been an incredible wealth of information.

 

Steve

 

 

IMG_3310.JPG

  • Like 3
Link to comment
Share on other sites
Vich Distinguished Member

Vich

Posted
Posted

That is one hell of a pedigree Steve and I feel sure you are doing the right thing by taking a step forward into your fathers and ancestors area of expertise.  Hopefully you have a selection of tools and oils to use so why not.  Lovely watch by the way.

I look forward to hearing about how you are getting on.

Cheers,

Vic

Link to comment
Share on other sites
Cad101 Super WRT Addict

Cad101

Posted
Posted

Firstly welcome to this excellent forum. I agree finding something mechanical be it watches clocks engines interesting is in the blood but it can miss a generation or two as it did with me and my grandfather my father wasn't interested but I was fascinated from a very early age I just loved sitting at the side of him at his workbench watching him bring life to something. This stopped for me when he died and my family arrived and had work and a mortgage to see to but I always had this fascination for watches and would even find myself just staring in jewellers windows. So a few years ago I unwrapped what id saved of my granddads tools and set about repairing again I was surprised at just how much he'd actually taught me without really trying. I now have 3 sons one is a computer geek one is in training to become a royal marine commando and only my youngest who is 16 and just left school is interested in watches and has taken apart a few old pocket watch movements and put them back together with varying degrees of success, but he never gets fazed he just breaks it down and starts again. So I agree it is in the blood.

Link to comment
Share on other sites
Vich Distinguished Member

Vich

Posted
Posted

 

There were Clockmakers / Watchmakers / Brassfounders in my line as well, from about 1720 to 1860 it started with Joseph Harlow in Ashbourne, Derbyshire,there were whole families that were in the trade with the fathers apprenticing the sons. The icon I use on my account is a watch made by my ancestor Benjamin Harlow of Lane End, Staffordshire and I have been after a Georgian pocket watch made by him for years now.  They sell quite cheaply and I have missed a couple at auctions.

If it was not for my other hobby, genealogy, I would probably not have known this and I wonder if I would have got into tinkering with watches - maybe 

Cheers,

Vic

Link to comment
Share on other sites
bobm12 Distinguished Member

bobm12

Posted
Posted

Welcome Steve and sorry for your loss...and for not having met your Dad here, as you said. Rest assured he is happy watching you from wherever paradise he is, taking pride in his legacy (not just watchmaking but YOU). I'm sure deep down he knew he was leaving something of him to comfort you after he was gone: his trade and watches.

So, you have come to the right place and we will try and answer any question you come up with. Also, you can be certain we will be listening to your first hand and second hand experiences, acquired by ether doing or watching your family do during all the years in the business. That, Steve, would be amazing and truly a gift for this site...and I assure you we will reciprocate whenever we can.

Cheers,

Bob

 

Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
 Share
Go to topic listing


  • Recently Browsing

    • No registered users viewing this page.

  • Topics

  • Posts

    • Chief
      Generic screws for unknown movements

      By Chief · Posted

      So I found what I believe is the setting lever screw! Am I right in thinking the screw next to the click is the correct one for the setting lever? However if it is, it doesn't fit in the hole which I believe is for it! I can get the lever to sit nicely on the stem and line up with a hole, but the screw only goes as far as the shoulder and stops. It's as though the hole is too small! The dial side has been disassembled by the way, the other wheels are in my tray
    • AlanB
      Gilding after silver soldering

      By AlanB · Posted

      When faced with say a pocket watch bridge which is cracked, silver soldering to repair is often the only option (hopefully someone wasn't there before hand with soft solder). I can generally do this succesfully and tidily with a small torch and miniscule pieces of silver solder, but on parts which were mercury amalgam gilded the heat can have have a deleterious effect on the finish.   I keep wondering if there's a good way to refinish these - and despite having the needful items would rather avoid using the mercury process.   In the past for electronic work I've gold plated PCBs but this involved gold potassium cyanide solution, which also doesn't realy belong at home. I've read that there are now safer alternatives but couldn't find more detail (and importantly how similar are the results to amalgam gilding, since I wouldn't want to refinish the whole watch). Pointers would be very welcome (and yes, I know solutions containing gold won't be cheap!) Alan
    • Neverenoughwatches
      Can anyone identify what this is? Part Two

      By Neverenoughwatches · Posted

      The first one is an Unruh max stake for pushing out staffs
    • JonC
      Can anyone identify what this is? Part Two

      By JonC · Posted

      Ok so with the great answers for my previous question may I ask what these two attachments are used for. The one with the red knob is I assume used for hand setting the seconds hand? Jon      
    • Zedster
      Roamer Searock Crystal problem

      By Zedster · Posted

      According to Cousins site I need to look at document G22 as I think I need an ATGB at 304 but I cant find this size in G22 doc. The last thing I want to do is order the wrong one😳  Unless I cant see the wood for the trees 😆 I could be looking at the wrong style, I assume its classed as Round plastic Armed  https://www.cousinsuk.com/product/wide-ring-gold-atgb
×
×
  • Create New...